UNISORB AK Fixator System - Unisorb Installation Technologies
UNISORB AK Fixator System - Unisorb Installation Technologies
UNISORB AK Fixator System - Unisorb Installation Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>AK</strong> FIXATOR ® INSTALLATION METHODS<strong>AK</strong>3-1Figure 1.This method of installation simply setsthe <strong>AK</strong>II Agile <strong>Fixator</strong> ® on the Opt. 'Y'Resilient Pad. The pad has a coefficientof friction of approximately .70which will quite effectively prevent the<strong>Fixator</strong> ® from walking. The pad is availablein either a 2 mm or 6 mm thickness.The standard pad is supplied in90 durometer, but different durometersare available on a special order basis(contact <strong>Unisorb</strong> Engineering). An Opt.'STE' Hold Down Stud is used to securethe <strong>Fixator</strong> ® to the machine foot.This method should be used whensome degree of vibration isolation isdesired, and when extremely close tolerancesare not a consideration.FIGURE 1. 'STE' CENTER BOLT - FREE STANDINGFigure 2.This method of installation utilizes<strong>Unisorb</strong> ® Adhesive V-100 Epoxy Groutapplied beneath the <strong>Fixator</strong> ® . Pleasenote that a minimum thickness of .09"is recommended. This method alsouses the Opt. 'STE' Hold Down Stud.This stud is capable of stretching toallow adjustment after the anchor nut istightened. This method provides asimple and inexpensive, relatively secureinstallation without disturbing thefloor. Please note that this methodprovides no option for vibration isolation.FIGURE 2. 'STE' CENTER BOLT - GLUE DOWN
Change language