WEB01A TCP/IP Ethernet RFID Reader - QKits

More documents

Recommendations

Info

Example of dhcpd.conf:#example of dhcpd.conf for web08sddns-update-stylead-hoc;subnet 192.168.1.0 netmask 255.255.255.0 {# --- default gatewayoption routers 192.168.1.1; # default gatewayoption subnet-mask 255.255.255.0; # netmaskoption www-server 192.168.1.123; # it must setup to the web server’s IPrange dynamic-bootp 192.168.1.10 192.168.1.99;default-lease-time 300;max-lease-time 3600;}WEB08S TCP/IP Ethernet WEB Client RFID reader, version 0.4 5
2. InstallationIn order to work properly, WEB08S must have stable power supply, a 10-baseT Ethernetconnection, an optional slave reader and an optional electric strike or magnetic lock.2.1 Power RequirementsWEB08S requires 9 to 12V DC 500mA for normal operation.There are two ways to supply the power to the reader:2.1.1 Terminal BlockApply the power to the terminal block, with positiveterminal to VIN and negative terminal to GND (ground).2.1.2 Power from Cat-5/e EthernetcableApply the power through the Ethernet cable on the RJ45 connector. Pin 7 and 8 isconnected to GND (ground), and Pin 4 and 5 is connected to VIN. Meanwhile, jumpblock J3 must be shorted out by four two-pin jumper cap.WEB08S TCP/IP Ethernet WEB Client RFID reader, version 0.4 6
Page 1 and 2: WEB08SUSER MANUALTCP/IP EthernetHTT
Page 3 and 4: 3.2.11 NM=xxx.xxx.xxx.xxx..........
Page 5: 1. Setup the readerIn order to work
Page 9 and 10: installed outside the premises whil
Page 11 and 12: It is the unique code number of the
Page 13 and 14: 3.2.4 GRNT=xxSet the reader to a gr
Page 15 and 16: 3.2.12 WS=xxx.xxx.xxx.xxxThis is a
Page 17: eak;}echo ""; // ending flag?>WEB08

WEB01A TCP/IP Ethernet RFID Reader - QKits

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?