download pdf - Indigo Telecom

CDM-570/570L Satellite Modem with Optional IP Module Revision 6Serial Remote ControlMN/CDM570L.IOMParameterTypeCommand(InstructionCode andQualifier)Arguments forCommand orResponse toQueryDescription of ArgumentsResponse toCommandQuery(InstructionCode andQualifier)Response to QueryViterbiFirmwareVersionVFW= 6 bytes Query only.Used to query Viterbi chips firmware version.Response format:VFW=Q1900 for modem with Qual Comm. Q1900 Viterbi chipVFW=aa.b.c for modem with Alteva Viterbi chip, whereaa.b.c is the chip’s FPGA firmware versionaa=major versionb=minor versionc=revisionExample: VFW=01.0.1Remote Eb/No N/A 4 bytes Query only.Returns the value of Eb/No of the remote demod.Responds 99.9 = remote demod unlocked.Responds xx.x if EDMAC is disabled.xx.x=02.0 to 16.0Example: REB=12.4Note: For values > 16.0 dB, the reply will be 16.0Tx Power LevelIncreaseN/A 3 bytes Query only.Returns the increase in Tx power level, in dB (from the nominalsetting) due to the action of AUPC. Range is 0.0 to 9.9 dBResponds x.x if AUPC is disabled.Example: PLI=2.3Tx Clock Source TCK= 1 byte, value 0thru 2Tx Data Invert TDI= 1 byte, value 0or 1Command or Query.Tx Clock Source, where:0=Internal1=Tx Terrestrial2= Loop-TimedExample: TCK=0 (selects Internal)Note: When TCK is changed from Internal to Non-Internal, ClockExtension Mode will be automatically changed to 0=None if it was1=TxLock. Reply: TCK+Command or Query.Invert Transmit Data0=Normal1=InvertedExample: TDI=1 (selects Inverted TX Data)VFW=VFW?VFW *VFW #VFW?VFW=xxxxxx(see description ofarguments)N/A REB? REB=xx.x(see description ofarguments)N/A PLI? PLI=x.x(see description ofarguments)TCK=TCK?TCK*TCK#TDI=TDI?TDI*TDI#TCK?TDI?TCK=x(see description ofarguments)TDI=x(see description ofarguments)13–11