Tapmatic Corporation - 2000 Technical Manual - FPGA-FAQ

More documents

Recommendations

Info

<strong>Tapmatic</strong> http://www.tapmatic.com/troubleshooting.html (8 of 8) [1/4/2004 12:05:27 PM]
<strong>Tapmatic</strong> Best viewed at 800x600 Use Internet Explorer Download FREE! To avoid serious injury and ensure best result for your tapping operation, Please Read Carefully All operator and safety instructions provided for your tapping attachment as well as all other safety instructions that are applicable, especially those for your machine tool. 1. Proper Clothing: The rotating spindle of a machine tool can snag loose fitting clothing, jewelry or long hair. Never wear jewelry, long sleeves, neckties, gloves or anything else that could become caught when operating a machine tool. Long hair must be restrained or netted to prevent it from becoming entangled in rotating spindle. Steel toed boots should also be worn in any machine environment. 2. Proper Eye Protection: Always wear safety glasses with side shields to protect your eyes from flying particles. 3. Proper Work Piece Fixturing: Never hold the work piece or the vise it is held in, by hand. The work piece must be clamped firmly to the table of the machine so that it cannot move, rotate or lift. http://www.tapmatic.com/tappingsafety.html (1 of 5) [1/4/2004 12:05:30 PM]
Page 1 and 2: Tapmatic Corporation - 2000 Technic
Page 5 and 6: Tapmatic Double Your Tap Life And Y
Page 7 and 8: Tapmatic TAPMATIC do Brasil manufac
Page 9 and 10: Better CNC Tapping Guaranteed With
Page 11 and 12: Constant Speed Tapping Also Cuts Cy
Page 13 and 14: Tapmatic RIGID AND TENSION COMPRESS
Page 15 and 16: Tapmatic Best viewed at 800x600 Use
Page 21 and 22: Tapmatic http://www.tapmatic.com/us
Page 25 and 26: Tapmatic Canada Tyson Tool Comp. Lt
Page 27 and 28: Tapmatic Indonesia Kawan Lama Sejah
Page 29 and 30: Tapmatic South Africa Duncan MacDon
Page 33 and 34: Tapmatic http://www.tapmatic.com/hi
Page 35 and 36: Tapmatic CNC Applications ● What
Page 39 and 40: Tapmatic Chattering on Tapped Threa
Page 41 and 42: Tapmatic Tap pulls out of collet ch
Page 43: Tapmatic Note: Coolant can be remov
Page 47 and 48: Tapmatic 7. Continuous High Product
Page 49 and 50: Tapmatic http://www.tapmatic.com/ta
Page 51 and 52: Tapmatic http://www.tapmatic.com/cu
Page 53 and 54: Tapmatic http://www.tapmatic.com/co
Page 55 and 56: Tapmatic -Cincinnati R-7 OD Grinder
Page 57 and 58: Speed Recommendations & Tool Select
Page 59 and 60: Tapmatic Corporation - Drill Select
Page 65 and 66: Tapmatic Corporation - Drill Size F
Page 67 and 68: Tapmatic Corporation - Drill Depth
Page 69 and 70: Tapmatic Corporation - Tap Recommen
Page 71 and 72: Tapmatic Corporation - Tap Recommen
Page 73 and 74: Tapmatic Corporation - Illustration
Page 75 and 76: Tapmatic Corporation - Illustration
Page 77 and 78: Tapmatic Corporation - Tap & Screw
Page 79 and 80: Tapmatic Corporation - Coarse Threa
Page 81 and 82: Tapmatic Corporation - Machine Reco
Page 83 and 84: Tapmatic Corporation - Machine Reco
Page 85 and 86: Tapmatic Corporation - Tapping Torq
Page 87 and 88: Tapmatic Corporation - Tapping Torq
Page 89 and 90: Tapmatic Corporation - Standard Tap
Page 95 and 96:
Tapmatic Corporation - Standard Tap
Page 97 and 98:
Tapmatic Corporation - Standard Pip
Page 99 and 100:
Tapmatic Corporation - Class of Thr
Page 101 and 102:
Tapmatic Corporation - Class of Thr
Page 103 and 104:
Tapmatic Corporation - Surface Trea
Page 105 and 106:
Tapmatic Corporation - Tapping Coll
Page 107 and 108:
Tapmatic Corporation - Tapping Form
Page 109 and 110:
Tapmatic Best viewed at 800x600 Use
Page 111 and 112:
Tapmatic Material: 8620 Tap Sizes:
Page 113 and 114:
Tapmatic CST Example: Machine Hourl
Page 115 and 116:
Page 117 and 118:
show all

Tapmatic Corporation - 2000 Technical Manual - FPGA-FAQ

Create successful ePaper yourself

Delete template?

Save as template?