References Multiturn absolute encoders - Trinet

CharacteristicsMultiturn absolute encodersØ 58 mm encodersEncoders with type NB or NG output stage : NPN open collector output with PTC protection, 11…30 V, binary code (NB) or Gray code (NG)Supply voltageNo-load current consumptionProtectionOutput currentc 11…30 V. Maximum ripple : 500 mV100 mAShort-circuit and reverse polarity protection20 mA max.Output levels Low state Referred to load + V line : 1.25 V(for U supply = 30 V)High state Referred to load + V line : 29 VSchemes Output stage Input stageDirection selectionOutput+ 5 V+ V39 V100 nF5,1 V0 VClockwise direction : “Direction” terminal connected to + VAnticlockwise direction : “Direction” terminal connected to 0 VEncoders with type SB or SG output stage : SSI output without parity, 25 bit clock, 11…30 V, binary code (SB) or Gray code (SG)Supply voltageNo-load current consumptionOutput levelClock inputc 11…30 V. Maximum ripple : 500 mV100 mA5 V max. for maximum current of 40 mA7 mA current loop for voltage of 5 VSchemes RS 422 serial output RS 422 clock input1 nF1 nFDATA –CLK –DATA + CLK +1 nF1 nFInput stageDirection selection+ V0 V33 V100 nF5,1 VClockwise direction : “Direction” terminal connected to 0 VAnticlockwise direction : “Direction” terminal connected to + VReferences :pages 30508/4 and 30508/5Dimensions :page 30510/2Connections :pages 30510/4 and 30510/5Schneider Electric30508-EN_Ver2.1.fm/3