COORDINATEDRIVEFLAMESHAPECUTTING.MACHINE

Optional control switchH: Auto-ignition switchI: Preheat switchJ: Torch height control switch(Motorized torch riser - S)8SMOOTH MACHINERUNNINGThe drive of the X and Y traveling carriagesis powered by a combination ofDC servo motor and friction roller bymeans of specially designed reductiongears. Controlled by detection commandsfrom the tracer, the drive motorruns both X and Y carriages simultaneouslyto create the path of thetorch. For positioning, etc., release Xand the Y clutches by lever operation,and The machine will move freely.0 EASY TO HANDLE GASDISTRIBUTION UNITRegulate gas pressure according tothe plate thickness to be cut, and gassupply will be smothly carried outunder the control of the solenoidvalve.0OCUTTINGTORCHESThe standard number of torches is 2but another 2 torches can be fitted.Cutting thickness capacity:200mm (8") with 1 torch150mm (6") with 2 torches100mm (4") with 3 torches50mm (2") with 4 torches0L1GHT AND COMPACTBODY WITHRIGID PEDESTALThe workability is improved by a longerbody than that of the conventional typeand a rail pedestal of more rigid construction,of whose square bars of weldconstruction are particularly resistantto distortion, vibration, heavy load andwear. The precision finish of the travelingrail surface promises high accuracyand sharp cutting.NESTING CUTRECOMMENDEDThe tracer can trace exactly an edge ofO.6mm line width. Thus, it permits continuouscut by nesting which allowseconomical use of steel plate and improvesthe work efficiency greatly.