Model PH8HF, PH8HFF Flow-Through Type Holder - Yokogawa

More documents

Recommendations

Info

Blank Page
2. Installation, Piping and Wiring > 2-12. Installation, Piping and Wiring2.1 Holder Installation2.1.1 Installation SiteInstall the flow-through type holder in a site where the holder can be easily maintained.2.1.2 Mounting the Flow-through Type HolderWhen strong piping - e.g. process piping - is next to the holder, mount the holder on it as shown inFigure 2.1.When a polypropylene holder is used, be careful not to apply excessive force to it.OutletOutletInletInletFigure 2.1Support by Process PipingF2.1E.aiIf the process piping is not strong enough to mount the holder, use mounting hardware (available asoption) to mount the holder on a vertical (or horizontal) pipe with sufficient strength as shown in Figure2.2. The holder can be mounted on a bracket as shown in Figure 2.3 (remove unnecessary parts fromthe metal fittings).Sensor Mounting NutFlow-ThroughType HolderStanchionFigure 2.2Pipe MountingF2.2E.aiIM 12B07N01-01E
Page 2 and 3: Blank Page
Page 4 and 5: ii For the safe use of this equipme
Page 6 and 7: iv After-sales Warranty• Do not m
Page 8 and 9: vi3.2.2 Cleaning the Brush.........
Page 10 and 11: 1-2< 1. Specifications >Utility req
Page 12 and 13: 1-4< 1. Specifications >1.2.2 Flow-
Page 14 and 15: 1-6< 1. Specifications >2. PH8HF -
Page 16 and 17: 1-8< 1. Specifications >2.2 PH8HF -
Page 18 and 19: 1-10< 1. Specifications >4. PH8HFF
Page 22 and 23: 2-2< 2. Installation, Piping and Wi
Page 32 and 33: 3-2< 3. Maintenance/Inspection >3.2
Page 34 and 35: 3-4< 3. Maintenance/Inspection >[Re
Page 36 and 37: YEW2PH8HF Non-Explosionproof Type12
Page 38 and 39: YEWPH8HFF Explosionproof Type41234N
Page 40 and 41: 6546 8 7 91015 14 121113321Item Par
Page 44 and 45: 1. Specifications > 1-115. Solenoid
Page 46: 5QtyModelPH8HFF-PPPH8HFF-S3Item Par

Model PH8HF, PH8HFF Flow-Through Type Holder - Yokogawa

Create successful ePaper yourself

Delete template?

Save as template?