Foam Marker - Silvan Australia

Safety InformationBefore operating the foam marker read the following safety instructions.Failure to comply with these warnings may result in serious injury or death.Whilst Silvan foam markers incorporate all the necessary safety features, it is essential that any personoperating them is aware of the safety precautions that should be exercised.• Silvan foam markers are designed andmanufactured solely for the purpose ofdropping foam to define the area sprayedwhen agricultural chemicals are beingapplied to crops. Under no circumstancesshould they be used for any other purpose.• Before using the foam marker, carefully readand ensure you understand the contents ofthis manual and any other manual relevant tothe safe operation of any associated tractorand spraying machinery.• Before operating the foam marker read thesafety warnings carried on the unit and anyassociated equipment• Never allow an inadequately trained personto operate the foam marker.• Before use of any chemicals includingfoam concentrate refer to the chemicalmanufacturer’s label and safety instructionsfor safe handling procedures and the correctmethod of use. Always use therecommended personal protective clothingand equipment.• Ensure that all operators and associatedpersonnel are familiar with the legalregulations and codes of practice that applySpecificationsConcentrate TankPolytuff impact resistant polyethylene tank on galvanised steel mounting frame.Capacity 30 litres or 100 litresAir SupplyHeavy duty 12 volt DC diaphragm compressor.In line air bleed valve.Cab mounted on/off switch for compressor.Foam Delivery19 mm diameter reinforced PVC hose.(20 metres supplied in kit version)Manual change to right or left end of spray boom.Flexible RH and LH foam droppers.Page 4