SMART 2 Colorimeter - Field Environmental Instruments

SMART 2 ColorimeterThe user-friendly SMART2 Colorimeter is thedirect reading colorimeter for complete onsitewater analyses. All of the 50 preprogrammedtests can be run on thiscompact instrument and each test featuresautomatic wavelength selection. The entiremulti-LED optical system is embedded in thelight chamber and optimized for LaMotte testreagent systems. This enables the analyst tosimply select the test and put in the samplewith reagent. The microprocessor, whichselects the wavelength, also allows the userto load up to 10 tests for analyzing customreagent systems.Advanced Features:• Menu-driven display• Over 50 pre-programmed tests with 10 user tests• Automatic wavelength selection• The SMART 2 Colorimeter is supplied with 4 sample tubes, AC adapter,and instruction manual including test procedures.Specifications:Light Source: LED/filter setup at 430nm, 520nm, 570nm, 620nmDetector:Display:Range:Resolution:Accuracy:CE Mark:Sample Cell:Power:Battery Life:Datalogging:Calibration:Keypad:Size:Weight:Photodiode122x32 LCD, 16x4 line graphics display-2 to 2 Absorbance Units (AU)1% FS2% FSYes25 mm round cell, 10 mm square cuvette, 16mm COD tubes9V or AC adapter500 testsRS-232, time and date stampedFactory set6-button membrane switch15 x 8 x 5.5 cm; 6 x 3.25 x 2.5 inches11 ounces

Item DescriptionSMART 2, 120V/60Hz,Comes with 4 sample tubes, AC adapter, instruction manualSMART 2, 220V/50Hz,Comes with 4 sample tubes, AC adapter, instruction manualSmall field carrying caseLarge Carrying CaseOrder Code19191919-EX21919-GCS1501919-GCS440COD Adapter 5-0087UDV Adapter 5-0086