Product Data Sheet - Valspar Coil & Extrusion
Product Data Sheet - Valspar Coil & Extrusion
Product Data Sheet - Valspar Coil & Extrusion
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
FLUROPON CLASSIC ® <strong>Coil</strong> Coating SystemFluropon’s PVDFdurability withSparkleFluropon Classic ® coatings are premium fluoropolymer coatingcontaining 70% PVDF resins that has a special metallic effect.Fluropon Premiere coatings are field-proven, high performanceexterior quality finishes. It provides outstanding resistance toultraviolet radiation resulting in exceptional color retention as wellsas resistance to chalking and chemical degradation. All of this donewith an additional sparkle that will be any building shine.BenefitsFluropon Classic coatings provide a number of unique benefitsincluding:h Exceptional dirt and stain resistanceh Outstanding color consistencyh Excellent overall adhesionh Great flexibility and formabilityColorsFluropon Classic coatings are available in a wide varietyof color from bright to neutrals and every color in between.SubstratesFluropon Classic coatings can be applied to a numberof pre-treated substrates:h Aluminumh Hot-Dip Galvanized (HDG)h G-90 galvanized steelEnd Uses:Fluropon Classic coatings are ideal for monumental high-risestructures and pre-engineered buildings including:h Architectural metal siding and roofing systemsh Wall panelsh Column coversh Brake metalh Other metal building componentsh Galvalume ®TO SPECIFY, WRITE: Factory applied, Fluropon Classic ® coating system by <strong>Valspar</strong>.
FLUROPON ® CLASSIC <strong>Coil</strong> Coating SystemDATA PERFORMANCE SPECIFICATIONS PRODUCT PERFORMANCETECHNICAL DATA Specular Gloss at 60° ASTM D 523 2 30 to 40Pencil Hardness ASTM D 3363T-Bend ASTM D 4145 5HB to H0T to 2T, no loss of adhesionCross Hatch Adhesion ASTM D 3359No loss of adhesionReverse Impact ASTM D 2794 Aluminum: metal thickness inch-pounds, no loss of adhesion5 1.5x3HDG or Galvalume ® : 3x metal thickness inch-pounds, no loss of adhesionHumidity ResistanceNo field blistersHumidity 100% RH 2000 Hours: ASTM D 2247Salt Spray1,000 Hours: ASTM B 117Flame Test ASTM E 84Dew Cycle Weatherometer200 Total Hours: ASTM D 3361Field Performance: ASTM D 4214Abrasion Resistance: ASTM D 968, Method ACreep from scribe ≤ 1/32 (1mm), no blistersClass A coatingChalk: Rating no less than 8Chalk: Rating no less than 8 at 20 yearsFilm integrity: 25 years65 ± 10 litersAPPLICATION Application Method Reverse roll coatSubstrate 1 Aluminum, HDG Steel, or Galvalume ®Viscosity ASTM D 4212 (No. 4 Zahn cup)Weight per Gallon ASTM D 147520 to 35 seconds9.3 to 9.7 pounds per gallonSolids per Volume ASTM D 2697 36 to 42% 4Solids per Weight ASTM D 2369 52 to 56% 4Reducing ThinnerVOC (Theoretical) ASTM D 3960Clean-Up SolventButyl Carbitol Acetate5.4 pounds per gallonMEK/DAA/MAKPeak Metal Temperature 460° to 490 °FContains LubricantMEK Double Rubs ASTM D 5402Yes100 PlusFLUROPON CLASSIC ® COATING SYSTEMFluropon Classic is a three coat PVDF systemwith a total Dry Film Thickness (DFT) of 1.65 mils nominalClear CoatColor CoatPretreatedSubstrateTop CoatPrimerBackerClear top coat: 0.5 mils Top coat: 0.9 milsPrimer: 0.25 milsPrimer(1) All substrates must be properly pretreated. (2) American Society for Testing and Materials. (3) FluroponClassic is not designed to bridge cracks in the substrate. (4) Varies by color. (5) Fluropon Classic coatings willgenerally meet the requirements for most post-painted fabrication processes. However, variations in metalquality, thickness or cleaning/pretreatment applications can lead to diminished flexibility.For details and health, safety and handling information, Material Safety <strong>Data</strong> <strong>Sheet</strong>s (MSDS) are available atwww.valsparcoilextrusion.com.Fluropon® is a trademark of The <strong>Valspar</strong> Corporation. The <strong>Valspar</strong> logo is a registered trademark of The<strong>Valspar</strong> Corporation. Galvalume© is a registered trademark of International Steel Group.VALSPAR MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIESINCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. VALSPAR WILL NOTBE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.<strong>Valspar</strong> <strong>Coil</strong> and <strong>Extrusion</strong> Coating DivisionPhone: 888-306-2645Email: coilhelp@valspar.comwww.valsparcoilextrusion.comVAL5002C 2012-08©The <strong>Valspar</strong> Corporation. All Rights Reserved
Change language