UNISORB AK Fixator System - Unisorb Installation Technologies

AK FIXATOR ® SPECIFICATIONSAK2See Figure 4See Figure 6AKII AGILE FIXATOR ® SYSTEM SPECIFICATIONSDescriptionDimensionsSee Figures 1, 2 & 5See Figure 3Recommended machine dead weight4,400 lbs.Maximum allowable lifting load per Fixator ®26,500 lbs.Spring Constant22,800,000 lb./in.Minimum available overall height3.31 in.Approximate torque required to turn adjusting screw1 ft. lb./1000 lbs. loadMaximum allowable torque on adjusting screw29 ft. lb.Vertical adjustment per revolution of height adjusting screw 0.010 in.Maximum vertical adjustment0.200 in.Minimum height with v = 84 Spherical Seat3.31 in.Minimum height with v = 95 Spherical Seat3.74 in.Minimum height with v = 101 Spherical Seat3.98 in.Minimum height with v = 107 Spherical Seat4.21 in.Total overall height range with standard components1.10 in.Base area of basic unit59.4 sq. in.Weight of basic unit19.2 lbs.Weight of Toggle Clamp13.4 lbs.Approximate torque on anchor bolt nut at yield point of bolt 217 ft. lbs.Approximate tension on anchor bolt at yield point19,800 lbs.Anchor specifications with uplift resistance:With side anchors19,800 lbs.With Toggle Clamp12,000 lbs. max.With 'wes' center anchor19,800 lbs.With 'wcs' center anchor12,000 lbs.Resilient pad specifications:Stiffness with 6 mm thick pad2,000,000 lbs./in. min.Stiffness with 2 mm thick pad6,000,000 lbs./in. minCoefficient of friction >0.7Internal damping coefficient >0.15