FIST-GR2

5.1.3 Remove the side duct support bracket.5.1.6 Use the template or the rack itself to mark the securingpositions of the second rack on the floor and drill the holes in the floor.Install the selected plugs depending on the floor surface.5.1.4 Remove the cage nuts of the panel securing points. Don’t usethe cage-nut tool.5.1.7 Hook in the additional rack and level it by turning theadjustable feet. Tighten the screws through the adjustable feet to thepreinstalled plugs in the floor.5.2 Back to back5.1.5 Install on the top and bottom of the side panel a side toside (STS) attachment plate. If necessary remove the pigtail exit plateon the top to have better access.5.2.1 In case of a rack with back panel, remove the grounding wireinstalled on the back panel before removing it.5