Screwed-Bonnet Needle Valves, JB Series (MS-01-84 ... - Swagelok

Ordering Information and DimensionsSelect an ordering number. Dimensions, in inches (millimeters), are for reference onlyand are subject to change.B1.50(38.1)A1/4 (6.4)max panelthickness2.49(63.2)open1.41(35.8)B 10.38(9.7)2.36(59.9)open1/4 (6.4)max panelthickness1.29(32.8)Dimensions shown with Swagelok nuts finger-tight.➀ Angle-pattern valve orifice is 0.094 in. (2.4 mm).➁ See specifications ISO 7/1, BS EN 10226-1, DIN-2999, and JIS B0203.Safe Product SelectionWhen selecting a product, the total system design mustbe considered to ensure safe, trouble-free performance.Function, material compatibility, adequate ratings,proper installation, operation, and maintenance are theresponsibilities of the system designer and user.Caution: Do not mix or interchange parts with those ofother manufacturers.1.50(38.1)OutletB 2InletB 3 0.38C (9.7)End ConnectionsOrderingDimensions, in. (mm)Inlet/Outlet Size Number C v Orifice A B B 1 B 2 B 3 C1/8 in. SS-2JB 0.091/4 in. SS-4JB0.082(2.1)➀Swagelok3/8 in. SS-6JBtube fitting0.1666 mm SS-6JB-MM(4.2)0.398 mm SS-8JB-MM(straightpattern)Male NPT0.1561/8 in. SS-2JB2(4.0)0.581/4 in. SS-4JB2 (angle 0.166Male ISO➁ 1/4 in. SS-4JB2-RT pattern) (4.2)Male NPT/Swageloktube fittingFemaleNPT1/4 in. SS-4JB11/8 in. SS-2JB40.166(4.2)0.166(4.2)2.26(57.4)2.33(59.2)2.46(62.5)2.33(59.2)2.47(62.7)1.75(44.4)2.00(50.8)2.16(54.9)2.00(50.8)1.13 (28.7)1.06(26.9)1.17 (29.7)1.23 (31.2)1.17 (29.7)1.07(27.2)1.24 (31.5) —0.88 (22.4) —1.00(25.4)1.00 (25.4)1.16(29.5)—1.00 (25.4) 0.88 (22.4)1.44(36.6)1.54(39.1)1.60(40.6)1.54(39.1)1.37(34.8)1.25(31.8) A packing adjustment may be required periodically to increase service lifeand to prevent leakage. Valves that have not been cycled for a period of time may have a higherinitial actuation torque. To increase service life, ensure proper valve performance, and preventleakage, apply only as much torque as is required to achieve positive shutoff.TestingEvery JB series needle valve is factorytested for bubble-tight shutoff at100 psi (6.8 bar) differential pressure.Shell testing is performed to arequirement of no detectable leakageat 1000 psig (69 bar) for valves withPTFE packing or 3000 psig (206 bar) forvalves with Grafoil packing.Cleaning and PackagingAll JB series needle valves are cleanedand packaged in accordance withSwagelok Standard Cleaning andPackaging (SC-10), MS‐06‐62.Options and AccessoriesAngle-Pattern ValvesInsert A after JB in an ordering numberwith B2, B3, and C dimensions listed.Example: SS-2JBABall Stem Tip MaterialAdd -CC for 440C SS or -ST for cobaltbasedalloy to the ordering number.Example: SS-2JB-CCRegulating StemsValves with 316 SS regulating stemshave a maximum flow coefficient (C v ) of0.24 (0.09 with 1/8 in. tube fitting endconnections). Insert R in the orderingnumber.Examples: SS-2JBR; SS-2JBAR2Grafoil Stem PackingOne-piece Grafoil packing extendstemperature ratings to 600°F (315°C)at 1880 psig (129 bar). Add -HT to theordering number.Example: SS-2JB-HTStem Packing KitsStem PackingThree-piece PTFEOne-piece GrafoilOrdering NumberT-4JB-K1G-4JB-K1Stainless Steel Bar HandlesAdd -BG to the ordering number.Example: SS-2JB-BGHandle KitsHandle Ordering NumberStandard greenanodized aluminum barA-4JB-K7-GR316 SS bar SS-4JB-K7Swagelok—TM Swagelok CompanyGrafoil —TM GrafTech International Holdings, Inc.© 2001–2013 Swagelok CompanyPrinted in U.S.A., AGSMS-01-84, R8