Technical Data Sheet fischer fixit Thread Lock Medium Strength LS M

Technical Data Sheetfischer fixit Thread Lock Medium Strength LS MProperties Value Unit Method / RemarksSystemChemical BaseSolventConsistencyMethacrylate esternonfluidDensity 1.05 g/ml 20 °CColor, cured adhesiveblueFlashpoint > 100 °CStorage temperature range < 25 °CShelf life 12 monthsHandlingApplication temperature range +5 to +35 °COpen time 10 - 20 min 25 ± 2 °CCure time for handling 1 - 3 h 25 ± 2 °CFully cured after 12 h 25 ± 2 °CMax. gap fill 0.25 mmViscosity 2 000 – 7 500 mPas 25 °C, Sp2/100 UPMAppllicationone sidedPerformance of cured materialMax. thread size M 36 metricStrength 2 DIN 30661Service temperature range -55 to +150 °CChemical resistancerefer to section belowShear strength 9 - 13 N/mm 2 DIN 54452Breakaway torque 17 - 22 Nmversion: 1/2008-04-01/TDB116GB page 1/3

Technical Data SheetApplicationBonds, seals and secures threaded connections, assembly parts, bearings and tube connections.Properties / Features- Easy, secure and long-lasting- Exact dosageSurface cleaningThe parts to be attached together must be clean and free of oil and grease.Directions for useThe parts to be attached together must be clean and free of oil and grease.Immediate installation after application is not necessary, as the material only reacts when the partsare put together. Able to bear loads after 1 to 3 hours. Final hardness after 12 hours. Curing may beaccelerated by increased temperature.Spans gaps up to 0.25 mm.Withstands temperatures from -55°C to +150°C.Normal to remove. Breakaway torque 17-22 Nm.Fill level is dependent on technical limitations.CleanupBefore hardening with acetone.StorageStore at room temperature.Chemical resistanceResistant to oil, petrol, diesel and battery acids.Classification and LabellingXi IrritantContains: 2-hydroxyethyl methacrylate, Methacrylic acid, monoester with propane-1,2-diolIrritating to eyes, respiratory system and skin. May cause sensitisation by skin contact. Avoid contactwith skin. In case of contact with eyes, rinse immediately with plenty of water and seek medicaladvice. After contact with skin, wash immediately with plenty of water and soap. Wear suitable glovesand eye/face protection.Only recycle when empty.For further safe handling information on this product, consult the Material Safety Data Sheet (MSDS).version: 1/2008-04-01/TDB116GB page 2/3