TJA1053 Fault-tolerant CAN transceiver

Philips SemiconductorsProduct specificationFault-tolerant CAN transceiverTJA1053DATA SHEET STATUSDATA SHEET STATUSPRODUCTSTATUSDEFINITIONS (1)Objective specification Development This data sheet contains the design target or goal specifications forproduct development. Specification may change in any manner withoutnotice.Preliminary specification Qualification This data sheet contains preliminary data, and supplementary data will bepublished at a later date. Philips Semiconductors reserves the right tomake changes at any time without notice in order to improve design andsupply the best possible product.Product specification Production This data sheet contains final specifications. Philips Semiconductorsreserves the right to make changes at any time without notice in order toimprove design and supply the best possible product.Note1. Please consult the most recently issued data sheet before initiating or completing a design.DEFINITIONSShort-form specification ⎯ The data in a short-formspecification is extracted from a full data sheet with thesame type number and title. For detailed information seethe relevant data sheet or data handbook.Limiting values definition ⎯ Limiting values given are inaccordance with the Absolute Maximum Rating System(IEC 60134). Stress above one or more of the limitingvalues may cause permanent damage to the device.These are stress ratings only and operation of the deviceat these or at any other conditions above those given in theCharacteristics sections of the specification is not implied.Exposure to limiting values for extended periods mayaffect device reliability.Application information ⎯ Applications that aredescribed herein for any of these products are forillustrative purposes only. Philips Semiconductors makeno representation or warranty that such applications will besuitable for the specified use without further testing ormodification.DISCLAIMERSLife support applications ⎯ These products are notdesigned for use in life support appliances, devices, orsystems where malfunction of these products canreasonably be expected to result in personal injury. PhilipsSemiconductors customers using or selling these productsfor use in such applications do so at their own risk andagree to fully indemnify Philips Semiconductors for anydamages resulting from such application.Right to make changes ⎯ Philips Semiconductorsreserves the right to make changes, without notice, in theproducts, including circuits, standard cells, and/orsoftware, described or contained herein in order toimprove design and/or performance. PhilipsSemiconductors assumes no responsibility or liability forthe use of any of these products, conveys no licence or titleunder any patent, copyright, or mask work right to theseproducts, and makes no representations or warranties thatthese products are free from patent, copyright, or maskwork right infringement, unless otherwise specified.2000 Dec 18 17