safety gun with a flat nozzle

BLOW ’n GONE SYSTEMREPLACES CONVENTIONAL AIR GUNS FORCLEANING OUT HOLESBENEFITSNoise reduction – Halves the noise levelSaves compressed air – 30 - 45%Safety – No flying chipsThe SILVENT BLOW ’n GONE is an alternative to conventionalcleaning with compressed air. Instead of simply blowing chipsand similar debris aside, they are collected directly on site, providinga cleaner, quieter and safer working environment.BLOW ’n GONE is available as a complete system with filter bag(order number: BGS-10-100). The BLOW ’n GONE handle alone,with integrated control functions, is available for connection toexisting vacuum systems or industrial vacuum cleaning units (ordernumber: BGS-10-110).Using BLOW ’n GONE to clean brass casings cuts the noise level inhalf and, at the same time, creates a safer working environment.THE WORKING PRINCIPLEPRODUCT INFORMATIONORDER NO./ MODELAir consumptionSound level**Max evacuation hoselengthMax temp.WeightConnectionSupply hoseConnectionEvacuation hoseMaterialBGS10-100BGS10-110Nm 3 /hscfmdB(A)mm”C°F°glbsmm”mm”127.181150060-20/+70-4/+15812002.7061/4381.5127.181150060-20/+70-4/+1587001.5461/4381.5Aluminum, Brass, Ethyl vinyl acetate, Steel,Needled felt (polyester), NylonThe patented multi-jet nozzle provides effectiveclean-out of blind holes. Compressed air activatesadhering chips, setting them into motion and simultaneouslyblowing them away for collection in aseparate unit.**) The length of the evacuation hose may be extended when connectingto an additional vacuum source, e.g. an industrial vacuum cleaner.Max. operating pressure: 1.0 MPa (143 psi)3.32 www.silvent.com