Instrument Manifolds - Zycon

More documents

Recommendations

Info

General Purpose Instrument Manifolds at a GlanceHoke offers a variety of 2-,3-, and 5-valve instrument manifolds in direct and remote mount styles with ventconfigurations to meet most flow, pressure, and level measurement application requirements. Hoke 2–valvemanifolds are designed for static pressure and liquid level applications; the 3– and 5–valve manifolds are wellsuited for use with most differential pressure transmitters and can accept both female and flange processimpulse line connections.Valve FeaturesAll valves are hydrostatically tested at 1.5X maximum working pressure to assure leak tight performance. Stempacking is available in PTFE or Grafoil® materials with the metal non-rotating stem tip offered as standard.Gland adjuster packing seal canbe externally adjusted in serviceSafety locknutPacking is below the stem threadsto isolate threads from process mediaDead stem through packing giving easeof operation and less packing wearStem has back seatfor added securityPrecision Machined hard stemtip of AISI 316 stainless steelprovide consistent shutoffPressure vs. Temperature CurvesPTFE Packing* Maximum pressure 6000 psi (413 bar) at 212° F (100° C)Maximum pressure 4000 psi (275 bar) at 392° F (200° C)Grafoil® packing Maximum pressure 6000 psi (413 bar) at 212° F (100° C)Maximum pressure 3300 psi (230 bar) at 842° F (450° C)* PTFE packing rated to maximum temperature of 392° F (200° C)HOKE, Inc.405 Centura Court • PO Box 4866 (29305) • Spartanburg, SC 29303Phone (864) 574-7966 Fax (864) 587-5608www.hoke.com • sales@hoke.comPSI (Bar)8702 (600)7252 (500)5802 (400)4351 (300)2901 (200)1450 (100)Removable “T” bar handle aidslow torque operationDust cap on stem prevents inflowof contamination and protectsactuating threadsStem has rolled threads for smoothacting, strength, and long life. Stemthreads above packing, no processcontamination or lube washoutOne piece non-rotating stemtip joint located above packing,cannot work freeMetal to metal seal with bodysuitable for high pressuretemperature applications. Noneed for O-ring seals.00212(100)932(500)392 572 752(200) (300) (400)Fahrenheit (Celsius)PTFE Packing1112(600)Grafoil® Packinginstrument manifolds
2–Valve General Purpose Manifold–Direct MountDimensionsDimensions in inches (millimeters) are for reference only and are subject to change.VENTINSTRUMENTPORTFront view5.63” (143 mm)3.35” (85 mm)2.125” (54 mm)PROCESS IN2.40 (61 mm)Right side view1.625”(41.3 mm)½” NPT inletconnection0.79”(20 mm)¼” NPT vent plug(supplied loose)(63.5 mm)4.76” (121 mm)Vent valve(dustcap: red)Back viewIsolate valve(dustcap: blue)0.51(13 mm)1.50(38.1 mm)How to Order0.46 (11.8) diaTransmitter interfaceper IEC 61518, Type B2.125 ±0.012 - in.Center2 Mounting holesM8 x 0.47 (12) deeppart number packing Accessories (not included)GP821211F8YL PTFE Mounting kit–Order No. 800000K1 (page 8)GP821212F8YLGrafoil1.5” mounting bolts for Honeywell transmitter(4 required) – Order No. 095-0411-100HOKE Instrument Manifolds
Page 1: Instrument ManifoldsIndexGeneral Pu
Page 7 and 8: 5-Valve General Purpose Manifold-Di
Page 9 and 10: General Purpose Manifold Mounting K
Page 11 and 12: Trifold Needle Valve Manifold- Pipe
Page 13 and 14: Rotofold Ball Valve ManifoldThe Hok
Page 15 and 16: Rotofold Ball Valve Manifold - Pipe
Page 17 and 18: Pentafold 5-Valve ManifoldSpecial A
Page 19 and 20: Notes
Page 21 and 22: Notes

Instrument Manifolds - Zycon

Create successful ePaper yourself

Delete template?

Save as template?