COORDINATEDRIVEFLAMESHAPECUTTING.MACHINE

SPECI FICATIONSTracing range Width 1525mm (60")Length 1200mm (47-1/4")Cutti ng range Width 1525mm (60")Length 3000mm (118")Minimum torch pacing 55mm (80mm when the auto-(Minimum cutting width)ignition and/or water spraydevice is/are fitted)Number of torches 2 (maximum 4)Cutting thickness capacityCutting surface shapeStraight line cutting200mm (8") with 1 torch150mm (6") with 2 torches100mm (4") with 3 torches50mm (2") with 4 torchesSquare cutting (I-shape)Possible when four directionswitch is used Withoutenergizing tracerhead, machine will strip, (parallelcut) in any of the four pre.selected directions.Automatic lead-in Possible in 4 directionsCutting speed 100-1000mm/min. (4-40in/min.)TracerHL-8 LinatrolDriveTracingLine widthKerf compensationTracing accuracyPosition of control assemblyCoordinate drive by X and Y drivemotorsCircle scanning edge tracing0.6mm (0.024") and wider.Silhouette drawing is permissibleoI=1.5mm(0.06")oI=O.25mm(0.01") deviation fromedge of line on straight line.Left side of the machine whenfacing it.Travel of the machine Roller friction travel controlled byDC servo motor with reductionCutting oxygenCutting oxygen emergencyshut-off solenoid valvePower sourceOxygen/fuel gas pressureMachine weightgear.ON/OFF operations are preformedby solenoid valves.Works on any emergency, linkingwith the tracer.Single phase, AC 100V/115V,50Hz/60HzPressure to be decided inaccordance with our cuttingdata.150kg (340 Ibs.)ACCESSORIESTip. koike 100 series tips,#1, #2, #3Standard tools3 tips/1 torchOne setTip cleaner,lighter, spannersSource lampsFull setFusesFull setPower cable Bm (315") OneGas hoses (cutting oxygen, One each Bm (315")preheat oxygen, fuel gas)