UNISORB AK Fixator System - Unisorb Installation Technologies

AK FIXATOR ® INSTALLATION METHODSAK3-3Figure 5.This method of installation utilizes asingle, center mounted Unisorb ® CapsuleAnchor and Stud Assembly tosecurely fasten the Fixator ® to the floor.The Capsule Anchor and Stud Assemblymay be installed either before orafter the Fixator ® is in place. The recommendedpractice, however, is toinstall the anchor prior to placing theFixator ® . This installation method utilizeseither the Opt. 'Y' Resilient Pad orthe Adhesive V-100 Epoxy Grout andmay be utilized only if access to thecenter stud anchoring location is available.FIGURE 5. CENTER CAPSULE ANCHOR STUDFigure 6.This method of installation utilizes asingle, center mounted Unisorb ® Opt.'WES' Anchor Hold Down Stud. Thisstud is placed into a core drilled holeand secured with either Unisorb ® V-1cementitious or Standard V-100 EpoxyGrout. A Unisorb ® 12" x 15" GroutForm is used with this configuration.This method provides the most secureanchoring of all, and is recommendedwhen very close tolerances are requiredto be held, and when access tothe center anchoring location is available.Please note that this method providesno option for vibration isolation.FIGURE 6. 'WES' CENTER ANCHOR STUD