30213_User_manual_en.. - KRAFTWERK tools

PRODUCT BRIEFThis Torque Multiplier is used for easy opening of nuts and bolts. It may be ideal in vehicle operation for trucks,buses, construction and agricultural machinery. Due to the compact and lightweight construction, this tool kit canbe stowed away in the vehicle.Thanks to the Planetary gear with a ratio of 1:56 to reach a force of up to 3,200 Nm.thereby be even high-strength or rusted wheel easily solved.CONTENTS AND SPECIFICATIONS• 1 Torque Multiplier 1"• 1 handle• 1 extension 210 mm (Not suitable for use with impact tools! Strong shocks through the use of impact tools candamage the tool). The extension is only together with the crank handle for fast screws used after the screw hasbeen solved.• 7 Sockets: 24-27-30-32-33-36-38 mm• 1 carrying caseMaximum torque: 3,200 NmRatio: 1:562

APPLICATION1. Insert the appropriate socket on the 1" drive. (Pic.1)2. Select a convenient stop. (Pic.2)3. Attach the handle to the opposite end of the tool and turn the crank to loosen the screw. (Pic. 3)4. After unlocking of the nut to remove the device. It is then possible to use the extension (Pic. 4) to completeunscrewing faster.Pic.1Pic.2Pic.3Pic.4IMPORTANT INFORMATIONAttention: This product is not a tightening tool. For tightening, it is imperative to use a torque wrenchrecommended by the manufacturer. An undesired using of the torque multiplier may damage the nuts and bolts.The torque multiplier should be used only by hand. Do not attempt to use it by attaching it to a pneumatic or electricoperated ratchet or impact wrench. This could seriously damage tools and equipment and bring the user in danger.The torque multiplier can only be used with the supplied accessories. Using other accessories may damage thetool, as well as the nuts and bolts, and will cause danger to user.TOOL USE AND CARE1. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger3

industrial tool. The tool will perform better and more safely at the task for which it was intended. Do not modifythis tool or use for a purpose for which it was not designed.2. Securely hold this tool using both hands. Using tools with only one hand can result in loss of control.3. Maintain tools with care. Keep tools clean, and in good condition for a better and safer performance. Followinstructions for lubricating and changing accessories. Inspect tool fittings and alignment periodically and, ifdamaged, have them repaired by an authorized technician or replaced. The handles must be kept clean, dry andfree from oil and grease at all times. A properly maintained tool reduces the risk of binding and is easier tocontrol. Applying excessive force can lead to slips and damage to your work or personal injury.4. Only use the lubricants specified by the manufacturer.5. When not in use for an extended period, apply a thin coat of lubricant to the steel part to avoid rust.6. Maintain the label and name plate on the tool. These carry important information. If unreadable or missing,contact Princess Auto for a replacement.KRAFTWERK Europe AGMettlenbachstrasse 23CH-8617 Mönchaltorf/SwitzerlandTel. +41-44 949 40 50KRAFTWERK Deutschland GmbHLebacher Straße 4D - 66113 SaarbrückenTel. +49 (0) 681 99 63 647www.KRAFTWERK.eu