Model PH8HF, PH8HFF Flow-Through Type Holder - Yokogawa

1. Specifications > 1-115. Solenoid Valve UNIT: mmGeneral Purpose Solenoid ValvePH8MV281104636Explosionproof Solenoid ValvePH8MVF9010510029864591 G1/21877286G1/2712-Rc1/29027Cautions on Installation of Solenoid Valve for Jet / Brush Cleaning1. Do not allow a sample solution to flow backward into the solenoid valve or to be replaced with the driving fluid.For this take relevant measures; e.g. install a check valve to prevent inverse pressure between the inlet and outlet of the solenoidvalve, or install the solenoid valve higher than the holder, especially when using the air jet/brush cleaning system.2. Make sure to avoid the risk of corrosion of the solenoid body (bronze) and seal (nitrilel rubber) by vapor or gaseous componentsgenerated from a sample solution, especially when using the air jet/brush cleaning system.F1.5.aiFigure 1.5Solenoid Valve for Jet & Brush CleaningIM 12B07N01-01E