BIOPAC MRI catalog

More documents

Recommendations

Info

Airflow & Gas Analysis Noninvasive Blood Pressure Stimulation — page 10Biopotentials — page 4 Pulse Subject FeedbackElectrodermal Activity — EDA (GSR) Respiration TemperatureGating UnitsSpO2Airflow & Gas AnalysisPerform a variety of tests. Place transducer outside the bore in the MRI Chamber Room andrun tubing to connect to the subject and breathing accessories; place amp in Control Room.End Tidal CO2 Setup: C02100C amp + AFT31-MRI tubing + AFT35-MRI airflow kitAirflow & Lung Volume Setup: DA100C + MECMRI-DA + TSD117-MRI ±300 L/min transducer +AFT11A + AFT7-L + AFT35-MRI + Optional - add End Tidal: AFT31-MRI + CO2100CMetabolic Setup: DA100C + MECMRI-DA + TSD117-MRI ±300 L/min transducer +to transducer port A: AFT11A + AFT7-L + AFT35-MRI andto transducer port B: AFT11A + AFT7 + AFT15A/B + AFT31-MRI + CO2100C and/or O2100CAFT Accessories Go to biopac.com for the complete line of MR Safe options• New! Subject Airflow Kit: AFT35-MRI (right-angle port, T-valve, mouthpiece, facemask, and noseclips) provides 6 cm or 12 cm clearance from mouth to fMRI coil.• Tubing: 30 mm ID AFT7 (1 m) and AFT7-L (3 m)3.175 mm ID AFT31-MRI (10 m, male & female Luer locks, “Y” adapter)• Couplers: AFT11D joins AFT7 tubing segments, AFT11A connects AFT7 to TSD117-MRI• Mixing Chamber: AFT15A ( 5 L) or AFT15B (8 L)RespirationFully-pneumatic Respiration Transducer — Recommended MethodSetup: DA100C amplifier + TSD221-MRI transducerNew! Measure thoracic or abdominal respiration in the MRI withminimal resistance to movement. The TSD221-MRI includes therespiration sensor in a mesh strap with self-adhering band (70 cm),a pressure transducer (±12.5 cm H2O), and three cascadablesegments of tubing for up to 15.8 m. Has no ferrous metals orconductive parts and does not require the MECMRI-DA.Respiratory Effort TransducerRespiration dataSetup: MECMRI-TRANS + RSP100C amp + TSD201 transducerThe respiratory effort transducer measures changes in thoracic or abdominal circumference thatoccur as the subject breathes. Uses adjustable Velcro strap to fit a wide range of subjects.Gating UnitsDigital Trigger / R-Wave Sync DTU100 Setup: HLT100C interface module + DTU100 TriggerTrigger an MRI System with the occurrence of the R-wave present in ECG, respiratory data or bloodpressure for gating purposes. This external hardware unit accepts data from any pulsatile analog outputassociated with an MP System and converts it into a TTL-compatible trigger to trigger an MRI.• Trigger timing resolution is excellent because it is controlled solely by the real time analogreference signal and is independent of the OS and associated communication delays.Cardio/Respiratory Gating DTU300 Setup: DTU300 Gating SystemUse the DTU300 to trigger the MRI on the basis of two physiological signals, such as a cardiac signal(ECG, pulse, or BP) plus a respiration signal. See page 6 for details.
Noninvasive Blood Pressure - Wireless Monitoring SystemSetup: HLT100C interface module + NIBP-MRIThe NIBP-MRI provides real-time, beat-to-beat pressuremeasurement values during magnetic resonance imaging. Thesystem tracks systolic and diastolic blood pressure (using Pulse-Decomposition Analysis technology). The device analyzes thetiming and amplitudes of the primary left ventricular ejectionpulse as well as the arterial pulse reflections, at the thumb, middlephalange of the middle finger, at the wrist, or on the upper arm.PulsePulse - Photo PlethysmographSetup: MECMRI-TRANS + PPG100C-MRI amp + TSD200-MRI transducerThe TSD200-MRI transducer is sensitive to Blood Volume Pulse (BVP) via photo-plethysmographicmethods. Use it to record the blood volume pulse pressure waveform. It’s primarilydesigned for finger or toe attachment, but can be taped to other body locations with TAPE1.Pulse - Pressure PadSetup: DA100Camp + AFT30-XL tubing (included) throughwave guide + TSD110-MRI transducerThe TSD110-MRI consists of a differential pressure transducer,sensor, and tubing. Use it to record pulse and pulse rate—itrequires no electrical connections between MRI control andchamber rooms and works on a number of body locations.Affix to finger or major pulse point with TAPE1.Oxygen SaturationNIBP-MRI dataElectrodermal ActivitySetup: MECMRI-TRANS + EDA100C-MRI amplifier + lead/electrodesRecord EDA inside the MRI. Use AcqKnowledge software filters to improve the quality of theEDA signal, if required, and provide automated analysis.Electrodes•Disposable: For excellent EDA responses, BIOPAC recommendsEL509 dry disposable electrodes with GEL101 andLEAD108 (1.8 m), LEAD108A (3.6 m),LEAD108B (15 cm), or LEAD108C (30 cm).•Reusable: Disposable electrodes are recommended, but reusableEDA dataTSD203 electrodes will also work for skin conductance.Pulse dataSetup: OXY-MRI New! Use as stand alone system or connect to MP SystemSpO2 amplifier with fiber-optic finger sensor for adult human pulse oximetry.Pulse Rate Range: 18–321 BPM, Saturation Accuracy (Arms): 70–100% ± 2 digits.Includes isolation adapter and cables to connect to an existing HLT100C forMP Systems. Additional finger sensors available: OXY-MRI-SENSOR.
Page 1 and 2: For the Life SciencesMRI Solutions
Page 3 and 4: MP150 Data Acquisition &Combine the
Page 5 and 6: When recording biopotentials in the
Page 7: Gating UnitsThe gating unit is plac
Page 11 and 12: Stand-alone Fiber-Optic Temperature

BIOPAC MRI catalog

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?