Selection guide for self-regulating heat-tracing systems
Selection guide for self-regulating heat-tracing systems
Selection guide for self-regulating heat-tracing systems
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
T-100 For making tee or splice connections with crimps above theinsulation.Cold applied.Requires 2 pipe straps, to be ordered separately.Part number P/N: 447379-000Required crimp tool, reference: T-100-CT(P/N 954799-000)(Panduit: CT-1570)Under the insulationS-150 For making splice connections with terminals under the insulation.Cold applied.Part number: 497537-000End sealsComponents andaccessories1. Power connectionsEnd seals are used <strong>for</strong> terminating the <strong>heat</strong>ing cable. Approved <strong>for</strong> use in hazardousareas. Select 1 end seal <strong>for</strong> each remote <strong>heat</strong>ing cable end.2. Splices and Tees3. End seals4. Thermostats5. AccessoriesAbove the insulationE-100-EMechanical end seal (Ex e).Cold applied.Requires 1 pipe strap, to be ordered separately.Part number: 101255-000E-100-L2-EMechanical end seal with green LED light module(Ex em).Cold applied.Requires 1 pipe strap, to be ordered separately.Part number: 726985-000Under the insulationE-150-ELow profile end seal (Ex e).Cold applied.Part number: 979099-00016 DOC-565 Rev.2 03/11
Change language