Free Surface Impinging Jet

More documents

Recommendations

Info

Heat transfer under free surfaceimpinging jet – Nusselt NumberCorrelation for stagnationheat transfer for turbulentjets issuing from fullydeveloped pipe-typenozzles (Steven et al.(1992)120.93RedNu,= Prd o0.4Laminar model in close agreement with exp. results,whereas turbulence model overestimate the exp. data by150%. Relaminarization of flow in the stagnation regiondoes occur.
Heat transfer under free surfaceimpinging jet – Nusselt NumberLaminar parabolic velocity profile gives the highest Nusseltnumber. Use converging nozzle to suppress turbulence generationwithin nozzle wall, in order to produce laminar parabolic profileand enhance heat transfer performance at the stagnation zone
Page 1 and 2: Free Surface Impinging JetWork done
Page 3 and 4: Introduction - Application• Verti
Page 5 and 6: Literature Review - FreeSurface Imp
Page 7: Mathematical Modelling - FreeSurfac
Page 10 and 11: Validation of laminar flow field in
Page 14 and 15: Heat transfer under free surfaceimp
Page 16 and 17: F'''Heat transfer under free surfac
Page 18 and 19: Heat transfer under free surfaceimp
Page 20 and 21: Heat transfer under partial submerg
Page 22 and 23: Heat transfer under partial submerg
Page 24 and 25: Conclusions•It was found that the
Page 26 and 27: References1. Womac, D.J., Ramadhyan
Page 28 and 29: References9. Stevens, J., Pan, Y.,

Free Surface Impinging Jet

Create successful ePaper yourself

Delete template?

Save as template?