12.07.2015 Views

3646 E-911 PSAP Equipment List EPL- Publication - Mississippi ...

3646 E-911 PSAP Equipment List EPL- Publication - Mississippi ...

3646 E-911 PSAP Equipment List EPL- Publication - Mississippi ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

RFP<strong>3646</strong> Information Technology Services May 10, 2011E-<strong>911</strong> <strong>PSAP</strong> <strong>EPL</strong>May 1, 2011 – April 30, 20142.1.4 Please be reminded that this RFP is intended for basic E-<strong>911</strong>systems and large and expensive systems may be the subject of aspecialized RFP and are out of scope of RFP <strong>3646</strong>.2.1.5 Turnkey configurations that are deemed by ITS to be outside thescope of this RFP will not be published.2.1.6 Vendors must fully describe the open configurations.2.2 Two and Four Position Consoles2.2.1 Vendor may propose and describe in the Base System ConfigurationSpreadsheets, the equipment, installation, maintenance and trainingneeded for a basic 2 and 4-position <strong>PSAP</strong> centers. The systems mustbe turnkey with all functionality needed for a basic <strong>PSAP</strong>. Requiredbase minimum specifications and features for all proposed systemsare described below.2.2.2 Vendor should sufficiently describe all equipment in the baseturnkey system. This should include, at a minimum, thefunctionality and description of the system, its console, itstelephones/headsets, display monitors, basic display features forphone and console, and the core system components/card shelf.2.2.2.1 Vendor must describe trunk line capability.2.2.2.2 Vendor must state maximum number of trunksper system.2.2.3 An Administrative Position/lines may be optionally proposed in theComponents <strong>List</strong> Spreadsheet. Alternatively, Vendor may proposesystems that include an administrative position as one of their eightConfiguration slots.2.2.4 Excluded items. The following items should not be included in the“Base Systems Configuration Spreadsheets”. Vendors may proposethese items in the “Component <strong>List</strong> Spreadsheet” section.2.2.4.1 Furniture specific to a <strong>PSAP</strong> installation.2.2.4.2 Logging Recorders. Note that Vendors maypropose a variety of sizes or manufacturers in theComponent <strong>List</strong>.2.2.4.3 CAD systems. Basic CAD systems to supportthe E-<strong>911</strong> system may be proposed in theComponent <strong>List</strong>. However, please be remindedthat large and expensive CAD systems are10

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!