Agilent Infiniium 4 Channel Oscilloscope 1 GHz

More documents

Recommendations

Info

InfiniiMax 1130 Series Performance Characteristics1134A, 1132A, 1131A, 1130ABandwidth* 1134A: > 7 GHz 1131A: > 3.5 GHz1132A: > 5 GHz 1130A: > 1.5 GHzRise and fall time (10% to 90%) 1134A: 60 ps 1131A: 100 ps1132A: 86 ps 1130A: 233 psSystem bandwidth (–3 dB)1134A with 54855A: 6 GHz1132A with 54854A: 4 GHz1131A with 54853A: 2.5 GHz1131A with 54846B: 2.25 GHz1131A with 54852A: 2 GHz1130A with 54832B/D, 33A/D: 1 GHzInput capacitance 1 Cm = 0.10 pF Cm is between tipsCg = 0.34 pF Cg is to ground for each tipCdiff = 0.27 pF Differential mode capacitance = Cm + Cg/2Cse = 0.44 pF Single-ended mode capacitance = Cm + CgInput resistance* Differential mode resistance = 50 kΩ ±2%Single-ended mode resistance = 25 kΩ ±2%Input dynamic rangeInput common mode rangeMaximum signal slew rateDC attenuationZero offset error referred to inputOffset rangeOffset accuracyNoise referred to inputPropagation delayMaximum input voltageESD tolerance5.0 V peak to peak, ± 2.5 V6.75 V peak to peak dc to 100 Hz; 1.25 V peak to peak > 100 Hz18 V/ns when probing a single-ended signal30 V/ns when probing a differential signal10:1 ± 3% before calibration on oscilloscope10:1 ± 1% after calibration on oscilloscope< 30 mV before calibration on oscilloscope< 5 mV after calibration on oscilloscope± 12.0 V when probing single-ended< ± 1% of setting when probing single-ended3.0 mV rms~6 ns (this delay can be deskewed relative to other signals)30 V peak, CAT I> 8 kV from 100 pF, 300 Ω HBM* Denotes warranted specifications, all others are typical.1 Measured using the probe amplifier and solder-in differential probe head with full bandwidth resistors.16
InfiniiMax 1130 Series Performance Characteristics (continued)Example of characterized performance plots: differential solder-in probe headdB630-3VoutVout / VinVindB0-10-20-30-68 GHz 3dB bandwidth (typical)-40-9-50-1210 8 10 9 10 10Frequency (Hz)-6010 8 10 9 10 10Frequency (Hz)Swept frequency responseCommon mode rejection vs. frequency0.20.150.1Volts0.05Vsourcetr=98 psVintr = 116 ps0.20.150.1Volts0.05Vintr = 116 psVouttr = 121 ps00-0.050 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2x 10Time (Seconds)-9Time-domain probe loading-0.050 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2x 10Time (Seconds)-9Time-domain probe tracking of 100 ps 10-90% stepOhms50 kΩ25 kΩ10 410 310 5 Frequency (Hz)Differential Mode InputSingle-EndedMode Input0.44 pF0.27 pFZmin = 272.4 ΩThe electrical properties of the oscilloscope’s probehead or probe accessory can often be the limitingfactor in the measurement bandwidth ormeasurement accuracy that can be realized inpractical use. The InfiniiMax probing system is theonly high-bandwidth probing system that providescharacterized performance plots for each of itsprobe heads. This allows you to see the measurementcapability you can achieve for a given use model.10 2Zmin = 201.7 ΩAdditional InfiniiMax probe information includinginput impedance SPICE models (and correspondingSPICE decks) for InfiniiMax probes can be foundonline at www.cos.agilent.com/manuals/scopes.html.10 110 6 10 7 10 8 10 9 10 10Impedance vs. frequencywww.agilent.com/find/infiniimax17
Page 1: Infiniium 54850 Series Oscilloscope
Page 6 and 7: Infiniium: “It’s like someone w
Page 8: InfiniiMax: The Worlds Best High-Sp
Page 11 and 12: Infiniium 54850 Series Performance
Page 13 and 14: Infiniium 54850 Series Performance
Page 15: Infiniium 54850 Series Performance
Page 19 and 20: Ordering Information (continued)Inf
Page 35 and 36: Ordering Information (continued)The

Agilent Infiniium 4 Channel Oscilloscope 1 GHz

Create successful ePaper yourself

Delete template?

Save as template?