download pdf - Indigo Telecom

CDM-570/570L Satellite Modem with Optional IP Module Revision 6Serial Remote ControlMN/CDM570L.IOMParameterTypeCommand(InstructionCode andQualifier)Arguments forCommand orResponse toQueryDescription of ArgumentsResponse toCommandQuery(InstructionCode andQualifier)Response to QueryRetrieve next 5unread StoredEventsClear All StoredEventsInitialize EventsPointerStatisticsSample IntervalN/A 75 bytes Query only.Unit returns the oldest 5 Stored Events which have not yet been readover the remote control. Reply format: {CR}Sub-body{CR}Subbody{CR}Sub-body{CR}Sub-body{CR}Sub-body,where Subbody=ABCddmmyyhhmmss,A being the fault/clear indicator.F=FaultC=ClearI=InfoB being the fault type where:1=Unit2=Rx Traffic3=Tx Traffic4=ODU5= Power on/off, or log clearedC is Fault Code numbers, as in FLT? or Info Code, which is:0=Power Off1=Power On2=Log Cleared3=Global Config Change4=Redundancy Config ChangeIf there are less than 5 events to be retrieved, the remaining positionsare padded with zeros.If there are no new events, the response is RNE*.CAE= None Command only.Forces the software to clear the software events log.Note: This command takes no arguments.Example: CAE=IEP= None Command only.Resets internal pointer to allow RNE? queries to start at thebeginning of the stored events log.SSI=1 byte,numericalCommand or Query.Used to set the sample interval for the Statistics Logging FunctionSSI=x, where x= 0 to 9 in 10 minute steps.Note: Setting this parameter to 0 disables the statistics loggingfunction.Example: SSI=3 means 30 minutesN/A RNE? RNE={CR}ABCddmmyyhhmmss{CR}ABCddmmyyhhmmss{CR}ABCddmmyyhhmmss{CR}ABCddmmyyhhmmss{CR}ABCddmmyyhhmmss(see description for detailsof arguments)CAE=CAE?CAE*CAE#IEP=IEP#SSI=SSI?SSI*SSI#N/AN/ASSI?N/AN/ASSI=x(see description for detailsof argument)13–21