animeo © LON 4 AC Motor Controller WM 220-240 V AC - Somfy

More documents

Recommendations

Info

animeo LON 4 AC MoCo • REF. 5056871 - 46/64
6.7.2 Wind speed alarm functionThis central safety function for the blinds is to prevent damages caused by high wind speeds. In the case of emergency, the blindsare moved to the safety position and blocked!By an activated monitoring of the wind speed signal (SCPTmaxRcvTime) greater than 0,0 seconds, the blinds are also blocked in thesafety position when no wind speed signal is received within the set (SCPTmaxRcvTime).Parameters and their default values:nviWindSpeed current in m/Sek. Wind speed inputSCPTclOffDelay 900,0 seconds Delay time wind alarm deactivationSCPTclOnDelay 2,0 seconds Delay time wind alarm activationSCPTmaxRcvTime 0,0 seconds (deactivated) Sensor monitoringUCPTwindPos7 SET_UP (up limit) Wind safety positionUCPTwindThreshold 6.9 m/Sek. Wind speed threshold value 1A wind alarm is initiated when the following conditions are fulfilled:If nviWindSpeed is for longer than 2,0 seconds (SCPTclOnDelay) higher than 6.9 m/sec. (UCPTwindTreshold). After the wind alarmhas been initiated, the blind is moved with SET_UP to the up limit = wind alarm safety position (UCPTwindPos7). The blinds areblocked during the entire wind alarm!A wind alarm is ended when the following conditions are fulfilled:If nviWindSpeed is for longer than 900 seconds (SCPTclOffDelay) lower than 6.9 m/secs. (UCPTwindTreshold). After ending, the windalarm moves the blinds to the default position (UCPTdefaultPos) if no other signal has been given or an old one is active.6.7.3 Wind direction alarm functionThis direction-oriented safety function for exterior blinds is to prevent damages by high wind speeds. Different to the wind speedalarm function described under 6.7.2, in addition, the wind direction is also evaluated. This has the advantage of being able toreact faster and only the blinds which are affected are blocked in the safety position.During activated monitoring of the wind direction signal (SCPTmaxRcvTime) greater than 0,0 seconds, the blinds are also blocked inthe safety position if no signal has been received within the set (SCPTmaxRcvTime).Parameters and their default values:nviWindSpeed current in m/sec. Wind speed inputSCPTclOffDelay 900,0 seconds Delay time deactivation wind alarmSCPTclOnDelay 2,0 seconds Delay time activation wind alarmSCPTmaxRcvTime 0,0 seconds Monitoring wind direction signalUCPTwindPos7 SET_UP (upper limit) Wind alarm safety positionUCPTwindThreshold 6,0 m/sec. Wind speed threshold value 2nviWindDir current in degrees Wind direction inputSCPTorientation 180,0 degrees Main wind direction of the blindsA wind alarm is initiated when the following conditions are fulfilled:The value of nviWindSpeed is longer than 2,0 seconds (SCPTclOnDelay) greater than 6,9 m/secs. (UCPTwindTreshold) and the valuenviWindDir are in the range of +-90 degrees related to 180,0 degrees (SCPTorientation).After initiation of the wind alarm, the blinds are moved with the SET_UP to the upper limit = wind alarm safety position(UCPTwindPos7). The blinds are blocked during the entire wind alarm!animeo LON 4 AC MoCo • REF. 5056871 - 47/64
Page 4: 6.3 Sunblind actuator #6110 object.
Page 9 and 10: 1.4 Further documentationFurther in
Page 12 and 13: 3.1.1 Signification of the 5 differ
Page 14 and 15: 3.3 Installation of the animeo LON
Page 16 and 17: Upload of the Domain ID through the
Page 18 and 19: animeo LON 4 AC MoCo • REF. 50568
Page 20 and 21: 1 channel, 2 devices, 8 bindings an
Page 22 and 23: Follow the instructions: “Resynch
Page 24 and 25: LONMaker (Visio) exhibits the found
Page 26 and 27: 4 Uploading the application to the
Page 28 and 29: 6.2 Node object #00001 x per LON mo
Page 30 and 31: The found Moco IDs through scanning
Page 32 and 33: 6.2.8 Building position inputTo cal
Page 34 and 35: LonMaker Browser view of the Somfy
Page 36 and 37: 6.3.6 Blinds cycle counterThis coun
Page 38 and 39: 6.4.1 Detailed description of Switc
Page 40 and 41: The remaining 6 modes are local mod
Page 42 and 43: Re-call of a scene is the standard
Page 44 and 45: LonMaker Browser view of the Somfy
Page 48 and 49: A wind alarm is ended if the follow
Page 50 and 51: The suntracking for venetian blinds
Page 52 and 53: After deactivation of the suntracki
Page 54 and 55: Only indoor-temperature controlled
Page 56 and 57: 6.7.11 Room brightness dependent bl
Page 58 and 59: 6.7.16 Occupancy functionWith the o
Page 60 and 61: 6.8.1 Description of details of SOM
Page 62 and 63: 7 GlossaryFor further explanations
Page 64: iwww.somfy.com/DFS/manuals/AUSTRALI

animeo © LON 4 AC Motor Controller WM 220-240 V AC - Somfy

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?