13.07.2015 Views

UCS-CM - YE International

UCS-CM - YE International

UCS-CM - YE International

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>UCS</strong>-<strong>CM</strong>Connection MagazineThe <strong>UCS</strong> (Universal Connection System)family of products provides a reliable, quickand easy to use system for wiremanagement.The <strong>UCS</strong> Connection Magazine utilises aninsulation displacement contact (IDC).This provides fast and reliable wiretermination while eliminating time-consumingwire stripping and wrapping or soldering.The design of the IDC terminals allows it toterminate a variety of wire sizes and insulationtypes. It will accept 0.40 mm to 0.80 mm(26 to 20 AWG) solid wire. The contact willterminate hard PE wire insulations as well asthe more common PVC insulation. It’s madeof silver plated brass alloy.The <strong>UCS</strong>-<strong>CM</strong> is a 10-pair magazine designedfor Installations where reliable, inexpensive,straight-through termination is desired. Thisincludes distribution frames and on customerpremises, as well as in outside plantinstallations.The plastic magazine surrounds each IDCterminal, making installation and tracing ofwires simpler. All the terminals are recessedwithin the housing, providing an electrically“dead front” which virtually eliminates shortcircuits on the front face.A wide range of accessories is available, suchas test/patch-cords, magazine label holder,hinged label holder and circuit marker plugs.U C S - C M


<strong>UCS</strong>-<strong>CM</strong>The Contact advantagesThe combination of both contact design (a)and slot ribs (b) lead to a significantimprovement in the mechanicalcharacteristics (stress and vibrationresistance) of the connection by:(a) guaranteeing a tighter fixation pointand isolation of the wire.(b) wire contact at 45° angles wichincreases the distance betweenopposite contact points, makes theinstallation easier and minimizesaxial and torsional residual stresses.Connection terminalOvervoltage magazineTest cordsMagazine label holderInstallation toolHinged label holderNumbering setTyco and <strong>UCS</strong> are trademarks of Tyco <strong>International</strong>.The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, Tyco Electronics makes no warrantiesas to its accuracy or completeness and disclaims any liability in connection with its use. Tyco Electronics’ obligations shall only be as set forth in Tyco Electronics’ Standard Terms and Conditions of Salefor this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of Tyco Electronicsproducts should make their own evaluation to determine the suitability of each such product for the specific application.Mondragon Telecommunications S.L.Polígono industrial MediterráneoC/. La Fila, parcela 146550 Albuixech-Valencia, EspañaTel.: 34-96-141 70 72Fax: 34-96-141 74 15Tyco Electronics Raychem NVTelecom Outside PlantDiestsesteenweg 6923010 Kessel-Lo, BelgiumTel.: 32-16 351 011Fax: 32-16 351 697www.tycoelectronics.comTyco Electronics CorporationTelecom Outside Plant8000 Purfoy RoadFuquay VarinaNC 27526-9349Tel.:1-919-557-8900Fax:1-919-557-8598TC 628/M/DS/3 08/02

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!