Tapmatic Corporation - 2000 Technical Manual - FPGA-FAQ
Tapmatic Corporation - 2000 Technical Manual - FPGA-FAQ
Tapmatic Corporation - 2000 Technical Manual - FPGA-FAQ
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Tapmatic</strong><br />
Today, the only alternative to Constant Speed Tapping is synchronous<br />
feed tapping, a system designed around machine reversal, which<br />
requires the machine to reduce RPM as the synchronized feed rate is<br />
slowing down near the end of the stroke. Every machinist knows<br />
reducing RPM in the middle of a cut is bad for tool life.<br />
Synchronous feed also takes much more time especially since it<br />
requires 2 machine reversals for each tapped hole. Televised tests<br />
prove that <strong>Tapmatic</strong>'s CST system taps twice as fast as the new full<br />
sized machining centers using synchronous feed at the same RPM. Ask<br />
for your FREE copy of the <strong>Tapmatic</strong> "Tapping <strong>2000</strong>" video. You'll see<br />
that synchronous feed programming does not deliver the RPM it<br />
promises on the screen. Only CST does and...<br />
CST Tapping Heads<br />
Take A Big Load Off The Machine.<br />
Energy Consumption Comparison<br />
Test: Tap (144) 5/16" Holes<br />
Results: <strong>Tapmatic</strong> RDT uses 1/4th<br />
the energy of machine reversal and<br />
eliminates related machine wear and<br />
tear.<br />
CST is a modular system that allows <strong>Tapmatic</strong> to assemble a special<br />
tool to meet the manufacturers' specific requirements whether they<br />
be hard to reach holes, misalignment problems, precise thread depth<br />
or- You Tell Us at 800/854-6019.<br />
http://www.tapmatic.com/hispeedtapping.html (2 of 3) [1/4/2004 12:05:24 PM]<br />
Home | Company Profile | Tapping News Update | General Catalog<br />
Accessories | World Distribution | Hi-Speed Tapping | To Order<br />
Tapping Check List | Programming<br />
Installation | Tool Parts List | <strong>Technical</strong> Data | Trouble Shooting<br />
Tapping Safety | Customer Service | Contact Us<br />
TAPMATIC CORPORATION<br />
802 Clearwater Loop / Post Falls, ID 83854<br />
208.773.8048 / 800.854.6019 / Fax: 208.773.3021<br />
info@tapmatic.com<br />
Copyright © <strong>2000</strong> <strong>Tapmatic</strong> <strong>Corporation</strong><br />
Site hosted by Firsttel.com
Change language