CTE / CTU9000 pressure transmitter - Sensortechnics

CTE9000 / CTU9000 SeriesOEM pressure transmitters for industrial mediaORDERING INFORMATIONCTx (M) 9xxx x x xCalibrationE: bar calibrationU: psi calibrationFor mbar ranges onlyPressure rangeCTE9000 series CTU9000 series100: 0...100 mbar 1x5: 0...1.5 psi200: 0...200 mbar 003: 0...3 psi350: 0...350 mbar 005: 0...5 psi001: 0...1 bar 015: 0...15 psiN01: -1...+1 bar N15: -15...15 psiP01: 0...-1 bar P15: 0...-15 psi002: 0...2 bar 030: 0...30 psi003: 0...3 bar 050: 0...50 psi005: 0...5 bar 100: 0...100 psi010: 0...10 bar 300: 0...300 psi016: 0...16 bar 500: 0...500 psi020: 0...20 bar035: 0...35 barPressure modeG: gage pressure 1A: absolute pressure(from 1 bar/15 psi only)Output signal0: 0...10 V1: 1...6 V4: 4...20 mA6: 0.5...4.5 V7: 0...5 VPressure connectionStandard threadY: G 1/8" (BSP) male, SS 1.4404 (316L)Optional pressure fittingsD: 1/8" BSPT male, brass, nickel platedE: 1/4" BSPT male, brass, nickel platedF: 3/8" BSPT male, brass, nickel platedG: 1/2" BSPT male, brass, nickel platedK: 1/8" NPT male, brassL: 1/4" NPT male, brassM: 1/8" NPT male, SS 1.4305 (303)N: 1/4" NPT male, SS 1.4305 (303)P: G 1/8" (BSP) male, brass, nickel platedQ: G 1/4" (BSP) male, brass, nickel platedR: G 3/8" (BSP) male, brass, nickel platedS: G 1/2" (BSP) male, brass, nickel platedU: G 1/8" (BSP) female, brass, nickel platedV: G 1/4" (BSP) female, brass, nickel platedW: G 3/8" (BSP) female, brass, nickel platedX: G 1/2" (BSP) female, brass, nickel platedOther pressure ranges and options are widely available. Please contact First Sensor.First Sensor reserves the right to make changes to any products herein. First Sensor does not assume any liability arising out of the applicationor use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.E / 11509 / D6/6www.first-sensor.comwww.sensortechnics.com