Chapter 13 - Zodiac

Chapter 13Cycle Kraft driver, passenger andshifter pegsThis is where your feet are completely in control. Shifterpegs, foot pegs, steps, brake pedals, floorboards andforward controls. No matter if you are looking for astock replacement part, or a chrome plated CustomBillet Aluminum set of forward controls, everything isthere. New in this issue are “The Factory” parts thatare traditionally hand-cast from bronze or aluminum.They feature a raw cast finish with polished accents.Another new range of products are Cycle Kraftaccessories from Ken’s Factory of Japan that featureoutstanding design and perfect finish.Zodiac’s Slasher floorboards areavailable for driver and passengerin chrome, black and bronzedNo School Choppers“Deathtrap” foot pegs“The Factory”parts aretraditionally handcastfrom bronze oraluminum and feature a rawfinish with polished accentsZodiac’s forward control kit in blackwith highlighted accents fits most BigTwins from 1958 thru 1986 and 1986thru 1999 Softails

Shift & Foot PegsARLEN NESS SOFT TOUCH BILLET FOOT, BRAKE &SHIFTER PEGS• Great styling with excellent traction control• Billet aluminum pegs are available with dimpled or knurled stylerubber inserts• Available in chrome plated or black anodized• Matches Arlen Ness Soft Touch gripsFootpegsA06156Brake/Shifter pegA06157 Engraved, black, dimpled rubberFootpegsA06120Brake/Shifter pegA06122 Scalloped, chrome, knurled rubber13Foot Pegs, Floorboards & Forward ControlsFootpegsA06121A06150A06152Brake/Shifter pegA06123 Scalloped, black, knurled rubberA06151 Scalloped, chrome, dimpled rubberA06153 Scalloped, black, dimpled rubberFootpegsA06158FootpegsA06160Brake/Shifter pegA06159 Smooth, chrome, dimpled rubberBrake/Shifter pegA06161 Smooth, black, dimpled rubberFootpegsA06154Brake/Shifter pegA06155 Engraved, chrome, dimpled rubber13-002

Shift & Foot PegsNESS-TECH FOOT, BRAKE &SHIFTER PEGS• Innovative styles complete the look of yourbike• Matching handlebar grips are also available• All pegs are machined from 6061-T6 billetaluminum and available in chrome platedand/or black anodized• Foot pegs are male mount as used on mostHarley-Davidson models for driver and/orpassenger pegs• Mounts to install these pegs on crash barsare also availableRetro, chromeA07490 FootpegsA06312 Replacement rubbersA07491 Brake/Shifter pegA06313 Replacement rubbersBattistini Oval Hole, chromeA07466 FootpegsA07468 Brake/Shifter pegComfort Deep Cut, chromeA06115 FootpegsA06118 Brake/Shifter pegDeep Cut, chromeA06470 FootpegsA06471 Brake/Shifter pegDeep Cut, blackA06472 FootpegsA06473 Brake/Shifter pegRocket, chromeA07478 FootpegsA06310 Replacement rubbersA07479 Brake/Shifter pegA06311 Replacement rubbersBattistini Round Hole, chromeA07460 FootpegsA07462 Brake/Shifter pegBattistini Round Hole, blackA07480 FootpegsA07481 Brake/Shifter pegBattistini Oval Hole, blackA07482 FootpegsA07483 Brake/Shifter pegDiamond FlatbandA06475 FootpegsA06328 Replacement rubbersA06477 Brake/Shifter pegA06309 Replacement rubbersFlamed, chromeA06460 FootpegsA06308 Replacement rubbersA06462 Brake/Shifter pegA06309 Replacement rubbers13Foot Pegs, Floorboards & Forward ControlsKnurled Flare Tip, chromeA06140 FootpegsA06141 Brake/Shifter peg13-003

Shift & Foot PegsFlamed, blackA07484 FootpegsA06308 Replacement rubbersA07485 Brake/Shifter pegA06309 Replacement rubbersTen-Band, chromeA06143 FootpegsA06398 Replacement rubbersA06144 Brake/Shifter pegA06399 Replacement rubbersDiamond Twist, chromeA06455 FootpegsA06457 Brake/Shifter peg13Knurled, chromeA06410 FootpegsA06308 Replacement rubbersA06413 Brake/Shifter pegA06309 Replacement rubbersTwister, chromeA06450 FootpegsA06452 Brake/Shifter pegA07190 Chrome 1 1/4" clamp-on pegmounts for crash barsFoot Pegs, Floorboards & Forward ControlsHorizontal, chromeA07474 FootpegsA07476 Replacement rubbersA07475 Brake/Shifter pegA07477 Replacement rubbersTorpedo, chromeA06464 FootpegsA06400 Replacement rubbersA06465 Brake/Shifter pegGrooved, chomeA07115 FootpegsA07116 Brake/Shifter pegGrooved, blackA07472 FootpegsA07473 Brake/Shifter pegStepped, chromeA07118 Footpegsa07123 Brake/Shifter pegCUSTOM O-RING RIDERS PEGSShow-chromed die-cast custom pegs. FitsSportster 1954 thru 1990,FX 1971 thru 1985riders peg and FLH passenger(OEM 50939-52).362013 O-ring riders pegsO-RING RIDERS PEGSFits FXR models from 1982 thru 1994 as wellas 1991 to present Sportster and Dynamodels (OEM 50913-89T).362115 O-ring rider pegs13-004

Shift & Foot PegsO-RING PASSENGER PEGSShow-chromed die-cast custom pegs. Fitsmost stock Hi-Way brackets as well aspassenger brackets on FX/FXR and Sportstermodels. Available in two lengths, one as astock replacement length, the other is 1"longer than stock for extra comfort.362029 Stock length362033 1" Longer than stockHIGHWAY CRUISER BARDesigned for the late 1984 to presentEvolution Sportster model with alternatormotors. Easily mounted between the lowerfront motor mounts. Complete with O-ringfoot pegs.362102 Highway barCUSTOM JB STYLE SHIFT PEGHighly polished aluminum shift peg.Fits mostOEM and aftermarket shift levers. A perfectmatch with our JB- style foot pegs as shownelsewhere in our catalog.292087 JB Style polished aluminumshift pegSHIFT PEGFits all models with threaded shifter arms.Sold each (OEM 34611-65).362021 O-ring shifter peg, chromeUNIVERSAL O-RING FOOT PEGSChrome plated die-cast foot pegs withmounting blocks. For many customapplications.Mounting blocks have 3/8" UNFthreaded hole.362019 Footpeg O-ringUNIVERSAL CUSTOM O-RINGFOOT PEGSShow-chromed universal foot pegs for manycustom applications. Easily mounts to frameor crash bars.362024 Foot pegs with clamp362017 Pegs onlyREPLACEMENT O-RINGS FORCUSTOM O-RING PEGSRings are packed and sold in bags of 10 pcs.022343 O-rings small, fit shift andkickpedal022342 O-rings medium, fit motormount foot pegs022344 O-rings large, fit drivers peg022341 O-ring flat kickpedal022346 O-ring black diamond (24 pack)J.B. STYLE ALUMINUM FOOTPEGS WITH STUDSThe look of the future. These aluminum footpeg sets will add a High-Tech look to yourmotorcycle.The finishing touch for those whowant to go just that little bit further than otherbike builders. Foot peg set comes completewith studs which allows the use on all Harleymodels and many other Custom applications.361093 JB style Aluminum foot peg setwith stud"THE FACTORY" CAST BRAKEAND SHIFTER PEGHand cast from brass by "The Factory" usingtraditional casting methods. Threaded to fitmost applications. Great vintage looks thatcan be combined with other cast accessoriesfrom "The Factory" found elsewhere in thiscatalog. Sold each.735465 Brass brake/shifter pegFOLDING CUSTOM-PEGS WITHCLAMPBeautifully chrome-plated and LOW PRICEDfolding pegs. Features two sizes of clamp forframe or crash-bar mounting.1. 361002 Holly2. 361004 Heart3. 361005 Spade4. 361001 Diamond5. 361006 Club6. 361000 Ribbed13Foot Pegs, Floorboards & Forward Controls13-005

Shift & Foot PegsISO PEGSThese state-of-the-art high quality foot pegsare designed to absorb vibration through useof hollow-core wear-resistant rubber inserts.They are mounted into the peg with a chromeallen bolt. If you are tired of changing O-ringson your old pegs, these are the pegs youneed. ISO pegs may be used on early or latemodels, but are also available in a universalstyle for many custom applications.361048 Pegs only without clamps, 5/8"female mount361059 Passenger pegs fits Sportstermodels 1972 thru 1990, FX(R)models 1971 to present361061 Rider pegs fit FXR models 1982thru 1994 as well as 1991 topresent Sportster and DynaGlide361056 Large replacement rubbers, soldin packs of 8361057 Small replacement rubbers, soldin packs of 8EXTENDED ISO SHIFT PEGWhen you're tired of your boot slipping offyour shifter peg, you'll love this shifter peg.It is 1 5/8" longer than our stock ISO shiftpeg (ZPN 361049) to make it more suitablefor man-sized boots.362047 Extended ISO shift peg361058 Replacement rubbers (set of 3)Note: Can not be used as kickstartpedal!361059 Bar pegs, small male mount13EXTENDED ISO PEGSThese extended ISO footpegs provide moresupport to your feet.Available in either a 1"or a 2" extended length,in both small or largemale mount.Foot Pegs, Floorboards & Forward Controls361060 Reinforced ISO rider pegs formodels with large femalemount, pegs have steel insertsfor extra strength361050 Universal with clamps, mountsto frame or crash bar361049 Shifter peg, iso style361058 Replacement rubbers (set of 3)FOLDING CUSTOM FOOT PEGSWITH RUBBER INSERTSTapered style chrome custom foot pegs withrubber inserts for extra comfort and grip.Come with clamps for installation on both 1"(2.54 cm) and 1 1/4" (3.2 cm) tubing,commonly used as frame tube or for highwaybars and engine guards. Foot pegs andmounting blocks have a total length of 5 7/8"(14.5 cm). The 5/8" (16 mm) squaremounting blocks are 3/8-24 UNF threaded,so pegs can also be installed without themounting clamps. Sold in pairs.351199 Tapered style chrome customfoot pegs with rubber insertsSmall male mount, fits mostOEM High-Way bars as well asmost passenger pegs.361131 1" extended361132 2" extendedLarge male mount, fits riders pegson FXR 1982 thru 1994, Dyna Glidemodels 1991 to present andSportster models 1991 to presentwith this type mount.361133 1" extended361134 2" extended13-006

Shift & Foot PegsSTREAMLINER KICK START PEDALThis Streamliner kick start pedal is a perfectmatch with our other Streamliner accessories.358046 Kick-start pedal stock lengthSTREAMLINER RIDER PEGSFEMALE MOUNTBeautiful model Streamliner foot peg set.Theyfeature a thick one piece rubber inside toabsorb vibration and are covered by a sleevedchrome plated cover to add a touch of classto your bike. Replaces riders pegs on all 1952to present with female mount and FLHpassenger pegs. These pegs are a perfectmatch with our Streamliner shift peg andthrottle grips.361070 Streamliner foot pegs, femaleSTREAMLINER RIDER PEGS MALEMOUNTBeautiful model Streamliner foot peg set.Theyfeature a thick one piece rubber inside toabsorb vibration and are covered by a sleevedchrome plated cover to add a touch of classto your bike. Replaces riders pegs on FXRmodels 1982 thru 1994 as well as Sportsterand Dyna Glide models 1991 to present withmale mount.These pegs are a perfect matchwith our Streamliner shift peg and throttlegrips.361071 Streamliner foot pegs, male,stock length13WIDE STREAMLINER FOOT PEGSFor those who want to add that somethingspecial to their bike and increase the bike'scomfort at the same time, these foot pegs arethe solution. They feature the same populardesign as all the other Streamliner foot pegsand grips, but they are wider, offering extrasupport and comfort for your feet. Availableto replace FXR driver pegs 1982 thru 1994and Sportster and Dyna Glide 1991 to presentstock foot pegs.361122 Foot peg set, male mountSTREAMLINER SHIFT PEGStreamliner shift peg to match our line ofStreamliner products like foot pegs andhandlebar grip sets. Fits all models withthreaded shift levers. Sold each.361076 Streamliner shift pegSTREAMLINER PASSENGER PEGSChrome plated die-cast passenger pegs withone piece rubber insert to absorb vibrationand add a superb custom look to your bike.Fits Low Rider stock Hi-Way bracket and rearbracket on Sportster and FX models. Perfectmatch with our other Streamliner products.361073 Streamliner passenger pegsUNIVERSAL STREAMLINER FOOTPEG SETStreamliner foot peg set with universal squarefemale mount for all kind of customapplications and for forward control kit use.Use in combination with our Streamliner footpegs and throttle grips.361075 Streamliner foot pegsSTREAMLINER SWITCHBLADEFOOT PEGSStreamliner Switchblade foot pegs are sleek,versatile, and exceptionally comfortable. Infolded mode, they provide a large, rubberisolatedsurface-area. When you deploy theconcealed heel rests you add fatigue-fightingcomfort.You don't have to pull over to deployor retract these heal rests, as this can be donewith your boots while riding.These foot pegswork in any peg location, especially onforward controls or as forward mountedcruise pegs. Pegs are 5" (13 cm) long andfeature rotating and lockable male mounts.351486 Streamliner Switchblade footpeg setFoot Pegs, Floorboards & Forward Controls13-007

Shift & Foot PegsSPEEDLINE FOOT PEGSFor a touch of class we have added a groovedend cap to our popular Streamliner foot pegs.These beautiful foot pegs feature a thickrubber "Vibration Absorbing" sleeve coveredby a slotted, chrome plated cover and areavailable for most applications.JB STYLE FOOTPEGSChrome plated foot pegs with wide rubberbands that not only look good, but are veryfunctional too. The rubber bands stop yourfeet from slipping off the pegs absorb,vibrations and guarantee a comfortable ride.Will match perfectly with our grip sets ZPN351537 & 351535.UNIVERSAL MOUNTFits 5/8" square mount. For most forwardcontrol and many other custom applications.361089 Small, 5/8" female mountLARGE DIAMETER SPEEDLINEFOOT PEGS, FEMALE MOUNTLarge riders peg fits all Sportster and FXmodels from 1952 to present with this typefoot peg mount as well as FLH passengerpegs.361121 Speedline peg set, largediameter femaleLARGE FEMALE MOUNTFits Sportster models and FX models 1952and later with this type mount aswell as FLHpassenger mount.361084 Large, female mountSHIFTER PEGFits all models with threaded shifter arms.361090 Shift peg13Foot Pegs, Floorboards & Forward ControlsSPEEDLINE FOOT PEGS LARGEDIAMETER, MALE MOUNTFits riders pegs on FXR models 1982 andlater, Dyna Glide models 1991 to present andSportster models 1991 to present with malemount.361119 Speedline peg set, largediameter maleLARGE MALE MOUNTFits riders peg on FXR models 1982 thru1994, Dyna Glide models 1991 to presentand Sportster models 1991 thru present withthis type mount.361085 Large, male mountSMALL MALE MOUNTFits most stock Hi-Way brackets on FX andXL models and most passenger pegs.361087 Small, male mountCHROME FOLDING PASSENGERPEGSThese chrome folding passenger pegsperfectly match our ZPN 056150 and ZPN056151 forward control sets. For safety andconvenience purposes of your passenger thepegs feature rubber bands. "Easy to install"stock replacement pegs.351366 Chrome folding passenger pegsSPEEDLINE FOOT PEGS SMALLDIAMETER, MALE MOUNTFits riders pegs on FXR models 1982 andlater, Dyna Glide models 1991 to present andSportster models 1991 to present with malemount.361116 Speedline peg set, smalldiameter male13-008

Shift & Foot PegsRSD MOTO-X STYLE FOOT PEGSRoland Sands designed these foot pegsbecause of his passion for motocross styling.Intentionally designed with a featherweight,ventilated body and aggressive foot patternfor performance and grip. Pegs are a directreplacement for the stock male mount driverand passenger pegs. CNC machined frombillet aluminum with a black anodized orchrome finish. Fits with the stock hardware.A chrome pivot bolt and nut kit is availableseparately.Fits all models with straight malemount740698 Black anodized Moto-X footpeg set740699 Chrome Moto-X foot peg setFits all models with 45 degreemale mount742998 Black anodized Moto-Xfoot peg set742999 Chrome Moto-X foot pegset740704 Chrome pivot bolt and nut kitfor 1 pair of foot pegsROLAND SANDS TRACKER FOOT& TOE PEGSComfort and control are obviously veryimportant when ripping down the highway.These billet aluminum foot peg sets andshifter pegs feature custom knurled RSDrubbers and RSD laser engraved logo's.Shifter Pegs751860 Contrast Cut751861 Chrome751862 Black OPS751863 BrassFoot peg sets, 45 degree malemount fit all Dyna and Sportstermodels751868 Contrast Cut751869 Chrome751870 Black OPS751874 BrassFoot peg sets, straight malemount fit Softail models751871 Contrast Cut751872 Chrome751873 Black OPS751875 BrassROLAND SANDS CHRONO FOOT& SHIFTER PEGSTime is on your side with the RSD Chrono line.Inspired by unique time pieces, the Chronoline offers a high level of detailing and design.CNC machined from billet aluminum. Pegsfeature custom knurled RSD rubbers. Comewith interchangeable black and brass RSDLogo Badges.Shifter pegs, sold each751864 Contrast Cut751865 Chrome751866 Black OPS751867 BrassMale mount foot pegs, sold inpairs751876 Contrast Cut751877 Chrome751878 Black OPS751879 Brass13Foot Pegs, Floorboards & Forward Controls13-009

Shift & Foot Pegs13Foot Pegs, Floorboards & Forward ControlsDEATHTRAPS BMX STYLE FOOTPEGSTake pride in your chop with these supercustom BMX style foot pegs made by NoSchool Choppers. Black powder coated steelconstruction peg stands with bear trap BMXpedals in black.Yes they spin.Yes they will fityour foot controls as long as you have femalepeg stands. Yes they are super fun to ridewith. Yes they are the trickiest foot pegs onthe market.Yes you should buy them and bethe envy of all your friends.Yes, they are soldin pairs.747132 Deathtrap foot peg set, malemountPRO-ONE SCIMITAR FOOTPEGSSharp edged, drilled and all chrome billetaluminum, a very nice yet functional designby Pro-One. Foot pegs have a deep inset toprevent slipping. Fits all models using maleend foot pegs. Overall length is 6 1/2"(17 cm).731900 Scimitar footpegsCYCLE KRAFT NEO FUSION FOOT& SHIFTER PEGSCycle Kraft "Neo Fusion" foot pegs andshifter pegs sets are CNC machined by Ken'sFactory in two different designs and areavailable in a polished finish or blackanodized with clear cuts.Shifter pegs are soldeach and have a 5/16" UNF stud and can alsobe used as a brake peg on most threadedbrake arms. Foot pegs are available for driverand passenger use and are sold in pairs.Driver pegs are 4 1/2" (11.5 cm) long and 13/16" (3 cm) in diameter. Passenger pegs are4" (10 cm) long and 1 1/16" (2.7 cm) indiameter.Both rider and passenger pegs havea 7/16" (11 mm) male mount. All pegsfeature bronze end caps.Black anodized with clear cuts andbronze end caps747247 Driver peg set, Neo Fusiondesign747251 Driver peg set, Neo FusionSpiral design747248 Passenger peg set, Neo Fusiondesign747252 Passenger peg set, Neo FusionSpiral design747255 Shifter peg, Neo Fusion design747257 Shifter peg, Neo Fusion SpiraldesignPolished with bronze end caps747249 Driver peg set, Neo Fusiondesign747253 Driver peg set, Neo FusionSpiral design747250 Passenger peg set, Neo Fusiondesign747254 Passenger peg set, Neo FusionSpiral design747256 Shifter peg, Neo Fusion design747258 Shifter peg, Neo Fusion SpiraldesignBILTWELL STAINLESS STEEL FOOTPEGSMale mount foot pegs that can be used forall small male mount applications. The malemount can be turned in any position and isthen secured from the inside with theincluded socket head screws. Made fromstainless steel and come with a black orpolished finish. Sold in pairs.751840 Polished751841 Black13-010

Shift & Foot PegsARLEN NESS FUSION FOOT PEGS•The perfect fusion of traction, style andcomfort•Fusion male mount foot pegs are made fromforged steel for extreme durability, knurledrubber inserts for excellent traction and billetaluminum accents for a great look.•Fusion shifter pegs are molded rubber pegsthat feature an integrated mounting studwith billet aluminum accents.•Several styles to choose from in chrome andblack anodized finishes•Matching handlebar grips can be found inChapter 14 of the Zodiac Bikers BookA07900 Slot Track foot pegs, ChromeA07910 Slot Track brake/shifter peg,ChromeA07901 Slot Track foot pegs, BlackA07911 Slot Track brake/shifter peg,BlackA07906 Ring Leader foot pegs, ChromeA07916 Ring Leader brake/shifter peg,ChromeA07907 Ring Leader foot pegs, BlackA07917 Ring Leader brake/shifter peg,BlackA07908 Deep Cut foot pegs, ChromeA07918 Deep Cut brake/shifter peg,ChromeA07909 Deep Cut foot pegs, BlackA07919 Deep Cut brake/shifter peg,BlackA07920 Smoothie foot pegs, ChromeA07922 Smoothie brake/shifter peg,ChromeA07921 Smoothie foot pegs, BlackA07923 Smoothie brake/shifter peg,BlackA07924 Knurled Rubber foot pegs,ChromeA07926 Knurled Rubber brake/shifterpeg, ChromeA07925 Knurled Rubber foot pegs,BlackA07927 Knurled Rubber brake/shifterpeg, BlackCHOPS 76 MALE MOUNT FOOTPEGSThese great and classy looking foot pegs areof Italian design. Pegs feature male mountssuitable for most rider and passengerapplications.They are sold in pairs in chrome,black anodized or black anodized withhighlighted accents, CNC machined formsolid billet aluminum or polished brass.743396 Classic Line, Chrome743397 Classic Line, Black743399 Classic Line, Black withhighlighted accents743398 Classic Line, polished brass743413 Arrow Line, Chrome743414 Arrow Line, Black743415 Arrow Line, polished brass743416 Slim Line, Chrome743417 Slim Line, Black743418 Slim Line, polished brassCHOPS 76 SWIVEL MOUNTFOLDING FOOT PEGSThese foot pegs are a perfect example ofItalian design. Perfectly machined and thefinishing touch of your bike. Pegs are foldingand come with male mounts suitable for mostrider and passenger applications.These pegsare of non slip ribbed design and the swivelmount will also turn very comfortable parallelto your boots.Pegs are sold in pairs in chromeor black anodized billet aluminum in variousdesign styles. The BMX style pegs are alsoavailable in pure brass.743419 Cross Line, Chrome743420 Cross Line, Black743434 Round Cross Line, Chrome743435 Round Cross Line, Black743410 BMX Line, Chrome743411 BMX Line, Black743412 BMX Line, brass13Foot Pegs, Floorboards & Forward Controls13-011

Shift & Foot Pegs13Foot Pegs, Floorboards & Forward ControlsCYCLE KRAFT FOOT & SHIFTERPEGSCycle Kraft foot peg sets and shifter pegs areCNC machined by Ken's Factory in fourdifferent designs and are available in apolished finish or black anodized with clearcuts. Shifter pegs are sold each and have a5/16" UNF stud and can also be used as abrake peg on most threaded brake arms. Footpegs are available for driver and passengeruse and are sold in pairs. Driver pegs are4 1/2" (11.5 cm) long and 1 3/16" (3 cm) indiameter.Passenger pegs are 4" (10 cm) longand 1 1/16" (2.7 cm) in diameter. Both riderand passenger pegs have a 7/16" (11 mm)male mount.Dimpled design747232 Driver peg set, polished747241 Driver peg set, black anodizedwith clear cuts747233 Passenger peg set, polished747242 Passenger peg set, blackanodized with clear cutsSpiral design747234 Driver peg set, polished747243 Driver peg set, black anodizedwith clear cuts747235 Passenger peg set, polished747244 Passenger peg set, blackanodized with clear cutsRibbed design747239 Driver peg set, polished747245 Driver peg set, black anodizedwith clear cuts747240 Passenger peg set, polished747246 Passenger peg set, blackanodized with clear cutsShifter pegs747236 Polished747237 Black anodized with clear cutsPAUL YAFFE'S BAGGER NATIONCLASSIC PEGSPaul Yaffe's exclusive urethane compoundbrings unparalleled pleasure to your ride.Perfect fit, perfect length, perfect feel.Matching Classic handlebar grips featureremovable end caps that make yourhandlebars a really cool place to stash yourregistration or whatever you feel like hiding.745022 Classic male mount rubber pegs745023 Classic shifter peg745021 Classic rubber handlebar grips,fit all models with cableoperated throttle 1982 topresent, except those withhandlebar air reservoirs.PAUL YAFFE'S BAGGER NATION"ALI-BABA" PEGSPaul Yaffe's exclusive top-secret urethanecompound brings unparalleled pleasure toyour ride. Perfect fit, perfect length, perfectfeel. Matching Ali-Baba handlebar gripsfeature removable end caps that make yourhandlebars a really cool place to stash yourregistration or whatever you feel like hiding.745019 Ali-Baba male mount rubberpegs745020 Ali-Baba shifter peg745018 Ali-Baba rubber handlebargrips, fit all models with cableoperated throttle 1982 topresent, except those withhandlebar air reservoirs.PAUL YAFFE'S BAGGER NATIONBULLET PEGSPaul Yaffe's exclusive top-secret urethanecompound brings unparalleled pleasure toyour ride. Perfect fit, perfect length, perfectfeel. Matching Bullet handlebar grips featureremovable end caps that make yourhandlebars a really cool place to stash yourregistration or whatever you feel like hiding.745016 Bullet male mount rubber pegs745017 Bullet shifter peg745015 Bullet rubber handlebar grips,fit all models with cableoperated throttle 1982 topresent, except those withhandlebar air reservoirs.13-012

Shift & Foot PegsPRO-ONE BILLET FOOT PEGSFIXED STYLEPro-One designed these foot pegs with adeep inset foot surface to keep your foot onthe peg. Comes chrome plated for showquality looks. Fits all models using male endfoot pegs, 5 1/2"(14 cm) overall length.237845 Ball milledRETRO STYLE KNURLED BILLETALUMINUM FOOT & SHIFTERPEGSThe "Retro" design originates from the dragrace strip where drivers need all grip they canget,both on the tarmac as well on handlebarsand foot pegs. Matching handlebar grips canbe found in Chapter 14. "Retro" male mountfoot peg sets and shifter pegs fit most stockand aftermarket foot controls. Available inplain aluminum, chrome, bronze anodized orblack anodized with clear highlights.DIAMOND PASSENGER PEGSMALE MOUNTFits Low Rider stock Hi-Way bracket and rearbracket on Sportster and FX models.361080 Diamond foot pegsNote: Can not be used as kickstart pedal!PRO-ONE ADJUSTABLE BILLETFOOT PEGSSome bikes have angled mounts that willpoint the inset foot surface on custom pegsat an uncomfortable angle. We solved thisproblem by inventing the first adjustable footpeg. Simply loosen the center bolt and adjustthe peg to the most comfortable angle. Fitsall models using male end foot pegs, 5 1/2"(14 cm) overall length.237872 Adjustable footpegs chromeDIAMOND DRIVER PEGS LARGEFEMALE MOUNTRiders peg for all Sportster and FX modelsfrom 1952-up with largefemale mount andpassenger for FLH models (OEM 50939-52).361077 Diamond foot pegsFoot peg sets353001 Bronze353004 Black with clear aluminumhighlights353007 Chrome353010 Plain aluminumBrake or shifter pegs353002 Bronze353005 Black with clear aluminumhighlights353008 Chrome353011 Plain aluminumDIAMOND DRIVER PEGS MALEMOUNTFits original clevis mount on most models.Has the same diameter as original part.361078 Footpeg setDIAMOND UNIVERSAL MOUNTPEGSSquare female mount, fits 5/8" square barmount as used on many forward controls andmany custom applications.361082 Diamond foot pegsDIAMOND SHIFT PEGFits all models with threaded shift levers.361083 Diamond shift peg13Foot Pegs, Floorboards & Forward Controls13-013

Shift & Foot PegsREPLACEMENT RUBBER PADSWITH "LIVE TO RIDE" LOGOReplacement rubber pads for our line of "Liveto Ride" foot pegs.358091 Fits driver pegs (pair)358092 Fits passenger pegs (pair)358093 Fits shift pegs (each)CHOPS 76 BRAKE & SHIFTERPEGSAdd a touch of tasteful Italian design to yourAmerican ride with Chops 76 brake andshifter pegs. Available in chrome or blackanodized billet aluminum or polished, puresolid brass. Sold each.743421 Chrome billet aluminum743422 Black anodized billet aluminum743423 Solid brassEXTENDED CONTROL PEGS FORFXWG AND SOFTAIL MODELSOriginal style extended foot pegs withchrome shank. Available with or withoutchrome end caps.Pegs are over an inch longerthan stock,they provide just the right amountof additional comfort when a custom aircleaner,carburetor or tank make the standardshort pegs difficult to use. Can also be usedas passenger pegs to clear the shotguns orother custom exhaust system.362117 Extended control pegs withchrome end caps13Foot Pegs, Floorboards & Forward ControlsISO-STYLE HEEL RESTTo provide more comfort and support for yourlegs and feet, these heel rests are just theticket. The chrome plated brackets withrubber heel supports can be adjusted to anydesired angle to give the support and comfortof floorboards without loosing the slick looksoffoot pegs. They mount easily to anystockstylefemale clevis.361104 ISO heel restDIAMOND SHAPED FLAT FOOTPEGSThese beautifully shaped pegs are availablein plain or with three-dimensional V-Twinemblem. Both are Hi-Lited by a black outline.They have special molded rubber O-rings toprevent your feet from slipping whileproviding a striking contrast against thebright chrome.361036 Peg set with clamp and V-Twinlogo361034 Peg set with clamp, plain022346 O-ring black diamond (24 pack)RIDERS PEG WITH CHROME ENDBlack ribbed rubber pegs with chrome end.Fits all models FX and XL (OEM 50939-52).361541 Rider pegsUNIVERSAL FOOT PEG WITHCHROME ENDFits all 5/8" square bar, a perfect match withour chrome end riders peg ZPN 361541 andour chrome end kick starter pedal ZPN362062. Has black ribbed rubber.362042 Universal foot peg setKUSTOM TECH VINTAGE PEGSNostalgic looking pegs, made from billetaluminum with a polished or black finish andfeature polished brass accent rings.Foot pegsare sold in pairs and fit 7/16" female mounts.Matching brake and shifter pegs are alsoavailable and are sold each.A perfect matchwith Kustom Tech's handlebar grips andhandlebar controls found in the handlebarsection of this catalog.751180 Polished aluminum foot pegswith polished brass accents751181 Black aluminum foot pegs withpolished brass accents751182 Polished aluminumbrake/shifter peg with polishedbrass accents751183 Black aluminum brake/shifterpeg with polished brass accentsNOTE: ALL DRIVERAND PASSENGER PEGSARE SOLD IN PAIRS13-014

Shift & Foot PegsFABRIC TAPE PEGSNostalgic looking pegs covered with fabrictape. Pegs are made from billet aluminumwith a polished finish and polished brass endcaps. Foot pegs fit 7/16" female mounts.Matching brake and shifter pegs are alsoavailable and are sold each.751184 Kustom Tech fabric tape footpeg set751185 Kustom Tech fabric tapebrake/shifter pegTORNADO II MALE MOUNT PEGSTornado II passenger pegs are machined frombillet aluminum with a chrome or blackanodized finish.They feature rubber wrappingwith protruding stars,crosses or checkers thatprovide extra comfort and a non-slip grip toyour boots. The end caps feature the LoneStar design. Pegs have a 5" (12.73 cm) overall length, are 1 1/2" (3.8 cm) in diameterand fit the stock clevis on most modelsMatching handlebar grips can be found inChapter 14, brake and shifter pegs can befound in Chapter 9.351952 Chrome, Lone-Star design351953 Black, Lone-Star designPASSENGER PEG SET FORSOFTAIL MODELSThis kit mounts in the existing tapped holesin the frame below the seat. Providesalternative footrest position for thepassenger. Fits all Softail models from 1984to present, not recommended for Fat Boy orHeritage Softail Classic models due to thewidth of their seats. Bracket set is alsoavailable separately to permit the installationof the foot pegs of your choice.361029 Complete kit with foot pegs361031 Bracket set onlyTORNADO II MALE MOUNTRIDER AND PASSENGER PEGSTornado II male mount pegs are machinedfrom billet aluminum with a chrome or blackanodized finish. The end caps have the FourCross or smooth design and to provide extracomfort and a non-slip grip to your boots,they feature rubber wrapping with the FourCross version also having protruding crosses.Pegs have a 6" (15.3 cm) over all length andare 1 3/8" (3.5 cm) in diameter. Pegs featuremale mounts suitable for most rider andpassenger applications. Matching handlebargrips can be found in Chapter 14.351832 Chrome, Four Cross design351833 Black, Four Cross design351837 Chrome, Smooth design351838 Black, Smooth designTORNADO II RIDER ANDPASSENGER PEGSTornado II rider and passenger pegs aremachined from billet aluminum with achrome finish.They feature rubber wrappingwith protruding stars,crosses or checkers thatprovide extra comfort and a non-slip grip toyour boots. The end caps feature the LoneStar, Four Cross or smooth design. Pegs havea 6" (15.3 cm) over all length and are 1 3/8"(3.5 cm) in diameter. Rider pegs are 3/8"-16UNC threaded; passenger pegs are 1/2"-13UNC threaded.Matching handlebar grips canbe found in Chapter 14.Tornado II Tornado IIrider pegs passenger pegs351814 351816 Chrome, FourCross design351815 351817 Black, FourCross design351804 351806 Chrome, LoneStar design351805 351807 Black, Lone Stardesign351824 351826 Chrome,Smooth design351825 351827 Black, Smoothdesign13Foot Pegs, Floorboards & Forward Controls13-015

Shift & Foot Pegs13Foot Pegs, Floorboards & Forward ControlsTURBO MALE MOUNT RIDERAND PASSENGER PEGSTurbo rider and passenger pegs are machinedfrom billet aluminum and then chromeplated, black anodized or bronze anodized.They feature rubber wrapping to provide extracomfort and a non-slip grip to your boots.Pegs have a 6" (15.3 cm) over all length andare 1 3/8" (3.5 cm) in diameter. Pegs featuremale mounts suitable for most rider andpassenger applications. Matching handlebargrips can be found in Chapter 14.351705 Chrome,Turbo design withblack rubbers351706 Black,Turbo design with blackrubbers351707 Bronzed,Turbo design withblack rubbers351995 Chrome,Turbo design with greyrubbers351996 Black,Turbo design with greyrubbers351997 Bronzed,Turbo design with greyrubbersTURBO BRAKE AND SHIFTERPEGSTurbo brake and shifter pegs are machinedfrom billet aluminum and then chromeplated, black anodized or bronze anodized.They feature rubber wrapping to provide extracomfort and a non-slip grip to your boots.Sold each and measure 2 1/2" (6.4 cm) longand 1" (2.5 cm) in diameter.They are 5/16-18UNC threaded and are easy to bolt on to moststock and aftermarket control kits. Matchinghandlebar grips can be found in Chapter 14.Matching rider and passenger pegs inChapter 13.353020 Chrome with black rubber353021 Black with black rubber353022 Bronzed with black rubber353023 Chrome with grey rubber353024 Black with grey rubber353025 Bronzed with grey rubberTORNADO II BRAKE AND SHIFTERPEGSTornado II brake and shifter pegs aremachined from billet aluminum and thanchrome plated.They feature rubber wrappingwith protruding checkers,stars or crosses thatprovide extra comfort and a non-slip grip toyour boots. The end caps are Smooth orfeature the Four Cross or Lone Star design.Sold in sets with one 2 1/2" (6.4 cm) and 31/4" (8.3 cm) long peg, both are 1" (2.5 cm)in diameter.They are 5/16-18 UNC threadedand are easy to bolt on to most models andmost stock and aftermarket control kits.Matching handlebar grips can be found inChapter 14.Tornado II Brake and shifter pegsets351818 Chrome, Four Cross design351819 Black, Four Cross design351808 Chrome, Lone Star design351809 Black, Lone Star design351828 Chrome Smooth design351829 Black Smooth designMAGNUM PEGSMagnum pegs are machined from billetaluminum and than chrome plated or blackanodized. They feature rubber bands thatprovide extra comfort and a non-slip grip toyour boots. Driver foot pegs fit most malemount applications are 5 3/4" (14.5 cm) longand 1 3/16" (3 cm) in diameter. Foldingpassenger pegs have an over all length of 67/8" (17.5 cm) and are also 1 3/16" (3 cm)in diameter. These come with 1/2-13 UNCthreaded mounts. Matching brake and shifterpegs are 4" (10 cm) long and are 1" (2.5 cm)in diameter.They are 5/16-18 UNC threadedand are easy to bolt on to most models andmost stock and aftermarket control kits.Matching Magnum handlebar grip sets canbe found in Chapter 14. All Magnum pegsare sold in sets of 2.Magnum driver foot peg sets351922 Chrome351923 Black anodizedMagnum passenger foot peg sets351924 Chrome351925 Black anodizedMagnum brake & shifter peg sets351926 Chrome351927 Black anodized13-016

Shift & Foot Pegs/Peg SupportsTORNADO II SHIFTER PEGSTornado II brake and shifter pegs aremachined from billet aluminum and thenchrome plated or black anodized. Theyfeature rubber wrapping with protrudingcheckers that provide extra comfort and anon-slip grip to your boots. The end capsfeature the Lone Star design. Pegs are 2 1/2"(6.4 cm) long and are 1" (2.5 cm) in diameter.They are 5/16-18 UNC threaded and are easyto bolt on to most models and most stock andaftermarket control kits. Matching handlebargrips can be found in Chapter 14.KUSTOM TECH BILLETALUMINUM PASSENGER PEGSManufactured from aircraft quality billetaluminum and polished to a mirror shinehigh-gloss finish. These pegs are a perfectexample of Italian style and design. Thesefolding pegs have a rubber inlay that willprevent your feet from slipping of for yoursafety and convenience.The sleek design willperfectly match with Kustom Tech'scontoured forward controls and handlebarcontrols.741143 Polished751143 Black anodizedFOOT PEG EXTENSION KITRiders looking for increased riding comfortwill appreciate these foot peg extensions.They are installed easily, simply bolts in thefemale foot peg clevis in the OriginalEquipment shifter and brake control brackets.Machined from strong 3/8" thick, chromeplated steel plate. Will move your footpegsforward and lower. Includes chrome platedfoot peg clevis and necessary hardware. Fitsall FXWG and Softail models.362121 Foot peg extension kitTornado II shifter pegs351954 Chrome, Lone Star design351955 Black, Lone Star designHOLESHOT BRAKE AND SHIFTERPEGSHoleshot brake and shifter pegs are machinedfrom billet aluminum and then chrome platedor black anodized.They feature rubber bandsthat provide extra comfort and a non-slip gripto your boots.The end caps feature five speeddots. Pegs are 3" (7.5 cm) long and 1"(2.5 cm) in diameter. They are 5/16-24 UNFthreaded and are easy to bolt on to mostmodels and most stock and aftermarketcontrol kits. Great match with our Holeshotand Slasher floorboards. Sold in sets of 2.Holeshot brake & shifter peg sets057200 Chrome057201 Black with contrastingmachined accents057232 BronzedPERFORMANCE MACHINECONTOUR PASSENGER PEGSPM's Contour passenger pegs that match theContour forward controls. They come withfolding pivot and are highly polished.722176 Contour passenger pegs"COMFORT KIT" PASSENGERPEGSChrome plated reinforced 3/8" thick steelplates to relocate the passenger pegs on allHarley FXR models. These plates will locatethe pegs several inches higher and furtherforward for improved passenger comfort.Complete with chrome plated hardware.362100 Extended passenger pegsTRANSMISSION MOUNTPASSENGER BRACKETCustom passenger mount bracket for HarleyBig Twin rigid frames. Use with our 3/8" studmount foot pegs.361545 Transmission mount passengerbracketPASSENGER PEG MOUNTSReplacement chrome passenger peg mountsfor all 1983 to present Sportster models. Soldin pairs (OEM 50610-86T).361565 Passenger peg mounts13Foot Pegs, Floorboards & Forward Controls13-017

Peg SupportsCHROME PASSENGER PEGBRACKET COVER SET FOR DYNAGLIDEHide those unsightly rear brackets thatsupport the rear fender and passenger pegswith these chrome covers. They install inminutes right over the stock brackets, and fitall Dyna Glide models from 1991 to present.Kit contains a cover for the right sidepassenger peg and fender support, a coverfor the left-side rear fender support, and acover for the left-side passenger peg support.302060 Bracket cover setPASSENGER PEGS, BRACKETSAND SUPPORTS FOR HARLEY FXDirect replacement pegs, brackets andsupports for Harley FX models. Can also beused to replace the 1982 and later one piecestamped/welded rear footrest bracket as wellas for the large FL aluminum adjustable rearfootrest used on 1977 thru 1984 4 Speedmodels.361040 Foot peg set, chrome finish(OEM 50907-69A)361546 Chrome left and right mountingplate (1/4" thick)361548 Mounting set completeincludes plates, supports andmounting hardware, all chromefinishHI-WAY PEG SUPPORTS FORDYNAHi-Way peg supports are the answer for longhaul comfort. This support kit can be usedwith any of our male mount footpegs and isan easy bolt-on accessory for any 1995 topresent Dyna. Comes complete with allrequired hardware and has a chrome platedfinish. Matching male mount pegs can befound elsewhere in this chapter.361601 Fits 1995 to present FXD andFXDC models (OEM 49019-95)13Foot Pegs, Floorboards & Forward ControlsCHROME FOOT PEG CLEVIS SETThese universal clevis sets may be used tomount most Original Equipment or aftermarketfoot pegs with male shanks. Theycome complete with mounting hardware.Sold in pairs.346179 Chrome footpeg clevis setHL-WAY PEGS SUPPORT FORHARLEY FX-XLBeautifully chrome-plated Hi-Way pegsupports. Take OEM or Zodiac Hi-Way pegs.Includes all hardware needed, fits FX and XL.362051 Hi-Way peg supports for FX andXLADJUSTABLE HIGHWAY PEGSUPPORT KIT FOR SPORTSTEREasy to install highway peg support kit thatis adjustable in three different positions togive you exactly that relaxed sit you arelooking for. Everything you need to installthem is included, the only thing you have toorder separately are a pair of small malemount foot pegs. Fits all Sportster XL models2004 to present, except those with stock oraftermarket forward controls.056217 Adjustable highway pegsupport kit (OEM 49053-04)BULLET-STYLE FOOT PEGSUPPORTS233484 3/8"-24 Stud, zinc plated. FitsFL models from 1965 thru 1984and FX models from 1971 thru1985 (OEM 50973-65).233485 1/2"-20 Stud, zinc plated. FitsFL models from 1941 thru 1964and FX models from 1971 thru1972 (OEM 52683-74).PASSENGER PEG RELOCATIONBRACKETS FOR SOFTAIL MODELSThese chrome brackets install under the stockmounting screws that attach the fender strutsto the frame on Softail models. They aredesigned to relocate the OEM foot pegs to amore comfortable position for passengerswho like to lean back against the sissy-bar.Fits all Softail models from 1984 to present.Mount in minutes, sold in pairs.162274 Passenger peg relocationbrackets13-018

Peg Supports/Floorboards"ROLAND SANDS DESIGN"PASSENGER PEG RELOCATIONBRACKETSMachined to perfection out of billetaluminum. Re-locates the passenger pegs toa much higher position. Black powder coatedand complete with a set of chrome bolts. Fits1986 to present Softail. Sold in pairs.740741 Black powder coated passengerpeg relocation bracketsUNIVERSAL CRUISER PEGMOUNTS FOR 1 1/4" ENGINEGUARDSThese chrome plated billet aluminum clampsallow the installation of any of our malemount foot pegs on 1 1/4" diameter engineguards and frame tubes. Clamps comecomplete with mounting hardware. Sold inpairs.362123 1 1/4" Cruiser peg mounts(OEM 50957-02)PASSENGER PEG MOUNTBRACKET SETThis bracket kit mounts in the existing tappedholes in the frame below the seat. Fits allSoftail models from 1984 thru 1991. Notrecommended for Fat Boy or Heritage Softaildue to width of their seats. Also usable formany custom passenger pegs mountingapplications.361031 Bracket set onlyCHROME BILLET FOOT PEGMOUNTSThese universal billet aluminum foot pegmounts fit 1 1/4" (32 mm) diameter tubing,a common size for frame tubes and highwaybars.They take most of our male mount footpegs. Peg mounts are 360 degree adjustableand, because of the hidden interlockingmount system, can be secured thoroughly inany position. Peg mount brings your foot pegpivot point 3" (7.5 cm) from the tube. Theyhave a show chrome finish, come withchrome hardware and are sold in pairs.351197 Chrome billet foot peg mountsADJUSTABLE FOOTPEG MOUNTKITSDesigned to bolt to the passenger footpegmounting point.These kits include everythingnecessary to make the conversion. Theyfeature perfect chrome-plating on theindividual components. The pegs can berotated in a 360 degrees. Peg mounts areavailable for Softail models from 1984 topresent but also for FXR models 1982 thru1994.Note: Footpegs are not included.Passenger kits361569 Softails361570 FXRARLEN NESS DEEP-CUT BOARDS• Brand new cutting edge design from ArlenNess• Machined from two pieces of billetaluminum to create an all-new see-thrudesign• A great way to add exceptional style andcomfort to your bike• Available in chrome or black anodized finish• Designed to fit FLST/FLSTF/FLSTN models1986 to present,Road King models 1994to present and FLT/FLHT/FLHS models 1980to present.• Kits include all mounting hardware• Driver floorboards are 16" (41 cm) long, 53/4" *(15 cm) wide and 1" (2.5 cm) thick• Passenger boards are 7" (18 cm) long, 4"(10 cm) wide and 1" (2.5 cm) thick• Universal passenger floorboards boltstraight onto FLHX modelsA06838 Driver floorboards, chromeA06833 Driver floorboards, blackA06837 FLT passenger floorboards,chromeA06831 FLT passenger floorboards,blackA06839 Universal passengerfloorboards, chromeA06834 Universal passengerfloorboards, black13Foot Pegs, Floorboards & Forward Controls13-019

Floorboards13ARLEN NESS RETROFLOORBOARDS• Styled to match the Arlen Ness RETRO line• Constructed from chrome plated billetaluminum• Full length rubber inserts offer excellent gripand comfort• Driver floorboards fit FLST/FLSTF/FLSTNmodels 2000 to present and FLH & FLTmodels 2008 to present• Passenger floorboards fit FLH & FLT models1993 to present.• Driver floorboards are 16" (41 cm) long, 53/4" *(15 cm) wide and 3/4" (2 cm) thick• Passenger boards are 7" (18 cm) long, 4"(10 cm) wide and 3/4" (2 cm) thickA06842 RETRO driver floorboards,chromeNESS BATTISTINI FULL LENGTHBILLET FLOORBOARD KIT• Offers exceptional comfort with a greatappearance.• CNC machined from 6061-T6 and chromeplated.• Floorboard measure approximately 14"(36 cm) long and 5" (12 1/2 cm) wide.• Kits include floorboards, rubber pads,brackets and all necessary mountinghardware.• Kit fits 1980 to present FLT/FLHT/FLHSmodels, 1986 to present FLST, FLSTF andFLSTN models and 1994 to present RoadKing models.A06818 Full length billet floorboard kit,ChromeA06812 Replacement rubber kit(42 pcs.)Foot Pegs, Floorboards & Forward ControlsA06843 RETRO FLT passengerfloorboards, chromeNESS BATTISTINI PASSENGERFLOORBOARD KIT• Matching passenger floorboards for theNess full length rider floorboard kit• CNC machined from 6061-T6 aluminumand chrome plated• Fits 1980 to present FLT models.• Direct bolt-on using stock mountinghardwareA06819 Passenger floorboard kitChromeA06813 Replacement rubber kit(18 pcs.)BATTISTINI B2 SHORTBOARDSDRIVER FLOORBOARD• Replacement driver floorboards• Signature Battistini design• Features rubber pads to reduce vibration• Fits 1980 to present FLT & FLH Touringmodels• Available in black and chrome finish• Floorboards measure approximately 18"(46 cm) long and 5" (12.5 cm) wideA06975 BlackA06974 Chrome13-020

Floorboards/Forward ControlBATTISTINI SEMI-CIRCLE DRIVERFLOORBOARD• Replacement driver floorboards• Signature Battistini design• Features rubber pads to reduce vibration• Fits 1980 to present FLT & FLH Touringmodels• Available in black and chrome finish• Floorboards measure approximately 14"(36 cm) long and 5" (12.5 cm) wideA06972 BlackA06970 ChromeNESS FLOORBOARD SKINS• Designed to fit over the base of rectangularstyled floorboards from 1940-up• CNC machined from 6061-T6 billetaluminum• Chrome finish• Rubber inserts reduce vibration• Sold in pairsA06845 Ness Floorboard SkinsA06836 Replacement rubber kit (8 pcs.)NESS MINI FLOORBOARDS• Fit almost any front or rear factory foot pegapplication• Measure a petite 8" (20 cm) long x 3 1/2"(9 cm) wide• CNC machined from 6061-T6 billetaluminum• Equipped with a rotating male mount• Beautiful chrome finish• Kit includes boards,8 rubber cushion insertsand the necessary hardwareA06840 Mini floorboards, chromeA06832 Replacement rubber inserts (8pcs.)BATTISTINI SEMI-CIRCLEPASSENGER FLOORBOARD• Replacement passenger floorboards• Signature Battistini design• Features rubber pads to reduce vibration• Fits 1980 to present FLT & FLH Touringmodels• Available in black and chrome finishA06973 BlackA06971 ChromeNESS PASSENGER FLOORBOARDS 1989-UP TOURING• Designed for FLH and FLT Models 1989 topresent• CNC machined from 6061-T6 billetaluminum• Show quality chrome finish• Sold in pairsA06820 FLH & FLT PassengerFloorboardsA06821 Replacement rubber for skins (8pcs.)NESS 3" FORWARD CONTROL RE-LOCATORS FOR SOFTAIL•Moves factory foot controls 3" forward toincrease leg room•Includes black anodized billet aluminumadapter plates, extended stainless steel rearbrake line, extended shifter rod, kickstandspring pin and necessary hardwareA07610 Fits 2000 thru 2006 SoftailmodelsA07611 Fits 2007 to present Softailmodels, except ABS equippedmodelsA07616Fits 2011 to present ABSequipped Softail modelsA07612 Replacement brake line for2000 thru 2006A07613 Replacement brake line for2007 to present, except ABSequipped modelsA07617Replacement brake linefor 2011 to present ABSequipped Softail models13Foot Pegs, Floorboards & Forward Controls13-021

Floorboards/Peg Supports/FloorboardsCHROME PASSENGER FOOT PEGSUPPORTSPerfect copies from the Original Equipmentpassenger foot peg supports as found on2000 to present Softail models.The included3/8-16 UNC socket head screws slip into thesupports and are used to bolt them to theframe. Chrome pivot bolts and nylock nutsare also included. Fits stock and mostaftermarket frames. These supports take allstock and aftermarket small male mount footpegs and are sold in pairs.346174 Chrome bolt-thru passengerfoot peg support kit(OEM 50942-00)LATE MODEL RECTANGULAR"SHAKER" FLOORBOARDS.These rectangular "Shaker" floorboards arestock replacement items for crash-damagedor used motorcycles. They fit all 5 Speed FLT,FLHT, FLHS Heritage Softail and Fat Boymodels from 1980 to present. Sold in sets(OEM 50621-79).057040 Shaker Floorboards13Foot Pegs, Floorboards & Forward ControlsNESS 2" FLOORBOARD RE-LOCATORS FOR TOURINGMODELS• Kit moves factory floorboards forward by2" (5 cm)• Provides extra leg room and comfort fortaller riders• Steel relocation brackets utilize factorymounting hardware• Designed to work on all 1983 thru 2008 or2008 to present Touring models• Available in either black powder coat orchromeA07607 Fits 1983 thru 2008 FLH andFLT models, chromeA07606 Fits 1983 thru 2008 FLH andFLT models, blackA07608 Fits 2008 to present FLH andFLT models, chromeA07609 Fits 2008 to present FLH andFLT models, blackADJUSTABLE "SHAKER" MOONFLOORBOARDSAn innovative design which provides aversatility lacking in other floorboards. Theforged and chrome-plated mounting bracketspermit a full seven inch fore-aft adjustmentalong with angle and height adjustability.Theuse of rubber bumpers ensures a comfortableride and no vibrations to your feet. Fits all 4Speed FXWG models from 1980 thru 1986,all Softail models 1984 to present (exceptHeritage and Fat Boy) and all Dyna Wide Glidemodels 1990 to present. However, they canbe installed on any late-model motorcyclewith clevis-style footpeg mounts.057020 Adjustable Shaker floor- boards(set)FLOORBOARDS FOR FLSTSOFTAIL MODELSPerfect reproduction of the floorboards asused on all 2006 to present FLST seriesmodels, including Fat Boy, Heritage, CrossBones and Springer.Have a chrome finish andcome with the rubber pads installed. Sold inpairs.057190 Pair chrome floorboards withrubber pads (OEM 50621-06)MOON FLOORBOARDS FOR BIGTWINSBeautifully chrome plated floorboard set, aperfect copy of the early original floorboards.Stock replacement for Big Twins 1941 thru1965, but will also fit the original brackets onall 4 Speed Big Twin models 1940 thru 1984.361502 Floorboard set(OEM 50603-40)358021 Replacement rubbers, set of 2(OEM 50640-40)13-022

FloorboardsMOON FLOORBOARDS WITHUSA LOGOBeautifully chrome plated floorboard set, aperfect copy of the Harley-Davidsonfloorboards.Fits all Big Twins 1941 thru 1984.Features USA logo in rubber pad(OEM 50603-40).361566 Moon floorboard set with USAletter"SHAKER" MOONFLOORBOARDSRubber mounted "Shaker" floorboards toreplace the early solid mount vibrators. Superchrome really makes your bike outstanding.361558 Floorboards Oval shaker setLATE MODEL "SHAKER" MOONFLOORBOARDSClassic style floorboard set which fits all 5Speed FLT,FLHT,FLHS Heritage Softail and FatBoy models from 1980 to present.Dependingon which way they're installed, you'll end upwith your feet 1" (25 mm) further ahead orfurther behind the stock position.This makesit possible to tailor your foot placement forincreased comfort (OEM 50599-89T).057041 Oval shaker floor board set"THE FACTORY" CAST BRASSMOON STYLE FLOORBOARDINSERTSTraditionally hand cast by "The Factory" thesesolid brass floorboard inserts are a greatlooking replacement for the stock rubberinserts on 1941 thru 1965 Big Twins, as wellas most aftermarket Moon style floorboards.Rubber mounted for comfort and great classiclooks,certainly in combination with other castbrass accessories from "The Factory" foundelsewhere in this catalog. Available with orwithout cast-in "The Factory" logo.735454 "The Factory" cast brass Moonstyle floorboard inserts, plain735455 "The Factory" cast brass Moonstyle floorboard inserts withlogo"THE FACTORY" CAST BRASSFLOORBOARD INSERTSHand cast by "The Factory" these solid brassfloorboard inserts are a great lookingreplacement for the stock rubber inserts onmost 1980 to present Touring and FLST Softailmodels. Floorboards are rubber mounted forcomfort and give your bike a great classiclook. Certainly in combination with othertraditionally cast accessories from "TheFactory" found elsewhere in this catalog.Inserts are, like almost any part from "TheFactory", attractively packed in an exclusivewooden box.Available with or without castin"The Factory" logo.735460 "The Factory" cast brassfloorboard inserts, plain735461 "The Factory" cast brassfloorboard inserts with logo13Foot Pegs, Floorboards & Forward Controls13-023

Floorboards/Brake Pedals & Backing PlatesPASSENGER FLOORBOARDS FORFL & FLH MODELSChrome plated passenger floorboards. Offermore comfort for the passenger.Easy to install(set of 2).361507 Passenger floorboards361542 Replacement floorboardrubbers13Foot Pegs, Floorboards & Forward ControlsHOLESHOT BILLET ALUMINUMFLOORBOARDSThese billet aluminum floorboards add a greatcustom look to your bike. They are easy toinstall as they feature custom designedmounting brackets, ready to bolt on the stockfloorboard mountings.The energy absorbingZi-Cone rubber pads provide extra grip andcomfort under any riding condition. Thesefloorboards fit al 1984 to present FLH andFLT Touring models and all 1986 to presentFLST models. Sold in pairs. Matching brakepedals,shifter pegs and passenger boards arealso available. Replacement rubbers are alsoavailable and are sold in sets of 16.057194 Chrome driverfloorboards, pair057203 Chrome passengerfloorboards, pair057236 Chrome brake pedal pad057200 Chrome shifter peg set057195 Black driver floorboardswith contrasting machinedaccents, pair057204 Black passengerfloorboards with contrastingmachined accents, pair057237 Black brake pedal pad057201 Black shifter peg set057234 Bronzed driverfloorboards, pair057235 Bronzed passengerfloorboards, pair057238 Bronzed brake pedal pad057232 Bronzed shifter peg set057196 Set of 16 replacementrubbersSLASHER BILLET ALUMINUMFLOORBOARDSThese billet aluminum floorboards add a greatcustom look to your bike. They are easy toinstall as they feature custom designedmounting brackets, ready to bolt on the stockfloorboard mountings.The energy absorbingZi-Cone rubber pads provide extra grip andcomfort under any riding condition. Thesefloorboards fit al 1984 to present FLH andFLT Touring models and all 1986 to presentFLST models. Sold in pairs. Matching brakepedals,shifter pegs and passenger boards arealso available. Replacement rubbers are soldin sets of 16.057208 Chrome driverfloorboards, pair057210 Chrome Slasherpassengerfloorboardkit057236 Chrome brake pedal pad057200 Chrome shifter peg set057209 Black driver floorboards, pair057211 Black Slasherpassengerfloorboardkit057237 Black brake pedal pad057201 Black shifter peg set057230 Bronzed driverfloorboards, pair057231 Bronzed passengerfloorboards, pair057238 Bronzed brake pedal pad057232 Bronzed shifter peg set057196 Set of 16 replacementrubbersADJUSTABLE FLOORBOARD KITSThe latest design of adjustable floorboardsprovides the rider with a versatility lacking inother floorboards.The kit permits a full seveninch of forward-aft adjustment along withangle and height adjustability. The chromeplated and forged mounting brackets ensurestrength and durability. Available with ourpopular floorboards as well as our latest styleShaker floorboards.Both models are designedto fit all 4 Speed FXWG models from 1980thru 1986 and all Softail models or Dyna WideGlide models 1984 to present (exceptHeritage and Fat Boy). The floorboards canalso be used as passenger floorboards onSoftail models or on any late modelmotorcycle with clevis-style foot peg mounts.057068 Adjustable "Shaker" floorboardkit057069 Adjustable floorboard kit13-024

FloorboardsFLOORBOARDS FOR BIG TWINFeature anti-vibration rubber bumpers for asmooth ride. Chrome plated finish. Rubbersand bumpers are separately available.Fits thestock mounting brackets on all 4 Speed BigTwin models 1940 thru 1984. If stockbrackets have been removed, replacementbracket kits are available.057010 Floorboard set(OEM 50603-74A)361524 Floorboard rubber(OEM 50614-66) (Sold each)057011 Bumper rubbers(OEM 50620-74) (set of 8)CYCLE KRAFT FLOOR BOARDSCycle Kraft floor boards are CNC machinedfrom billet aluminum by Ken's Factory.Available in a polished finish or blackanodized with clear cuts. Simple bolt-oninstallation on the factory mounts.Fits FLST Softail models and FLHand FLT series Touring models1986 to present747260 Polished747259 Black anodized finish with clearcuts13SWEPT STREAMLINER RIDERFLOORBOARDSThe Swept Streamliner floorboards are styledafter the sleek sweeping floorboard designfound on the FLHRC Road King Custom.Theseboards feature rubber pads to isolatevibration and three chrome bands to enhancetheir appearance.Very easy to install in placeof the stock floorboards found on all 1980 topresent FLH and FLT series Touring modelsand 1986 to present FLST Softail models.Soldin pairs in your choice of black or chrome.057197 Chrome057198 BlackTOUR-EASE PASSENGERFLOORBOARD SETThese floorboards provide excellent comfortfor the passenger and feature a universalmounting system that promotes easyinstallation. Some modifications may berequired for installation.057005 Tour-Ease passengerfloorboardsHOLESHOT BILLET ALUMINUMPASSENGER FLOORBOARDSThese billet aluminum floorboards add a greatcustom look to your bike. They are easy toinstall as they feature folding 4 1/2"(11.4 cm) long 1/2" UNC threaded standoffs.The energy absorbing Zi-Cone rubberpads provide extra grip and comfort underany riding condition. Matching driverfloorboards to fit al 1984 to present FLH andFLT Touring models and all 1986 to presentFLST Softail models are also available.Replacement rubbers are sold in sets of 16.057203 Chrome passenger floorboards,pair057194 Chrome driver floorboards, pair057204 Black passenger floorboardswith contrasting machinedaccents, pair057195 Black driver floorboards withcontrasting machined accents,pair057235 Bronzed passenger floorboards,pair057234 Bronzed driver floorboards, pair057196 Set of 16 replacement rubbersFoot Pegs, Floorboards & Forward Controls13-025

Floorboards/Forward Control/Brake Pedals & Backing Plates13Foot Pegs, Floorboards & Forward Controls13-026SLASHER BILLET ALUMINUMPASSENGER FLOORBOARDSThese billet aluminum floorboards add a greatcustom look to your bike. They are easy toinstall as they feature folding 4 1/2"(11.4 cm) long 1/2" UNC threaded standoffs.The energy absorbing Zi-Cone rubberpads provide extra grip and comfort underany riding condition. Matching driverfloorboards to fit al 1984 to present FLH andFLT Touring models and all 1986 to presentFLST models are also available. Replacementrubbers are sold in sets of 16.057210 Chrome Slasherpassengerfloorboardkit057208 Chrome driver floorboards, pair057211 Black Slasherpassengerfloorboardkit057209 Black FL Slasher floorboard057231 Bronzed passenger floorboards,pair057230 Bronzed driver floorboards, pair057196 Set of 16 replacement rubbersBRACKET KIT FOR ORIGINALSTYLE FLOORBOARDSComplete floorboard mounting bracket sets.Available for early steel primary and latermodels with aluminum primary. Fits Oval,Oval Shaker and Late Style floorboards.057032 Mounting bracket set foraluminum primary models057034 Mounting bracket set for steelprimary modelsWELD-ON TAB FOR FORWARDCONTROLWelds to the right hand side of the frame ofthe late 4 Speed Big Twin frames without themounting tab as original equipment. Perfectfor mounting Hi-Way pegs or forwardcontrols.233527 Weld on tab forward controlJOCKEY SHIFT CONVERSION FORHARLEY BIG TWINConverts the hand clutch and foot shift tohand shift and foot operated clutch. Fits BigTwin models thru early 1979 with 4 Speedgearbox. Has super looking chrome finish.Takes standard or custom ball (not included).056010 Conversion kit292084 Jockey shift lever onlyARLEN NESS BRAKE PEDALS FORTOURING MODELS• The ultimate in brake arms from Arlen Ness• Perfect match for Ness heel/toe shifter kits• Carved from billet aluminum and chromeplated or black anodized• Choose from Deep Cut, Retro or Radiusstyling• Radius brake arm does not include a brakepeg, this must be ordered separately• Available for both 1997 thru 2007 and2008 to present Touring modelsBrake arms1997 2008thru 2007 to presentA19773 A19774 Deep Cut, chromeA19768 A19778 Deep Cut, blackA19776 A19777 RetroA19772 A19775 Radius (brake pegsold separately)NESS-TECH BRAKE PEDALS FORTOURING MODELS• Better comfort, better style• Radius design radically improves styling• Each pedal is machined from 6061-T6 billetaluminum and then beautifully chromeplatedA19770 Fits 1997 thru 2007 FLH andFLT modelsA19771 Fits 2008 to present FLH andFLT models

Brake Pedals & Backing PlatesBATTISTINI BRAKE PEDALS FORTOURING & SOFTAIL MODELS• Compliments Battistini shift lever• Available in chrome or black anodized• Simple and easy to installHYDRAULIC BRAKE PEDALBACKING PLATEFits all Big Twins 1959 thru 1969. Chromefinish (OEM 42480-59).291231 Brake pedal backing plateARLEN NESS FOOT CONTROLKITS FOR TOURING MODELS• The ultimate foot control kits from ArlenNess• Each design is carved from billet aluminum• Available individually or as a complete brakeand shifter set• Choose from Battistini, Deep Cut, Retro orRadius styling• Radius brake and heel/toe shifter kits donot include brake/shifter pegs, these mustbe ordered separately• Available for both 1997 thru 2007 and2008 to present Touring modelsHeel/Toe Shifter kits for 1997 topresent Touring modelsA19458 Battistini, chromeA19459 Battistini, blackA19791 Deep Cut, chromeA19792 Deep Cut, blackA19793 RetroA19790 Radius (order brake andshifter pegs separately)Brake & Heel/Toe Shifter kits1997 2008thru 2007 to presentA19797 A19794 Deep Cut,chromeA19798 A19795 Deep Cut,blackA19799 A19796 RetroChromeA07550A07552A07556A07554A07556A07558BlackA07551 2000-2007 FLH &FLTA07553 2008 to presentFLH and FLTA07557 1986-1999 FLSTSoftailA07555 2000 to presentFLST SoftailA07561 1984-1999 FXSTSoftaillA07559 2000 to presentFXST SoftailMECHANICAL BRAKE PEDALBACKING PLATEFits all Big Twins 1936 thru 1957(OEM 42480-36). Chrome finish.291238 Mechanical Brake Pedalbacking plateMECHANICAL BRAKE PEDALFits all Big Twins 1936 thru 1957(OEM 42402-36). Chrome finish.291237 Brake pedalHYDRAULIC BRAKE PEDALFits all Big Twins 1959 thru 1969. Chromefinish (OEM 42402-59).291230 Brake pedalHYDRAULIC BRAKE BACKINGPLATEFits all FL models 1970 thru early 1979.Chrome finish (OEM 42480-73).291248 Brake pedal backing plateHYDRAULIC BRAKE PEDALFits all FL models 1970 thru early 1979.Chrome finish (OEM 42404-73A).292033 Brake pedal Hydraulic13Foot Pegs, Floorboards & Forward Controls13-027

Brake Pedals & Backing PlatesCHROME REAR BRAKE PEDALA perfect replica of the OEM rear brake pedal.Beautifully and flawlessly chrome plated. FitsFLSTC and FLSTF models late 1987 to presentand FLSTN models 1993 to present(OEM 42407-87B).291236 Brake pedalARLEN NESS DEEP CUT BRAKEPEDALS•Deep Cut brake pedals combine uniquedesign with excellent function•Perfect match for the Deep Cut Heel/Toeshifter kits or single shift kits•Machined from 6061-T6 aluminum andthen either chrome plated or black anodizedand machine cutCHROME BRAKE PEDALThis chrome plated rear brake pedal is a"stronger than stock" aluminum forging,andthe perfect finishing touch for FXR modelswith the black and chrome enginepackage.Fits all FXR models from 1982 thru1994 (OEM 42523-82 & 42523-87).362109 Chrome brake pedalFits 2000 to present FLST SoftailmodelsA19750 ChromeA19751 Black13REAR BRAKE PEDALChrome plated replacement rear brake pedal.Fits all FX models 1972 thru 1985 (not forFXWG) (OEM 42399-72A).292035 Rear Brake pedalFits 2000 to present FXST SoftailmodelsA19752 ChromeA19753 BlackHYDRAULIC BRAKE LEVER STOPChrome plated brake lever stop, fits all FLmodels 1970 thru 1979,FX models 1971 thru1972 (OEM 42411-70T).291250 Brake lever stopFoot Pegs, Floorboards & Forward ControlsFLOORBOARD ADAPTORThis floorboard adapter must be used toretain the factory floorboard, when a customexhaust system is installed, to clear the frontpipe. Used on all FLH nosecone models 1970thru 1984 kick- and -electric start.062041 Floorboard adaptorFits 2006 to present FXDWG DynaWide Glide and 2008 to presentFXDF Fat Bob, as well as all 2006 topresent Dyna models with ZPN056269 forward controls installedA19754 ChromeA19755 BlackFits 1997 thru 2007 FLH and FLTseries Touring modelsA19773 ChromeA19768 BlackDIAMOND STYLE BRAKE PEDALPADBeautifully chrome plated brake pedal padwith diamond shaped rubber inserts for suregrip.Bolts on to the Original Equipment brakepedal in place of the stock rubber pad. FitsFXWG, Softail and Dyna Wide Glide modelsfrom 1983 to present.358068 Diamond style brake pedal padFits 2008 to present FLH and FLTseries Touring modelsA19774 ChromeA19778 Black13-028

Brake Pedals & Backing PlatesCHROME REAR BRAKE PIVOTCOVERThese chrome plated stamped and beveledcovers were designed to cover the pivot pointon the brake lever and are held in place by anew socket head screw. They install in justabout two minutes. Fits FXWG and Softailmodels (except Heritage and Fat Boy) from1983 to present.301817 Rear brake pivot coverSTREAMLINER BRAKE PEDAL PADAnother addition to our extensive line ofStreamliner style products. Die-cast brakepedal pads with a chrome plated finish, withrubber inserts in the popular Streamlinerdesign. Replaces the black rubber pad on allFXWG, Dyna Wide Glide and FXST modelsfrom 1983 to present.358066 Streamliner brake pedal padBILLET ALUMINUM BRAKE PEDALPADS FOR TOURING MODELSThese billet aluminum brake pedal pads adda great custom look to your bike. They alsomatch perfectly with our "Slasher" and"Holeshot" floorboards.Available in chromeplated, black anodized with clear cuts orbronze anodized. Fit all 1984 to present FLHand FLT Touring models and all 1986 topresent FLST Softail models.057236 Chrome057237 Black057238 BronzeCYCLE KRAFT BRAKE PEDALPADSCycle Kraft brake pedal pads are CNCmachined from billet aluminum by Ken'sFactory. Available in polished finish or blackanodized with clear cuts. Simple bolt-oninstallation.Fits FXST Softail models 1984 topresent, except FXSTD "Deuce"747261 Polished747262 Black anodized finish with clearcutsFits FLH and FLT series Touringmodels 1986 to present747263 Polished747264 Black anodized finish with clearcutsSTREAMLINER BRAKE PEDALPADSStyled after the stock brake pedal pad on theRoad King Custom. The beefy rubber padfeatures three protruding accents and issurrounded by the frame.Available in chromeor black and comes complete with an acornstyle nut. Bolts on in seconds on all FLH andFLT series Touring models 1980 to presentand all 1986 to present FLST Softail models(OEM 42712-04).351492 Chrome Streamliner brakepedal pad351493 Black Streamliner brake pedalpadPRO-ONE BILLET BRAKE PEDALCOVERPro-One's two-piece design features a billettop pad with ball milled lines combined witha lower plate to enclose your stock brakepedal for a custom look. Fits FLT, FLHTHeritage Softail and Fat Boy 1987 to present.237841 Brake pedal cover chrome13Foot Pegs, Floorboards & Forward Controls13-029

Forward Control13Foot Pegs, Floorboards & Forward ControlsFORWARD CONTROL KIT FOR 2004 TO PRESENTSPORTSTERThese beautifully finished forward controls are available as a stockreplacement as well as in a 2" (5 cm) extended kit. Both shift and brakelevers are aluminum forgings that have flawless chrome finish.Extendedkits mount on the same tabs as the stock replacement controls. Kitsinclude ISO style pegs for more comfort to your feet.Kits include chromeplated mounting hardware.Chrome forward control for Sportster 2004 to present056135 Chrome forward control (OEM 33395-04)056137 2" extended Chrome forward control237841 Brake pedal cover chromeNESS-RETRO ROCKET FORWARD CONTROLS• Retro styled forward controls designed to match the Arlen Ness Retrohand controls• Made for 1984 thru 1999 FXST & 4-Speed Big Twin models or2000-Up Softail models• Available in either show quality chrome or rich black anodizing• Black anodized models feature machine cuts for a great contrastinglook• See elsewhere in this Chapter for matching Ness Retro hand controlsNote: Foot pegs and shifter pegs are not included but sold separatelyForward control fits 1984 thru 1999 FXST and 4-speedBig-TwinA07602 ChromeA07603 BlackForward Controls fits 2000-up Softail (Includes customkickstand mount and requires the kickstand kit for2007 to present models)A07604 ChromeA07605 BlackA07624 Custom kickstand kit for use on 2007 to present modelsReplacement partsA19910 Radius shifter rod, stock lengthA07641 Master Cylinder Rebuild Kit, 3/4" boreA07601 Shift/brake peg extensionA07600 Foot peg mountNOTE: WHEN INSTALLING EXTENDED FORWARDCONTROLS ON A MOTORCYCLE, MAKE SURE ALLECLEARANCES ARE CHECKED13-030

Forward ControlNESS RADIUS FORWARD CONTROLS• Curvaceous design for a show winning look• All master cylinder linkage is hidden• Shift controls feature teflon bushings for smooth operation• Available in stock length and 3" (7.5 cm) Extended versions• Custom shifter rod included• CNC machined from 6061-T6 billet aluminum• Show quality chrome finish• Accepts any of our male mount style foot pegs or our mini floorboardsand brake/shifter pegs• Kits include a custom kickstand mountNote: For use on 2007 to present models a ZPN A07624 kickstandmust be ordered separatelyNote: Kits do not include foot pegs, brake,- or shifter peg. Order a setof male mount foot pegs and two brake/shifter pegs of your choice tocomplete these controlsRadius forward controls for 2000 to present SoftailmodelsA07621 Stock lengthA07623 3" ExtendedRadius forward controls for 4 Speed Big Twin, 1984thru 1999 Softail and most Softail style custom framesA07620 Stock lengthA07622 3" ExtendedOptionalA07624 Custom kickstand kit for use on 2007 to present modelsReplacement partsA19910 Radius shifter rod, stock lengthA07642 Master Cylinder completeA07641 Master Cylinder Rebuild Kit, 3/4" boreA07629 Master cylinder top cover gasketA07646 Chrome endcap cover, brake or shifter sideA07601 Shift/brake peg extensionA07600 Foot peg mountBATTISTINI FORWARD CONTROLS• Sleek design uses the lever pivot for the foot peg mount• Available in stock length and 2" (5 cm) extended• Your choice of show quality chrome or rich black anodized finish• Complete with Battistini foot pegs, brake peg and shifter peg• Must be used with a pre-2000 kickstand bracket and a 2" extendedshifter rodFits 2000 to present modelsA07516 Black, stock lengthA07517 Black, 2" extendedA07514 Chrome, stock lengthA07515 Chrome, 2" extendedFits 4 Speed Big Twin, 1984 thru 1999 Softail and mostSoftail style custom framesA07512 Black, stock lengthA07513 Black, 2" extendedA07510 Chrome, stock lengthA07511 Chrome, 2" extendedFORWARD CONTROL KIT FOR EARLY SPORTSTERSAn easy-to-install kit for moving the controls to a more comfortableposition near the front frame down-tubes. All major components arechrome plated and comes complete with mounting hardware. Workswith all our 5/8" female mount footpegs and studded or threadedbrake,- and shifter pegs.Available for 1957 thru 1974 models with therare right side shifting as well as for 1977 thru 1978 models with thenormal left side shifting.056148 Fits 1957 thru 1974 models056149 Fits 1977 thru 1978 models13Foot Pegs, Floorboards & Forward Controls13-031

Forward Control13Foot Pegs, Floorboards & Forward ControlsFORWARD CONTROL KIT FOR SPORTSTER MODELSA forward control kit provides a low cruiser look to your motorcycle,with the comfort of extended reach for the long haul.This kit is a chromeversion of the stock forward controls as found on 1999 to present XL883C and XL 1200C models. Kit is very attractively priced, as there areno foot pegs included.These can re-use the stock foot pegs, as well asthe shifter peg from your bike. If you prefer a set of new better styledcustom pegs, these can found elsewhere in this catalog. Fits 1986 thru1990 4 Speed, and 1991 thru 2003 5 Speed Sportster models, except883R.Also available in a 2" extended version for more comfort.056129 Control relocation kit (OEM 33891-98)056212 2" Extended control relocation kitNote: Does not work with Screamin Eagle, Vance and Hines, orSupertrapp 2-into-1 exhaust systemsNOTE: WHEN INSTALLING EXTENDED FORWARDCONTROLS ON A MOTORCYCLE, MAKE SURE ALLECLEARANCES ARE CHECKEDFORWARD CONTROL SETSComfort, style and a custom appearance are combined in theseAmerican engineered forward control sets. Available from Zodiac forthe latest Harley models. Sets are available for all 5 Speed FXR modelsHarley-Davidson, Shovelhead or Evolution powered 1982 thru 1994and for the 1986 to present Evolution powered 883-1100-1200Sportster.These controls are easy to install without removing the primarycovers.All parts are show-chromed and complete with Zodiac's O-ringfoot pegs.This is the way to go for easy Hi-Way cruising and a superbCustom look.056025 Evolution Sportster 1986 thru 1990056080 Evolution Sportster 1991 to present with 5 Speedtransmission056083 FXR 1982 thru 1994Replacement brake pedals056079 Fits Sportster sets056078 Fits FXR setsFORWARD CONTROL KIT FOR DYNA GLIDE MODELSChrome plated forward control kit for all Dyna Glide models from1991-2005. Stock replacement for the Original Equipment parts asfitted on Dyna Wide Glide models from 1993-2005,but can also be usedon 1991-2005 Dyna Low Rider models when eliminating the midmountcontrols.This kit is easy to install and will fit perfectly.056095 Forward controls for Dyna056097 Shift lever only (OEM 34564-90A)13-032

Forward ControlEXTENDED FORWARD CONTROL KITFor the long-legged riders who want to convert their mid-mount controlsto a more comfortable and extended forward position, we offer a verycomplete extended control kit to fit all Dyna Glide models 1991-2005.This beautifully chrome plated kit locates the foot peg and controlsposition aprox. 2" (5 cm) further forward than the OEM footpegs. Fitsall 1991-2005 Dyna Glide models. It includes all necessary partsincluding an extended and reinforced brake rod.056096 Extended forward control kit for Dyna models056097 Shift lever only (OEM 34564-90A)FORWARD CONTROL KIT FOR DYNA GLIDE MODELSChrome plated forward control kit that fits all Dyna Glide models from2006 to present. Stock replacement for the Original Equipment partsas fitted on 2006 to present Dyna Wide Glide and FXDF, but can alsobe used on all other 2006 to present Dyna models when eliminatingthe mid-mount controls. A perfectly fitting and very easy to install kitthat comes complete with all required hardware. Tall riders may alsoconsider the purchase of a separately available extension kit that willrelocate the foot pegs and controls some 2" (5 cm) further forward,056269 Forward control kit for 2006 to present Dyna(OEM 49080-06)056270 Fits 2006 to present Dyna models, with ZPN 056269 orsimilar forward controlsFORWARD CONTROL EXTENSION KIT FOR DYNA'SThis extension kit locates the foot pegs and controls approx. 2" (5 cm)further forward than stock, providing relief for tall Dyna riders. Kitcontains two relocation plates with hardware and an extended brakeand shifter rod.All parts have a beautiful show-chromed finish.056099 Fits 1993 thru 2002 Dyna Wide Glide models, and anyother Dyna with ZPN 056095 or similar forward controls.056270 Fits 2006 to present Dyna models, with ZPN 056269 orsimilar forward controls13Foot Pegs, Floorboards & Forward ControlsNOTE: WHEN INSTALLING EXTENDED FORWARDCONTROLS ON A MOTORCYCLE, MAKE SURE ALLECLEARANCES ARE CHECKED13-033

Forward Control13Foot Pegs, Floorboards & Forward ControlsFORWARD CONTROL RE-LOCATION KITThis beautifully chrome plated kit re-locates the forward control 3"further forward providing longlegged riders a more comfortable ridingposition. Stock foot pegs and brake lever must be re-used. Installationcan be done in less than one hour. Comes complete with all necessaryhardware and detailed instructions. Fits 1987 thru 1999 Softail modelsand may be installed on 1986 thru 1999 Softail models if the oil filteris re-located.056032 Forward control re-location kit3" EXTENSION KIT FOR 2000 THRU 2006 SOFTAILMODELS FORWARD CONTROLSProvide more comfort and concerning clearance for taller riders, thisextension kit relocates the footpegs 3" further forward. Fits all 2000thru 2006 Softail models with forward controls.Kit contains 2 relocationplates, extended shifter rod and chrome plated screws. Extended rearbrake line is not included but must be ordered separately.056263 Chrome056264 Polished056265 BlackFLOORBOARD RE-LOCATOR KITS FOR SOFTAILMove the OEM floorboards 2" forward for more leg room. Kit usesstock floorboards, brake lever, shift lever and shift arm. Kits includealuminum adapter plates in your choice of chrome, polished or black,stainless steel extended shifter rod and mounting bolts.1986 thru 1999Softails also include a chrome plated brake master cylinder cover.Extended rear brake line is not included and must be ordered separately.Available for 1986 thru 1999 and 2000 to present floorboard equippedSoftail models.Fits 1986 thru 1999 Softail056257 With chrome adapter plates056258 With polished adapter plates056259 With black adapter platesFits 2000 to present Softail056260 With chrome adapter plates056261 With polished adapter plates056262 With black adapter platesFOOT CONTROL SPACERS FOR SOFTAILS WITH WIDEWHEEL CONVERSIONThese spacers are designed for Twin Cam Softail models that have awide wheel conversion installed, such as our Wide Ass and Super Assswing arm kits. Moves the shifter side of your floorboards or forwardcontrols 25 mm (almost 1") outwards to give room for your offsetprimary. Has a black finish and comes with hardware.396000 Foot control spacer for Twin Cam SoftailNOTE: WHEN INSTALLING EXTENDED FORWARDCONTROLS ON A MOTORCYCLE, MAKE SURE ALLECLEARANCES ARE CHECKED13-034

Forward ControlCHROME FORWARD CONTROL KITS WITH MASTERCYLINDER FOR BIG TWINSThis is the most complete and affordable kit. It includes a 3/4" boreKelsey-Hayes type master cylinder with extended brake line and allmounting hardware. The brake pedal and shift lever ride on bronzebushings giving smoother pedal action. For the guys with long legs weoffer a 2" (5 cm) extended kit. Both are available as a complete kitwith O-ring type foot pegs and shifter peg or as a kit without foot pegs.The kits without pegs allow you to pick the pegs of your choice justbecause you like those better or to get a matching set with yourpassenger pegs. The foot peg supports have female clevis' that willaccept most male type foot pegs shift lever accept any style shift peg.Fits all 4 Speed FX and FL models from 1958 thru 1986 and all 5 SpeedSoftail models from 1986 thru 1999.Note: On some 1980 to 1984 FXE models the right side mounting tabis not installed.These models require the welding on of our mountingtab ZPN 233527.Complete forward control set, includes O-ring typefoot pegs and shifter peg056100 Forward control set056108 2" Extended forward control setForward control set without foot pegs and shifter peg056109 Forward control set056110 2" Extended forward control setCHROME BILLET FORWARD CONTROL SETS FORTWIN CAM SOFTAIL MODELSThese very complete forward control sets are CNC machined fromaircraft quality billet aluminum and feature a show chrome finish. Kitsinclude a billet aluminum 3/4" bore rear brake master cylinder, rubberband style foot pegs, and shifter peg.The brake pedal and shift leversride on bronze bushings for smoother and anti-wear pedal operation.Come complete with all required hardware for easy installation on allTwin Cam Softail models 2000 thru 2006.056133 Chrome billet forward control kit13Foot Pegs, Floorboards & Forward ControlsNOTE: WHEN INSTALLING EXTENDED FORWARDCONTROLS ON A MOTORCYCLE, MAKE SURE ALLECLEARANCES ARE CHECKED13-035

Forward Control13Foot Pegs, Floorboards & Forward ControlsBILLET FORWARD CONTROL FOR SOFTAIL MODELSThese forward controls are another great looking product from KustomTech.The sleek design of the master cylinder will perfectly match withKustom Tech's contoured handlebar controls. The shift and brake pegas well as the footpegs have a rubber inlay that will prevent your feetfrom slipping of. Pegs will fold for your safety and convenience. Madefrom billet aluminum and then polished to a mirror shine high glossfinish or satin black anodized. Controls will fit all Softail models from1986 thru present. Set includes a banjo fitting and a shifter rod.Theseforward controls require a separate kickstand like ZPN 741128.Fits Softail models 1986 thru 1999741142 Polished751142 Black anodizedFits Softail models 2000 to present741144 Polished with slotted arms751144 Black anodized with slotted arms751286 Black anodized with round hole armsMaster cylinder rebuild kits751147 For 14 mm bore751148 For 16 mm boreKUSTOM TECH BILLET ALUMINUM PASSENGER PEGSManufactured from aircraft quality billet aluminum and polished to amirror shine high-gloss finish. These pegs are a perfect example ofItalian style and design. These folding pegs have a rubber inlay thatwill prevent your feet from slipping of for your safety and convenience.The sleek design will perfectly match with Kustom Tech's contouredforward controls and handlebar controls.741143 Polished751143 Black anodized13-036

Forward ControlCHROME BILLET FORWARDCONTROL KIT FOR SOFTAILThe smooth flowing lines of these forwardcontrols match perfectly with the Softail.Mounting plates, levers and brake mastercylinder in this kit are all CNC machined fromsolid billet aluminum, high luster polishedand then chrome finished. All requiredhardware for the installation is included, butyou will have to order a brake peg, shifter pegand a set of male mount foot pegs separately.This gives you a wide variety of styles tochoose from.This kit fits all FX Softail models2000 thru 2006.Installation on FXSTD Deucemodels requires the use of ZPN 055011spacer kit.055109 Forward control kit for 2000thru 2006 FX Softail(OEM 33907-01)055011 Optional spacer kit for FXSTDDeuce (OEM 42802-03)"GLADIATOR" BILLET ALUMINUMFORWARD CONTROL KITS FORFX, FL AND SOFTAIL MODELSGladiator forward controls are machined fromaircraft quality billet aluminum with a showchrome finish and one of a kind foot- andshifter pegs. Kits include a billet aluminum5/8" bore Kelsey-Hayes type master cylinder,rubber band equipped foot- and shifter pegs.The brake pedal and shift lever ride on bronzebushings for smoother and anti-wearoperation. Although their very exclusiveappearance these are real "Value for Money"kits.Available as a stock replacement as wellas 2" extended kits for long legged riders.Kits fit all 4 and 5 Speed Evolution Softailmodels as well as all 4 Speed FX and FLmodels from 1958 thru 1986.Fits 4-speed FL 1958 thru 1986,4-speed FX 1958 thru 1986 and all1984 thru 1999 Softails055101 Stock length055102 2" ExtendedNote: On some 1980 to 1984 FXE models the right side-mounting tab might not be installed.These models require installing of the weld-on mounting tab ZPN 233527.13Foot Pegs, Floorboards & Forward ControlsNOTE: WHEN INSTALLING EXTENDED FORWARD CONTROLS ON AMOTORCYCLE, MAKE SURE ALLE CLEARANCES ARE CHECKED13-037

Forward Control13Foot Pegs, Floorboards & Forward ControlsCHROME FORWARD CONTROLS WITH HYDRAULICFOOT CLUTCHThese forward controls feature a foot operated hydraulic clutch mastercylinder that frees your left hand to operate a hand shifter. Shifter andbrake arms are adjustable and roll on sealed bearings for smoothoperation. The clutch and brake master cylinders are 5/8" bore andhave inside mounted line fittings for neat and easy installation. Kitsare precision made on CNC machinery from solid billet aluminum, thanhigh luster polished and show chrome finished to perfection. Allmounting hardware included. Fits all 1989 thru 1999 Softails and mostcustom applications. Available with fixed "No slip" knurled foot andshifter pegs or folding Gladiator style pegs. Hand shifter is not included.055113 With fixed "No Slip" knurled pegs055114 With folding Gladiator pegsNOTE: WHEN INSTALLING EXTENDED FORWARDCONTROLS ON A MOTORCYCLE, MAKE SURE ALLECLEARANCES ARE CHECKED13-038

Forward ControlBILLET ALUMINUM FORWARD CONTROL KITS FOR 4AND 5 SPEED SOFTAIL MODELS AND 4 SPEED FXAND FL MODELSThese very complete and affordable forward control kits are machinedfrom aircraft quality billet aluminum. Kits include a billet aluminum3/4" bore Kelsey-Hayes type master cylinder, rubber band equippedfoot- and shifter pegs. The brake pedal and shift lever ride on bronzebushings for smoother and anti-wear operation. These "Value forMoney" kits are available as a stock replacement as well as 3" extendedkits for long legged riders. Kits fit all 4 and 5 Speed Evolution Softailmodels as well as all 4 Speed FX and FL models from 1958 thru 1986.Available in either chrome plated or polished versions. Chrome platedforward controls feature a pad style brake pedal,the polished aluminumversion features rubber band style brake pedals.Note: 3" Extended kit is not recommended for use on FLSTF Fat Boyor FLSTC Heritage models due to fender clearance. On some 1980 to1984 FXE models the right side-mounting tab might not be installed.These models require installing of the weld-on mounting tab ZPN233527.Chrome plated billet aluminum forward control kits056150 Stock length056151 3" ExtendedPolished billet aluminum forward control kits056170 Stock length056171 3" ExtendedReplacement parts144256 Smooth finish master cylinder polished144255 Smooth finish master cylinder chrome357020 Replacement foot- and shifter peg rubbersNote: Shifter rod not included.For 3" extended order ZPN 110060 shifter rod seperately.BLACK BILLET ALUMINUM FORWARD CONTROL KITFOR 4 AND 5 SPEED SOFTAIL MODELS AND 4 SPEEDFX AND FL MODELSBlack anodized version of our very complete and affordable billetaluminum forward control kit. Feature contrasting highlights that reallyenhance their appearance. Kit includes a billet aluminum 3/4" boreKelsey-Hayes type master cylinder, rubber band equipped foot- andshifter pegs. The brake pedal and shift lever ride on bronze bushingsfor smoother and anti-wear operation. This "Value for Money" kit isavailable as a stock replacement. Kit fits all 4 and 5 Speed EvolutionSoftail models as well as all 4 Speed FX and FL models from 1958 thru1986. On some 1980 to 1984 FXE models the right side-mounting tabmight not be installed.These models require installing of the weld-onmounting tab ZPN 233527.Black anodized billet aluminum forward control kit056305 Stock lengthReplacement parts357020 Replacement foot- and shifter peg rubbers13Foot Pegs, Floorboards & Forward Controls13-039

Forward Control13Foot Pegs, Floorboards & Forward ControlsPM "CONTOUR" BILLET ALUMINUM FORWARDCONTROLSWhat were once simple blocks of billet aluminum have been machinedinto impossibly smooth and graceful arms with steel shafts that rideon a Teflon bearing. PM forward controls for Softail models come withthe all new "Contour" master cylinder, featuring a 11/16" piston forthe ultimate in braking power and feel, and has a concealed banjofitting for an ultra clean look.The master cylinder design matches withthe PM "Contour" handlebar controls. Shift and brake pegs are fullyadjustable and have snap-in anti slip surface rubber inserts. The footpegs fold for convenience and safety and also feature anti-slip rubberinserts. "Contour" forward controls come with all required hardwareand are available for 2002 to present V-Rod, 1986 thru 1999 Softailmodels as well as for 2000 to present Softail models.Fits 2002 to present V-Rod VRSCA & VRSCX models,uses stock shift linkage and stock rear master cylinder722175 PolishedFits 1986 thru 1999 Softail models, come completewith kickstand mounting bracket and uses stockkickstand.721577 PolishedFits 2000 to present Softail models, uses stockkickstand721576 PolishedFits 1991 to present Dyna models740287 PolishedAccessories722176 Contour passenger pegs722173 Replacement rubbers for Contour peg (big)722174 Replacement rubbers for Contour pedal (small)PM CONTOUR MID MOUNT CONTROLSMore and more popular with the custom builder,mid controls are rapidlybecoming the choice of top builders. With PM's Contour belt drivePrimary and Clutch Housings as mounting points, the next logical stepfor the PM foot controls was right in the middle! Beginning with theirproven master cylinder, PM created a complex design that mountsfluently with in the Primary on the left and either integrated into thePM Clutch Housing on the right. For those using a Right Side Drivetransmission PM created a complete unitized hydraulic master cylinderand brake control. Both Left Side Drive and Right Side Drive versionsmust be installed with the PM Contour Primary. The Left Side DriveVersion also requires the use of PM's Hydraulic Clutch Housing. TheRight Side Drive version must be used with the PM Contour primary andPM Contour hydraulic clutch actuator/pulley guard. PM Contour MidMount controls are precision made from solid billet aluminum andcome with a perfect high luster polished finish.Two styles foot pegs tochoose from: round or knurled.For use on standard Left Side Drive bikes with PMContour primary and PM Contour hydraulic clutchhousing722746 With round pegs722748 With knurled pegsFor use on bikes with a Right Side Drive transmissionwith PM Contour primary and PM Contour hydraulicclutch actuator/pulley guard722747 With round pegs722749 With knurled pegsNote: PM Contour primary and Contour clutch actuators can be foundin Chapter 8.13-040

Forward ControlTÜV APPROVED BILLET ALUMINUM FORWARDCONTROLS FOR SOFTAIL MODELSThese German made forward controls are precision engineered to giveyou perfect feel and comfort.All parts are CNC machined from aircraftquality aluminum and have a high-gloss polished finish. Kits come preassembledwith stainless steel hardware. Brake pedal and shift leverride on bronze bushings for smoother and anti wear pedal operation.These very high quality kits are TÜV approved and are a bolt-onreplacement and utilize the stock mounting hardware and shifter rod.Foot pegs are ridged mount, and these as well as the shifter pegs areball milled. Available for 4 Speed models 1970 thru 1984, EvolutionSoftail models thru 1999 as well as Twin Cam Softail models 2000 topresent.741250 Fits 4 Speed models 1970 thru 1984 and EvolutionSoftail models thru 1999741251 Fits 2000 thru 2006 Twin Cam Softail modelsNote: On some 1980 to 1984 FXE models the right side mounting tabmay not be installed.These models require the installation of the weldonmounting tab ZPN 233527.13Foot Pegs, Floorboards & Forward ControlsNOTE: WHEN INSTALLING EXTENDED FORWARDCONTROLS ON A MOTORCYCLE, MAKE SURE ALLECLEARANCES ARE CHECKED13-041

Forward Control13Foot Pegs, Floorboards & Forward ControlsREBUFFINI ELLIPSE FORWARD CONTROLSRebuffini's Ellipse forward controls are radial machined from solid billetaluminum. Their fluent lines and smoothened edges give your bike atouch of class. Forward controls are available in 1" (2.5 cm) or 3"(7.5 cm) extended versions with a high luster polished finish, blackanodized or chrome plated. Ellipse controls come complete with anadjustable length shifter rod, 11/16" bore master cylinder, hiddenmaster cylinder linkage, folding footrests, roller bearings on all pivotpoints and detailed installation instructions. These forward controlsare bolt on for 2006 to present Dyna. Installation with the stockkickstand on 2000 thru 2006 Softail requires the separate purchase ofZPN 746562 kickstand adapter. On 2007 to present Softail a Rebuffiniadjustable kickstand kit must be used. These kickstands are alsoavailable for 1986 and later models. Matching passenger pegs are alsoavailable.Replacement rubbers and rebuild kits746489 Rebuild kit for 11/16" bore rear brake master cylinder746487 Rubber inserts for forward control pegs, set of 4746488 Rubber inserts for passenger pegs, set of 4Ellipse forward control kits for Softail, without TÜVPolished Black Chrome746445 746446 746447 Fits 1986 thru 1999,1" extended746457 746458 746459 Fits 1986 thru 1999,3" extended746451 746452 746453 Fits 2000 to present,1" extended746463 746464 746465 Fits 2000 to present,3" extendedNOTE: REBUFFINI RECOMMENDS THE USE OFNON-SILICONE DOT 4 HYDRAULIC FLUID.Ellipse forward control kits for Softail, TÜVapprovedPolished Black Chrome746448 746449 746450 Fits 1986 thru 1999, 1"extended746460 746461 746462 Fits 1986 thru 1999, 3"extended746454 746455 746456 Fits 2000 to present, 1"extended746466 746467 746468 Fits 2000 to present, 3"extendedAccessoriesPolished Black Chrome746559 746560 746561 Adjustable kickstand kit for1986 thru 2007 Softail746569 746570 746571 Adjustable kickstand kit for2008 to present Softail746472 746473 746474 Passenger foot peg set for1986 thru 1999 Softail746475 746476 746477 Passenger foot peg set for2000 to present Softail746520 746521 746522 Kickstand mount block-offkit, 1986 thru 1999 Softail746529 746530 746531 Kickstand mount block-offkit, 2000 to present Softail- - 746562 Chrome kickstand adapterfor use of 2000 thru 2006OEM kickstandReplacement pegs and adjustable shifter rodsPolished Black Chrome746553 746554 746555 Shifter rod for 1"extended controls746556 746557 746558 Shifter rod for 3"extended controls746478 746479 746480 Driver peg, left or right746481 746482 746483 Brake peg746484 746485 746486 Shifter peg13-042

Forward ControlREBUFFINI COMET FORWARD CONTROLSRebuffini's Comet controls drastically change the looks of your bike.They are radial machined from solid billet aluminum.Thanks to superbengineering, smooth lines and compact dimensions this is already avery nice kit, but given the fact that there are matching passenger pegsand various other accessories available you could call this a uniqueproduct. Forward controls are available in 1" (2.5 cm) or 3" (7.5 cm)extended versions with a high luster polished finish, black anodizedor chrome plated. Comet controls come complete with an adjustablelength shifter rod, 1 1/16" bore master cylinder, hidden master cylinderlinkage,folding footrests,roller bearings on all pivot points and detailedinstallation instructions. Installation with the stock kickstand on 2000thru 2006 Softail requires the separate purchase of ZPN 746562kickstand adapter. On 2007 to present Softail a Rebuffini adjustablekickstand kit must be used. These kickstands are also available for1986 and later models. Forward controls are pictured with the optionalkickstand mount block-off kit that must be ordered separately.Comet forward control kits, without TÜVPolished Black Chrome746490 746491 746492 Fits 1986 thru 1999 Softail, 1"extended746496 746497 746498 Fits 1986 thru 1999 Softail, 3"extended746502 746503 746504 Fits 2000 to present Softail, 1"extended746508 746509 746510 Fits 2000 to present Softail, 3"extendedComet forward control kits, TÜV approvedPolished Black Chrome746493 746494 746495 Fits 1986 thru 1999 Softail, 1"extended746499 746500 746501 Fits 1986 thru 1999 Softail, 3"extended746505 746506 746507 Fits 2000 to present Softail, 1"extended746511 746512 746513 Fits 2000 to present Softail, 3"extendedAccessoriesPolished Black Chrome746559 746560 746561 Adjustable kickstand kit for1986 thru 2007 Softail746569 746570 746571 Adjustable kickstand kit for2008 to present Softail746523 746524 746525 Passenger foot peg set for 1986thru 1999 Softail746526 746527 746528 Passenger foot peg set for 2000to present Softail746520 746521 746522 Kickstand mount block-off kit,1986 thru 1999 Softail746529 746530 746531 Kickstand mount block-off kit,2000 to present Softail746562 Chrome kickstand adapter for use of 2000 thru 2006OEM kickstandReplacement rubbers and rebuild kits746552 Rebuild kit for 11/16" bore rear brake master cylinder746544 Rubber inserts for driver pegs, set of 4746545 Rubber inserts for passenger pegs, set of 4Replacement pegs and adjustable shifter rodsPolished Black Chrome746553 746554 746555 Shifter rod for 1"extended controls746556 746557 746558 Shifter rod for 3"extended controls746532 746533 746534 Driver peg, right746538 746539 746540 Brake peg746535 746536 746537 Driver peg, left746541 746542 746543 Shifter pegNote: On some 1980 to 1984 FXE models the right side mounting tabmay not be installed.These models require the installation of the weldonmounting tab ZPN 233527.13Foot Pegs, Floorboards & Forward ControlsNOTE: REBUFFINI RECOMMENDS THE USE OFNON-SILICONE DOT 4 HYDRAULIC FLUID.NOTE: WHEN INSTALLING EXTENDED FORWARDCONTROLS ON A MOTORCYCLE, MAKE SURE ALLECLEARANCES ARE CHECKED13-043

Forward Control13Foot Pegs, Floorboards & Forward ControlsREBUFFINI MINI FORWARD CONTROLSA stylish and minimalist design by Rebuffini. Mini forward controls areCNC machined from solid billet aluminum available with a high lusterpolished finish,black anodized or chrome plated.These forward controlsare 1" extended compared with stock forward controls. They comecomplete with an adjustable length shifter rod, 11/16" bore mastercylinder, roller bearings on all pivot points and detailed installationinstructions. Hydraulic fluid reservoir and driver foot peg kit must beordered separately, allowing you to mix and match a combination thatlooks exactly the way you want it. Driver foot peg kits contain a pair offoot pegs, a brake peg and a shifter peg. Forward control kits forEvolution Softail models are to be installed with Rebuffini's adjustablekickstand ZPN 746779 or 746780 or a frame mounted kickstand.Mini forward control kits without foot pegs andbrake fluid reservoirPolished Black Chrome746591 746592 746593 Fits 1986 thru 1999Softail746594 746595 746596 Fits 2000 to presentSoftail746597 746598 746599 Fits 2006 to present DynaHydraulic fluid reservoirsPolished Black Chrome746193 746194 746195 Alpha Style746196 746197 746198 Beta Style746199 746200 746201 Gamma StyleNOTE: REBUFFINI RECOMMENDS THE USE OFNON-SILICONE DOT 4 HYDRAULIC FLUID.Mini Driver foot peg kitsPolished Black Chrome746603 746604 746605 Round style746600 746601 746602 Grain styleMini Passenger foot peg kitsPolished Black Chrome746612 746613 746614 Round style, fits 1986thru 1999 Softail746615 746616 746617 Round style, fits 2000 topresent Softail746606 746607 746608 Grain style, fits 1986 thru1999 Softail746609 746610 746611 Grain style, fits 2000 topresent Softail746590 Master cylinder rebuild kitFORWARD CONTROL SPACER BLOCKSWhen you have offset your primary it might be a pain to put your leftfoot on the peg or you might have problems finding your gear shiftpedal. These spacer block kits are made by Rebuffini from billetaluminum to overcome this problem. Kits contain a left and right sidespacer block. Can also be used with other forward controls, but it mightbe necessary to use longer or shorter screws than supplied in thesekits. Available polished, black anodized or chrome plated for bothEvolution and Twin Cam Softail in 18 or 26 mm.Polished746514 Fits 1986 thru 1999 Softail, 18 mm746546 Fits 1986 thru 1999 Softail, 26 mm746517 Fits 2000 to present Softail, 18 mm13-044

Chapter 13Cycle Kraft driver, passenger andshifter pegsThis is where your feet are completely in control. Shifterpegs, foot pegs, steps, brake pedals, floorboards andforward controls. No matter if you are looking for astock replacement part, or a chrome plated CustomBillet Aluminum set of forward controls, everything isthere. New in this issue are “The Factory” parts thatare traditionally hand-cast from bronze or aluminum.They feature a raw cast finish with polished accents.Another new range of products are Cycle Kraftaccessories from Ken’s Factory of Japan that featureoutstanding design and perfect finish.Zodiac’s Slasher floorboards areavailable for driver and passengerin chrome, black and bronzedNo School Choppers“Deathtrap” foot pegsCyclesmiths Banana floorboards aredistinct and cool looking with their longshape, curved tips and rivetedrubber surfaces.Zodiac’s forward control kit in blackwith highlighted accents fits most BigTwins from 1958 thru 1986 and 1986thru 1999 Softails

Shift & Foot PegsNESS-TECH FOOT, BRAKE &SHIFTER PEGSInnovative styles complete the look of yourbike. Matching handlebar grips are alsoavailable.All pegs are machined from 6061-T6 billet aluminum and available in chromeplated and/or black anodized. Foot pegs aremale mount as used on most Harley-Davidsonmodels for driver and/or passenger pegs.Mounts to install these pegs on crash barsare also available13Comfort Deep Cut, blackA06116 FootpegsA06119 Brake/Shifter pegARLEN NESS FUSION FOOT PEGSThe perfect fusion of traction, style andcomfort. Fusion male mount foot pegs aremade from forged steel for extremedurability,knurled rubber inserts for excellenttraction and billet aluminum accents for agreat look. Fusion shifter pegs are moldedrubber pegs that feature an integratedmounting stud with billet aluminum accents.Several styles to choose from in chrome andblack anodized finishes. Matching handlebargrips can be found in Chapter 14 of theZodiac Bikers Book.A07900 Slot Track foot pegs, chromeA07910 Slot Track brake/shifter peg,chromeA07901 Slot Track foot pegs, blackA07911 Slot Track brake/shifter peg,blackA07906 Ring Leader foot pegs, chromeA07916 Ring Leader brake/shifter peg,chromeA07907 Ring Leader foot pegs, blackA07917 Ring Leader brake/shifter peg,blackA07908 Deep Cut foot pegs, chromeA07918 Deep Cut brake/shifter peg,chromeA07909 Deep Cut foot pegs, blackA07919 Deep Cut brake/shifter peg,blackA07920 Smoothie foot pegs, chromeA07922 Smoothie brake/shifter peg,chromeA07921 Smoothie foot pegs, blackA07923 Smoothie brake/shifter peg,blackA07924 Knurled Rubber foot pegs,chromeA07926 Knurled Rubber brake/shifterpeg, chromeA07925 Knurled Rubber foot pegs,blackA07927 Knurled Rubber brake/shifterpeg, blackA07928A07930Beveled foot pegs,chromeBeveled brake/shifterpeg, chromeA07929A07931Beveled foot pegs, blackBeveled brake/shifterpeg, black13-046

Floorboards"THE FACTORY" CAST FOOT PEGSHand cast by "The Factory" these solid brassor aluminum foot pegs can be used in all7/16" female mount applications.Like almostany part from "The Factory", they feature araw cast finish with polished details. Sold inpairs.735470 Brass735471 Aluminum"THE FACTORY" CAST MOONSTYLE FLOORBOARD INSERTSTraditionally hand cast by "The Factory" thesesolid brass or solid aluminum floorboardinserts are a great looking replacement forthe stock rubber inserts on 1941 thru1965 Big Twins, as well as most aftermarketMoon style floorboards. Rubber mounted forcomfort and great classic looks, certainly incombination with other cast accessories from"The Factory" found elsewhere in thiscatalog. Available with or without cast-in"The Factory" logo.735454 Brass, plain735476 Aluminum, plain735455 Brass with logo735477 Aluminum with logo"THE FACTORY" CASTFLOORBOARD INSERTSHand cast by "The Factory" these solid brassor solid aluminum floorboard inserts are agreat looking replacement for the stockrubber inserts on most 1980 to presentTouring and FLST Softail models. Floorboardsare rubber mounted for comfort and give yourbike a great classic look. Certainly incombination with other traditionally castaccessories from "The Factory" foundelsewhere in our catalog. Inserts are, likealmost any part from "The Factory",attractively packed in an exclusive woodenbox. Available with or without cast-in "TheFactory" logo.735460 Brass, without logo735487 Aluminum, without logo735461 Brass with logo735488 Aluminum with logo13"THE FACTORY" CAST BRAKEAND SHIFTER PEGHand cast from brass or aluminum by "TheFactory" using traditional casting methods.Threaded to fit most applications. Greatvintage looks that can be combined withother cast accessories from "The Factory"found elsewhere in our catalog. Sold each.735465 Brass brake/shifter peg735492 Aluminium brake/shifterpeg13-047

FloorboardsARLEN NESS FUSIONFLOORBOARDSThe perfect fusion of billet and rubber toprovide the best in comfort and style. Fusiondriver floorboards can be fitted in 3 differentpositions giving a total of 3" (7.5cm) ofadjustability. Driver floorboards are 13.8"(35cm) long and 5" (12.7cm) wide.Passengerfloorboards measure 10" (25.4cm) long and4" (10.2cm) wide.Driver floorboard sets, fit1984 to present FLT, FLHT, FLTRand 1986 to present FLST SoftailA15400 Deep Cut, chromeA15401 Deep Cut, blackA15402 Smoothie, chromeA15403 Smoothie, blackA15404 Slot Track, chromeA15405 Slot Track, blackA15406 Ring Leader, chromeA15407 Ring Leader, blackA15409 Beveled, chromeA15410 Beveled, black13Passenger floorboard sets, fit1993 to present FLT, FLTR, FLHT,FLHRA15418 Deep Cut, chromeA15419 Deep Cut, blackA15411 Smoothie, chromeA15412 Smoothie, blackA15413 Slot Track, chromeA15414 Slot Track, blackA15415 Ring leader, chromeA15416 Ring leader, blackA15420 Beveled, chromeA15421 beveled, black13-048

FloorboardsCYCLESMITHS BANANA FLOOR BOARDS AND PEGSCyclesmiths Banana floorboards are distinct and cool looking with theirlong shape, curved front and rear tips and riveted high-grip rubbersurfaces.These billet aluminum beauties are available in 14" (36cm),19" (48cm) or even super-long 21" (53 cm) lengths. Matchingpassenger floorboards, brake pedal pad, shift pegs, and foot pegs arealso available. Floor boards fit all 1980 to present FLH and FLT seriesTouring and 1984 to present FLST series Softail models and are soldin pairs.745455 14" Floorboards, chrome745454 14" Floorboards, black745453 19" Floorboards, chrome745450 19" Floorboards, black745451 21" Floorboards, chrome745452 21" Floorboards, black745457 Passenger floorboards, chrome745456 Passenger floorboards, black745459 Brake pedal cover, chrome745458 Brake pedal cover, black745460 Shifter pedal cover, chrome745461 Shifter pedal cover, black745462 Foot/highway pegs, chrome, pair745463 Foot/highway pegs, black, pairCYCLE KRAFT NEO-FUSION FLOORBOARDSCNC machined from billet aluminum, these floorboards have thatdistinctive Japanese retro styling from Ken's Factory.Available with orwithout brass insert in polished finish or black anodized with clear cuts.Simple bolt-on installation that fits FLH and FLT series Touring models1980 to present and 1986 to present FLST series Softail models.747345 Black anodized with clear cuts747346 Polished747347 Black anodized with brass insert747348 Polished with brass insert13CYCLE KRAFT NEO-FUSION BRAKE PEDAL PADSJapanese retro styling, CNC machined from billet aluminum by Ken'sFactory. Available with or without brass insert in a polished finish orblack anodized with clear cuts. Simple bolt-on installation that fits FLHand FLT series Touring models 1986 to present.747351 Black anodized with clear cuts747352 Polished747353 Black anodized with brass insert747354 Polished with brass insert13-049

Floorboards/Brake Pedals & Backing PlatesARLEN NESS KNURLEDFLOORBOARD INSERTSA low cost alternative for a set of customfloorboards are these inserts that fit exactlyin the stock driver floorboard housings.A06782 Fit all 1980 to present FLTseries Touring models, FLHT,FLHS, Heritage Softail and FatBoy modelsA06783 Fit 2004 to present FLHXmodels and OEM Swept Wingaccessory boards13 REDUCED REACH PASSENGERFOOTBOARD MOUNTSIncrease passenger comfort with theinstallation of one of these kits. Fixed mountkit raises the height of your passengerfootboards by approximately 2 1/4" (5.7cm).Adjustable mounts raise and lower thepassenger footboard from 2'' (5cm) forwardfrom stock up to the highest position, whichis 2 1/2" (6.4cm) higher than stock. Easy toadjust with a common hex wrench. Kitsinclude left and right supports and allrequired mounting hardware.Fits all 1993 to present Touringmodels. Fixed mounts do not fitwith saddlebag guard bags057250 Fixed passenger footboardmounts, chrome(OEM 50789-99B)057251 Fixed passenger footboardmounts, black(OEM 50789-99B)057252 Adjustable passengerfootboard mounts, chrome(OEM 50768-07)057253 Adjustable passengerfootboard mounts, black(OEM 50768-07)HEEL GUARD FOR FOOTBOARDEQUIPPED MODELSThis heel guard mounts to the right-side riderfootboard, protecting your boot from contactwith the hot exhaust shield, so no damagedboots or hours of cleaning melted rubber scuffmarks from the exhaust shield. Does notrestrict the rider's foot in fore or aftmovement. Includes mounting hardware andis available in chrome or black.Fits 2012 FLD Switchback,1986 to present Touring and1986 to present FL Softailmodels with stock stylefootboards053586 Chrome rider footboard heelguard kit053587 Black rider footboard heelguard kitPASSENGER FLOORBOARDCOVERSThese covers fit exactly on the lower side ofthe stock cast passenger floorboards on all1987 to present FLH and FLT series Touring,and all 1986 to present FLST Softail and2006 to present Dyna models withOEM accessory floorboard mounts. Easy toinstall with the included hardware. Sold inpairs in chrome or black.361515 Chrome passenger floorboardcovers (OEM 50782-91)361516 Black passenger floorboardcoversFORWARD CONTROL SPACERBLOCKSWhen you have offset your primary it mightbe a pain to put your left foot on the peg oryou might have problems finding your gearshift pedal.These spacer block kits are madeby Rebuffini from billet aluminum toovercome this problem.Kits contain a left andright side spacer block. Can also be used withother forward controls, but it might benecessary to use longer or shorter screws thansupplied in these kits. Available polished,black anodized or chrome plated for bothEvolution and Twin Cam Softail in 18 or26mm.Polished746514 Fits 1986 thru 1999 Softail,18mm746546 Fits 1986 thru 1999 Softail,26mm746517 Fits 2000 to present Softail,18mm746549 Fits 2000 to present Softail,26mmBlack746515 Fits 1986 thru 1999 Softail,18mm746547 Fits 1986 thru 1999 Softail,26mm746518 Fits 2000 to present Softail,18mm746550 Fits 2000 to present Softail,26mmChrome746516 Fits 1986 thru 1999 Softail,18mm746548 Fits 1986 thru 1999 Softail,26mm746519 Fits 2000 to present Softail,18mm746551 Fits 2000 to present Softail,26mm13-050

Brake Pedals & Backing Plates/Forward Control6" FORWARD CONTROL EXTENSIONS FORSPORTSTERFor all you long-legged riders we have these forward control extensionkits for 2004 to present Sportster models. This kit re-uses the pedalsand foot pegs from your stock or aftermarket forward controls andincludes an extended brake lever support, extended shift lever supportand extended brake,- and shifter rods. Moves controls an incredible 6"(15 cm) forward.Available in chrome or black.056330 Chrome056331 Black13ARLEN NESS SHIFTER RODSCNC machined from 6061-T6 billet aluminum with black or chromefinish. Feature specially designed spherical bearing pressed in for aclean look in stead of those unsightly heim joints.Fits all Softail models 1986 to present and Touringmodels 1980 to presentA19930 Deep Cut round, chromeA19931 Deep Cut round, blackA19932 Beveled, chromeA19933 Beveled, blackA19912 Deep Cut Flat, chromeA19913 Deep Cut Flat, chromeA19914 Engraved, chromeA19915 Engraved, blackA19916 Holeshot, chromeA19917 Holeshot, blackREDUCED REACH KITS FOR SPORTSTERThis kit repositions the original equipment brake arm, shifter arm andfoot pegs 2" (5cm) backwards, bringing the controls closer to the riderfor added comfort and confidence. Kit also provides additional legclearance around the chassis and air cleaner as it also moves the leftfoot peg 1 1/2" (4cm) outwards and the right foot peg 1/2" (1.2cm)outwards. Kit includes heavy duty steel mounts, shortened brake andshifter rods and required hardware and re-uses the original equipmentcontrol supports, brake and shifter lever. Available in chrome or blackfor 2004 to present forward control equipped XL Sportster models,including our forward control kits ZPN 056135 and 056137.056276 Black reduced reach conversion kit (OEM 50700010)056277 Chrome reduced reach conversion kitFits XL1200X Sportster Fourty EightA19936 Beveled, chromeA19937 Beveled, blackA19934 Deep Cut round, chromeA19935 Deep Cut round, black13-051

Forward Control13FORWARD CONTROL KIT FOR DYNA GLIDE MODELSChrome plated forward control kit that fits all Dyna Glide models from2006 to present. Stock replacement for the Original Equipment partsas fitted on 2006 to present Dyna Wide Glide and FXDF, but can alsobe used on all other 2006 to present Dyna models when eliminatingthe mid-mount controls. A perfectly fitting and very easy to install kitthat uses the stock foot pegs. Comes complete with all requiredhardware. Tall riders may also consider the purchase of a separatelyavailable extension kit that will relocate the foot pegs and controlssome 2" (5cm) further forward.056269 Forward control kit for 2006 to present Dyna(OEM 49080-06). FLD Switchback models requireseperate purchase of footpegs056270 Fits 2006 to present Dyna models, with ZPN 056269 orsimilar forward controls, except FXDF and FXDWGmodels with both the front and rear exhaust headersrunning in front of the cam coverREAR BRAKE MASTER CYLINDER REPAIR KITS FOR1987 TO PRESENT MODELSComplete master cylinder repair kits for the rear master cylinder on1987 to present models. They include all internal parts needed for acomplete rebuild. O-Rings and cups are made exactly to Factoryspecifications out of special synthetic rubber to prevent swell.Fits rear master cylinder on 1987 thru2003 Sportster, 1987 thru 1994 FXR, 1987 to presentSoftail, 1991 to present Dyna and 1987 thru2007 FLH/T series models148202 Master cylinder repair kit (OEM 42382-87A)Fits rear master cylinder on 2004 thru2006 Sportster744482 Master cylinder repair kit (OEM 42810-04B)BILLET FORWARD CONTROL FOR SOFTAIL MODELSThese forward controls are another great looking product from KustomTech.The sleek design of the master cylinder will perfectly match withKustom Tech's contoured handlebar controls. The shift and brake pegas well as the footpegs have a rubber inlay that will prevent your feetfrom slipping of. Pegs will fold for your safety and convenience. Madefrom billet aluminum and then polished to a mirror shine high glossfinish or satin black anodized. Controls will fit all Softail models from1986 thru present. Set includes a banjo fitting and a shifter rod.Theseforward controls require a separate kickstand like ZPN 741128.Fits Softail models 1986 thru 1999751287 Polished with round hole arms751142 Black anodized with slotted arms751288 Black with round hole armsFits Softail models 2000 to present751289 Polished with round hole arms751286 Black anodized with round hole armsMaster cylinder rebuild kits751147 For 14mm bore751148 For 16mm boreFits rear master cylinder on 2007 to presentSportster744483 Master cylinder repair kit (OEM 42810-07A)13-052