Drywall Instructions - Finelite

FINELITEHigh Performance Wall 2’, 4’, 8’ Drywall Frame Kit InstructionsStep 1Slide frame rails onto the bracket.Step 2Repeat step 1 for all four corners, pushing the framerails onto the brackets until they lock into place.Step 3 Use proper backing, and cut out the dimensions asnoted below for the 2’, 4’, or 8’ HPW luminaire.Frame RailsFrame RailsSupportSpacingSupportSpacing8 1/8"SupportSpacing8 1/8"8 1/8"48 3/16"96 3/16"Bracket24 3/16"4’8’2’Drywall Frame KitStep 4 Install drywall frame kit in ceiling. Fasten drywall frame kit to backingusing proper fasteners through holes in the drywall frame kit.Secure drywall frame kit with #10 screws:• HPW 2’ - (3) #10 screws on each side (total 6)• HPW 4’ - (3) #10 screws on each side (total 6)• HPW 8’ - (5) #10 screws on each side (total 10)Step 5aRemove lamp 1 and reflector 2 before installing thefixture to the drywall frame. To install luminaire, pleaserefer to additional installation instruction.Step 5b Carefully remove Lamp. Remove screws asindicated below, and carefully remove reflector.Remove lamp and screwsPage 1FixtureRemove ReflectorRemove Lamp(Installation for HPW 4’ fixture shown here) (Screws by others) 1Finelite, Inc. • 30500 Whipple Road • Union City, CA 94587-1530 • 510 / 441-1100 • Fax: 510 / 441-1510 • www.finelite.com2Remove screwson both ends.© 2012 FINELITE, INC. ALL RIGHTS RESERVED. 98102.04/12

FINELITEHigh Performance Wall 2’, 4’, 8’ Drywall Frame Kit InstructionsStep 6 Secure fixture to drywall frame kit.Step 7 Reinstall reflector, lamp, and lens (if included).FixtureFixtureInstall Screw HereReflectorLampPage 29/16" From bottomof drywall kit1/4" From sideFinelite, Inc. • 30500 Whipple Road • Union City, CA 94587-1530 • 510 / 441-1100 • Fax: 510 / 441-1510 • www.finelite.comLens© 2012 FINELITE, INC. ALL RIGHTS RESERVED. 98102.04/12