Light Coves, Aluminum - DCS® Metal Column Covers - Light Coves

LC-1-PFSingle Radius Light CoveSAMPLE SPECIFICATIONSpecify as: PITTCON LIGHT COVEModel # LC-1-PFModel # LC-1-TFModel # LC-1-WMPerpendicular FinTangential FinWall MountingMaterial: Aluminum alloy.......3003 H-14 or equalFinish.............................Factory primedMetal thickness................. .090" typicalThe formed aluminum profile shall incorporate a continuousintegral fin for surface contact to conventionally installedgypsum drywall. The formed profile shall be primed withcorrosion-resistant primer compatible with joint compound,latex and enamel paints, and wall covering adhesives.Other materials and finishes are available with some restrictionsapplying, due to sconce and butt joint options. Contact factory oryour local Pittcon sales representative for details.Section LC-1-PFNo ScaleAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON CUSTOM CORPORATIONLC-1

Fin OptionsLight Fixture By Others1"(25.4 mm)Tape andSpackleType LC-1-PF with Perpendicular Fin4-3/8" (111.1 mm)3-1/2" (88.9 mm)6" (152.4 mm) MinimumLarger Sizes AvailableTape and SpackleType LC-1-TF with Tangent Fin6" (152.4 mm)Wide BracketsProvided for Placementevery 3' O.C.6" (152.4 mm)Radius Minimum(Larger SizesAvailable)Type LC-1-WM for Wall MountingNote: Min. 6-1/2" Radius This ShapeSection LC-1 -PFNo ScaleJoint DetailsTape andSpackle infieldEnd Caps Loose orFactory WeldedSpecial OptionsWall Sconce OptionMax. 10'-0" (3.048 M) LengthFactory-MiteredInside CornerFactory Mitered Corners23” 23”Factory-PreparedTaping JointsFactory-MiteredOutside CornerWall MountingBracket InstalledEvery 3’ O.C. Typ23”23”Transitions FromPF to TF at Bottomof SoffitNote: Typical Mitered Corners are Pro-vided with 23” x 23” Legs, But Can BeFactory-Cut to Any Size RequiredTypical 10’ StraightLengthPittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON ARCHITECTURAL METALS, LLC

LC-2-WMSingle Radius Light Covewith RevealSAMPLE SPECIFICATIONSpecify as: PITTCON LIGHT COVEModel # LC-2-WMModel # LC-2-PFModel # LC-2-TFWall MountingPerpendicular FinTangential FinMaterial: Aluminum alloy.......3003 H-14 or equalFinish.............................Factory primedMetal thickness................. .090" typicalThe formed aluminum profile shall incorporate a continuousintegral fin for surface contact to conventionally installedgypsum drywall. The formed profile shall be primed withcorrosion-resistant primer compatible with joint compound,latex and enamel paints, and wall covering adhesives.Other materials and finishes are available with some restrictionsapplying, due to sconce and butt joint options. Contact factory oryour local Pittcon sales representative for details.Section LC-2-WMNo ScaleAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON CUSTOM CORPORATIONLC-2

Fin OptionsLight Fixture By Others1"(25.4 mm)Tape andSpackleType LC-2-PF with Perpendicular Fin4-3/8" (111.1 mm)3-1/2" (88.9 mm)6-1/2" (165.1 mm) MinimumLarger Sizes AvailableTape andSpackleType LC-2-TF with Tangent Fin3/4"(19 mm)6" (152.4 mm)Wide BracketsProvided for Placementevery 3' O.C.6-1/2" (165.1 mm)Radius Minimum(Larger SizesAvailable)3/4"(19 mm)Type LC-2-WM for Wall MountingSection LC-2-WMNo ScaleJoint DetailsTape andSpackle infieldEnd Caps Loose orFactory WeldedSpecial OptionsWall Sconce OptionMax. 10'-0" (3.048 M) LengthFactory Mitered CornersFactory-MiteredInside Corner23”23”Factory-PreparedTaping Joints23”23”Transitions FromPF to TF at Bottomof SoffitFactory-MiteredOutside CornerWall MountingBracket InstalledEvery 3’ O.C. TypNote: Typical Mitered Corners are Pro-vided with 23” x 23” Legs, But Can BeFactory-Cut to Any Size RequiredTypical 10’ StraightLengthPittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON ARCHITECTURAL METALS, LLC

LC-3-PFDual Radius Light CoveSAMPLE SPECIFICATIONSpecify as: PITTCON LIGHT COVEModel # LC-3-PFModel # LC-3-TFModel # LC-3-WMPerpendicular FinTangential FinWall MountingMaterial: Aluminum alloy.......3003 H-14 or equalFinish.............................Factory primedMetal thickness................. .090" typicalThe formed aluminum profile shall incorporate a continuousintegral fin for surface contact to conventionally installedgypsum drywall. The formed profile shall be primed withcorrosion-resistant primer compatible with joint compound,latex and enamel paints, and wall covering adhesives.Other materials and finishes are available with some restrictionsapplying, due to sconce and butt joint options. Contact factory oryour local Pittcon sales representative for details.Section LC-3-PFNo ScaleAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON CUSTOM CORPORATIONLC-3

Fin Options7-5/8" (193.7 mm) Nominal, TF & PF8" (203.2 mm) Nominal, WMLight Fixture By Others1"(25.4 mm)1"Tape andSpackleType LC-3-PF with Perpendicular FinTape and SpackleType LC-3-TF with Tangent Fin4-3/8" (111.1 mm)6" (152.4 mm) Wide BracketsProvided for Placementevery 3' O.C.3-1/2" (88.9 mm)3" (76.2 mm)Radius Minimum(Larger SizesAvailable)3/4"(19.1 mm)3" (76.2 mm)Radius Minimum(Larger SizesAvailable)7-1/4" (184.2 mm) NominalLarger Sizes Available1-3/4"(44.4 mm)Type LC-3-WM for Wall Mounting1-1/4" (31.8 mm) TF & PF1-3/4" (44.4 mm) WMSection LC-3-PFNo ScaleJoint DetailsEnd Caps Loose orFactory WeldedSpecial OptionsWall Sconce OptionTape andSpackle infieldMax. 10'-0" (3.048 M) LengthFactory Mitered CornersFactory-MiteredInside Corner23”23”Factory-PreparedTaping Joints23”23”Transitions FromPF to TF at Bottomof SoffitFactory-Mitered Wall MountingOutside CornerBracket InstalledEvery 3’ O.C. TypNote: Typical Mitered Corners are Pro-vided with 23” x 23” Legs, But Can BeFactory-Cut to Any Size RequiredTypical 10’Straight LengthPittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON ARCHITECTURAL METALS, LLC

LC-4-PFDual Radius Light CoveSAMPLE SPECIFICATIONSpecify as: PITTCON LIGHT COVEModel # LC-4-PFModel # LC-4-TFModel # LC-4-WMPerpendicular FinTangential FinWall MountingMaterial: Aluminum alloy.......3003 H-14 or equalFinish.............................Factory primedMetal thickness................. .090" typicalThe formed aluminum profile shall incorporate a continuousintegral fin for surface contact to conventionally installedgypsum drywall. The formed profile shall be primed withcorrosion-resistant primer compatible with joint compound,latex and enamel paints, and wall covering adhesives.Other materials and finishes are available with some restrictionsapplying, due to sconce and butt joint options. Contact factory oryour local Pittcon sales representative for details.Section LC-4-PFNo ScaleAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON CUSTOM CORPORATIONLC-4

3-1/2" (88.9 mm)6-3/4" (171.4 mm) MinimumLarger Sizes AvailableFin Options8" (203.2 mm) NominalLight Fixture By OthersTape andSpackleType LC-4-PF with Perpendicular Fin4-3/8" (111.1 mm)3" (76.2 mm)Radius Minimum(Larger SizesAvailable)Tape and SpackleType LC-4-TF with Tangent Fin3" (76.2 mm)Radius Minimum(Larger SizesAvailable)Type LC-4-WM for Wall Mounting1-1/2"Section LC-4-PF(38.1 mm)No ScaleNote: Due to Mechanical Considerations, the LC-4 Profile isonly Available in 8' lengths.Joint DetailsTape andSpackle infieldEnd Caps Loose orFactory WeldedSpecial OptionsWall Sconce OptionMax. 10'-0" (3.048 M) LengthFactory Mitered CornersFactory-MiteredInside Corner23”23”Factory-PreparedTaping Joints23”23”Transitions FromPF to TF at Bottomof SoffitFactory-Mitered Wall MountingOutside CornerBracket InstalledEvery 3’ O.C. TypNote: Typical Mitered Corners are Pro-vided with 23” x 23” Legs, But Can BeFactory-Cut to Any Size RequiredTypical 10’Straight LengthPittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON ARCHITECTURAL METALS, LLC

LC-5-PFDual Radius Light CoveSAMPLE SPECIFICATIONSpecify as: PITTCON LIGHT COVEModel # LC-5-PFModel # LC-5-TFModel # LC-5-WMPerpendicular FinTangential FinWall MountingMaterial: Aluminum alloy.......3003 H-14 or equalFinish.............................Factory primedMetal thickness................. .090" typicalThe formed aluminum profile shall incorporate a continuousintegral fin for surface contact to conventionally installedgypsum drywall. The formed profile shall be primed withcorrosion-resistant primer compatible with joint compound,latex and enamel paints, and wall covering adhesives.Other materials and finishes are available with some restrictionsapplying, due to sconce and butt joint options. Contact factory oryour local Pittcon sales representative for details.Section LC-5-PFNo ScaleAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON CUSTOM CORPORATIONLC-5

Fin Options6-3/4" (171.4 mm) NominalLight Fixture By OthersType LC-5-PF with Perpendicular FinTape and SpackleType LC-5-TF with Tangent FinTape andSpackle4-3/8" (111.1 mm)3-1/2" (88.9 mm)6" (152.4 mm)Wide BracketsProvided for Placementevery 3' O.C.2" (50.8 mm)Radius Minimum6-1/4" (158.8 mm) MinimumLarger Sizes AvailableType LC-5-WM for Wall MountingSection LC-5-PFNo ScaleJoint DetailsTape andSpackle infieldEnd Caps Loose orFactory WeldedSpecial OptionsWall Sconce OptionMax. 10'-0" (3.048 M) LengthFactory Mitered CornersFactory-MiteredInside Corner23”23”Factory-PreparedTaping Joints23”23”Transitions FromPF to TF at Bottomof SoffitFactory-MiteredOutside CornerWall MountingBracket InstalledEvery 3’ O.C. TypNote: Typical Mitered Corners are Pro-vided with 23” x 23” Legs, But Can BeFactory-Cut to Any Size RequiredTypical 10’Straight LengthPittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON ARCHITECTURAL METALS, LLC

LC-6-PFSquare Corner Light Covewith RevealSAMPLE SPECIFICATIONSpecify as: PITTCON LIGHT COVEModel # LC-6-PFModel # LC-6-TFModel # LC-6-WMPerpendicular FinTangential FinWall MountingMaterial: Aluminum alloy.......3003 H-14 or equalFinish.............................Factory primedMetal thickness................. .090" typicalThe formed aluminum profile shall incorporate a continuousintegral fin for surface contact to conventionally installedgypsum drywall. The formed profile shall be primed withcorrosion-resistant primer compatible with joint compound,latex and enamel paints, and wall covering adhesives.Other materials and finishes are available with some restrictionsapplying, due to sconce and butt joint options. Contact factory oryour local Pittcon sales representative for details.Section LC-6-PFNo ScaleDr. Martin A. HewittDirector of MedicalandClinical ServicesAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON CUSTOM CORPORATIONLC-6

Fin OptionsLight Fixture By Others1"(25.4 mm)Tape andSpackleType LC-6-PF with Perpendicular FinTape and SpackleType LC-6-TF with Tangent Fin4-3/8" (111.1 mm)6" (152.4 mm)Wide BracketsProvided for Placementevery 3' O.C.3-1/2" (88.9 mm)This Light Cove is Availablewith an Optional SquareReveal or No Reveal at All.Consult Factory for Options.6-1/2" (165.1 mm) Minimum-Larger Sizes AvailableType LC-6-WM for Wall Mounting6-1/8" (155.6 mm) Minimum-Larger Sizes AvailableSection LC-6-PFNo ScaleJoint DetailsTape andSpackle infieldEnd Caps Loose orFactory WeldedSpecial OptionsWall Sconce OptionFactory Mitered CornersMax. 10'-0" (3.048 M) LengthFactory-MiteredInside Corner23”23”Factory-PreparedTaping Joints23”23”Transitions FromPF to TF at Bottomof SoffitFactory-Mitered Wall MountingOutside Corner Bracket InstalledEvery 3’ O.C. TypNote: Typical Mitered Corners are Pro-vided with 23” x 23” Legs, But Can BeFactory-Cut to Any Size RequiredTypical 10’Straight LengthPittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON ARCHITECTURAL METALS, LLC

LC-7-TFTriple Step Light Covewith RevealSAMPLE SPECIFICATIONSpecify as: PITTCON LIGHT COVEModel # LC-7-TFModel # LC-7-PFModel # LC-7-WMTangential FinPerpendicular FinWall MountingMaterial: Aluminum alloy.......3003 H-14 or equalFinish.............................Factory primedMetal thickness................. .090" typicalThe formed aluminum profile shall incorporate a continuousintegral fin for surface contact to conventionally installedgypsum drywall. The formed profile shall be primed withcorrosion-resistant primer compatible with joint compound,latex and enamel paints, and wall covering adhesives.Other materials and finishes are available with some restrictionsapplying, due to sconce and butt joint options. Contact factory oryour local Pittcon sales representative for details.Section LC-7-TFNo ScaleAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON CUSTOM CORPORATIONLC-7

Fin Options6" (152.4 mm) NominalLight Fixture By Others1"(25.4 mm)Type LC-7-PF with Perpendicular FinTape and SpackleType LC-7-TF with Tangent FinTape andSpackle4-3/8" (111.1 mm)6" (152.4 mm)Wide BracketsProvided for Placementevery 3' O.C.1/2" (12.7 mm)3-1/2" (88.9 mm)1/2"(12.7 mm)1/2"(12.7 mm)2" (50.8 mm) 2" (50.8 mm) 2" (50.8 mm)6" (152.4 mm) Minimum-Larger Sizes Available1/2"(12.7 mm)Type LC-7-WM for Wall MountingSection LC-7-TFNo ScaleJoint DetailsTape andSpackle infieldEnd Caps Loose orFactory WeldedSpecial OptionsWall Sconce OptionFactory Mitered CornersMax. 10'-0" (3.048 M) LengthFactory-MiteredInside Corner23”23”Factory-PreparedTaping Joints23”23”Transitions FromPF to TF at Bottomof SoffitFactory-MiteredOutside CornerWall MountingBracket InstalledEvery 3’ O.C. TypNote: Typical Mitered Corners are Pro-vided with 23” x 23” Legs, But Can BeFactory-Cut to Any Size RequiredTypical 10’Straight LengthPittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON ARCHITECTURAL METALS, LLC

LC-8-PFTriple Step Light CoveSAMPLE SPECIFICATIONSpecify as: PITTCON LIGHT COVEModel # LC-8-PFModel # LC-8-TFModel # LC-8-WMPerpendicular FinTangential FinWall MountingMaterial: Aluminum alloy.......3003 H-14 or equalFinish.............................Factory primedMetal thickness................. .090" typicalThe formed aluminum profile shall incorporate a continuousintegral fin for surface contact to conventionally installedgypsum drywall. The formed profile shall be primed withcorrosion-resistant primer compatible with joint compound,latex and enamel paints, and wall covering adhesives.Other materials and finishes are available with some restrictionsapplying, due to sconce and butt joint options. Contact factory oryour local Pittcon sales representative for details.Section LC-8-PFNo ScaleAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON CUSTOM CORPORATIONLC-8

Fin Options7-1/8" (181 mm) NominalLight Fixture By Others1"(25.4 mm)3-1/2" (88.9 mm)Type LC-8-PF with Perpendicular FinTape and SpackleType LC-8-TF with Tangent FinTape andSpackle4-3/8" (111.1 mm)6" (152.4 mm)Wide BracketsProvided forPlacementevery 3' O.C.2-3/8"(60.3 mm)Nominal7-1/8" (181 mm) Minimum-Larger Sizes AvailableType LC-8-WM for Wall MountingSection LC-8-PFNo ScaleJoint DetailsTape andSpackle infieldEnd Caps Loose orFactory WeldedSpecial OptionsWall Sconce OptionMax. 10'-0" (3.048 M) LengthFactory-MiteredInside CornerFactory Mitered Corners23” 23”Factory-PreparedTaping Joints23”Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon Industries23”Transitions FromPF to TF at Bottomof SoffitFactory-Mitered Wall MountingOutside Corner Bracket InstalledEvery 3’ O.C. TypNote: Typical Mitered Corners are Pro-vided with 23” x 23” Legs, But Can BeFactory-Cut to Any Size RequiredTypical 10’Straight LengthDIVISION OF PITTCON ARCHITECTURAL METALS, LLC

LC-9-PFTriple Step RadiusLight CoveSAMPLE SPECIFICATIONSpecify as: PITTCON LIGHT COVEModel # LC-9-PFModel # LC-9-TFModel # LC-9-WMPerpendicular FinTangential FinWall MountingMaterial: Aluminum alloy.......3003 H-14 or equalFinish.............................Factory primedMetal thickness................. .090" typicalThe formed aluminum profile shall incorporate a continuousintegral fin for surface contact to conventionally installedgypsum drywall. The formed profile shall be primed withcorrosion-resistant primer compatible with joint compound,latex and enamel paints, and wall covering adhesives.Other materials and finishes are available with some restrictionsapplying, due to sconce and butt joint options. Contact factory oryour local Pittcon sales representative for details.Section LC-9-PFNo ScaleAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON CUSTOM CORPORATIONLC-9

Fin Options6-1/2" (165.1 mm) NominalLight Fixture By Others1"(25.4 mm)Type LC-9-PF with Perpendicular FinType LC-9-TF with Tangent FinTape andSpackleTape and Spackle4-3/8" (111.1 mm)6" (152.4 mm)Wide BracketsProvided for Placementevery 3' O.C.1/2" R(12.7 mm)TYP3-1/2" (88.9 mm)1"(25.4 mm)1"(25.4 mm)2" (50.8 mm)2-1/2" (63.5 mm)2-1/2" (63.5 mm)7" (177.8 mm) Minimum-Larger Sizes AvailableType LC-9-WM for Wall MountingSection LC-9-PFNo ScaleJoint DetailsTape andSpackle infieldEnd Caps Loose orFactory WeldedSpecial OptionsWall Sconce OptionMax. 10'-0" (3.048 M) LengthFactory Mitered CornersFactory-MiteredInside Corner23”23”Factory-PreparedTaping Joints23”23”Transitions FromPF to TF at Bottomof SoffitWall MountingFactory-Mitered Bracket InstalledOutside Corner Every 3’ O.C. TypNote: Typical Mitered Corners are Pro-vided with 23” x 23” Legs, But Can BeFactory-Cut to Any Size RequiredTypical 10’Straight LengthPittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON ARCHITECTURAL METALS, LLC

LC-10-PFTriple Step CombinationLight CoveSAMPLE SPECIFICATIONSpecify as: PITTCON LIGHT COVEModel # LC-10-PFModel # LC-10-TFModel # LC-10-WMPerpendicular FinTangential FinWall MountingMaterial: Aluminum alloy.......3003 H-14 or equalFinish.............................Factory primedMetal thickness................. .090" typicalThe formed aluminum profile shall incorporate a continuousintegral fin for surface contact to conventionally installedgypsum drywall. The formed profile shall be primed withcorrosion-resistant primer compatible with joint compound,latex and enamel paints, and wall covering adhesives.Other materials and finishes are available with some restrictionsapplying, due to sconce and butt joint options. Contact factory oryour local Pittcon sales representative for details.Section LC-10-PFNo ScaleAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON CUSTOM CORPORATIONLC-10

Fin Options7-1/4" (184.2 mm) NominalLight Fixture By Others1"(25.4 mm)Tape andSpackleType LC-10-PF with Perpendicular FinTape and SpackleType LC-10-TF with Tangent Fin4-3/8" (111.1 mm)6" (152.4 mm) WideBrackets Provided forPlacement every 3' O.C.3-1/2" (88.9 mm)1/2" R(12.7 mm)TYP2" R(50.8 mm)TYP6-1/4" (158.8 mm) Minimum-Larger Sizes AvailableType LC-10-WM for Wall MountingSection LC-10-PFNo ScaleJoint DetailsTape andSpackle infieldEnd Caps Loose orFactory WeldedSpecial OptionsWall Sconce OptionMax. 10'-0" (3.048 M) LengthFactory Mitered CornersFactory-MiteredInside Corner23”23”Factory-PreparedTaping Joints23”Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon Industries23”Transitions FromPF to TF at Bottomof SoffitFactory-MiteredOutside CornerWall MountingBracket InstalledEvery 3’ O.C. TypNote: Typical Mitered Corners are Pro-vided with 23” x 23” Legs, But Can BeFactory-Cut to Any Size RequiredTypical 10’Straight LengthDIVISION OF PITTCON ARCHITECTURAL METALS, LLC

LC-11-PFTriple Step CombinationLight CoveSAMPLE SPECIFICATIONSpecify as: PITTCON LIGHT COVEModel # LC-11-PFModel # LC-11-TFModel # LC-11-WMPerpendicular FinTangential FinWall MountingMaterial: Aluminum alloy.......3003 H-14 or equalFinish.............................Factory primedMetal thickness................. .090" typicalThe formed aluminum profile shall incorporate a continuousintegral fin for surface contact to conventionally installedgypsum drywall. The formed profile shall be primed withcorrosion-resistant primer compatible with joint compound,latex and enamel paints, and wall covering adhesives.Other materials and finishes are available with some restrictionsapplying, due to sconce and butt joint options. Contact factory oryour local Pittcon sales representative for details.Section LC-11-PFNo ScaleAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON CUSTOM CORPORATIONLC-11

Fin Options7-3/4" (196.9 mm) NominalLight Fixture By Others1"(25.4 mm)Type LC-11-PF with Perpendicular FinType LC-11-TF with Tangent FinTape andSpackleTape and Spackle4-3/8" (111.1 mm)6" (152.4 mm)Wide BracketsProvided for Placementevery3' O.C.1" Radius(25.4 mm)Typical3-1/2" (88.9 mm)3" Center Radius(76.2 mm)Minimum6-3/4" (171.5 mm) Minimum-Larger Sizes AvailableType LC-11-WM for Wall MountingSection LC-11-PFNo ScaleJoint DetailsTape andSpackle infieldEnd Caps Loose orFactory WeldedSpecial OptionsWall Sconce OptionMax. 10'-0" (3.048 M) LengthFactory Mitered CornersFactory-MiteredInside Corner23”23”Factory-PreparedTaping Joints23”23”Transitions FromPF to TF at Bottomof SoffitWall MountingFactory-Mitered Bracket InstalledOutside Corner Every 3’ O.C. TypNote: Typical Mitered Corners are Pro-vided with 23” x 23” Legs, But Can BeFactory-Cut to Any Size RequiredTypical 10’Straight LengthPittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON ARCHITECTURAL METALS, LLC

LC-12-TF45° Face Light CoveSAMPLE SPECIFICATIONSpecify as: PITTCON LIGHT COVEModel # LC-12-TFModel # LC-12-PFModel # LC-12-WMTangential FinPerpendicular FinWall MountingMaterial: Aluminum alloy.......3003 H-14 or equalFinish.............................Factory primedMetal thickness................. .090" typicalThe formed aluminum profile shall incorporate a continuousintegral fin for surface contact to conventionally installedgypsum drywall. The formed profile shall be primed withcorrosion-resistant primer compatible with joint compound,latex and enamel paints, and wall covering adhesives.Other materials and finishes are available with some restrictionsapplying, due to sconce and butt joint options. Contact factory oryour local Pittcon sales representative for details.Section LC-12-TFNo ScaleAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON CUSTOM CORPORATIONLC-12

Fin Options8-5/8" (219.1 mm) NominalTape andSpackleLight Fixture By Others3-1/2" (88.9 mm)Type LC-12-PF with Perpendicular FinTape and SpackleType LC-12-TF with Tangent Fin4-3/8" (111.1 mm)45°4-7/8" (123.8 mm) MinimumLarger Sizes Available6" (152.4 mm) Wide Brackets Provided forPlacement every 3' O.C.Type LC-12-WM for Wall MountingSection LC-12-TFNo ScaleJoint DetailsEnd Caps Loose orFactory WeldedSpecial OptionsWall Sconce OptionTape andSpackle infieldMax. 10'-0" (3.048 M) LengthFactory-MiteredInside CornerFactory Mitered Corners23”23”Factory-PreparedTaping Joints23”23”Transitions FromPF to TF at Bottomof SoffitFactory-MiteredOutside CornerWall MountingBracket InstalledEvery 3’ O.C. TypNote: Typical Mitered Corners are Pro-vided with 23” x 23” Legs, But Can BeFactory-Cut to Any Size RequiredTypical 10’Straight LengthPittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON ARCHITECTURAL METALS, LLC

LC-13-PFTriple Step CombinationLight CoveSAMPLE SPECIFICATIONSpecify as: PITTCON LIGHT COVEModel # LC-13-PFModel # LC-13-TFModel # LC-13-WMPerpendicular FinTangential FinWall MountingMaterial: Aluminum alloy.......3003 H-14 or equalFinish.............................Factory primedMetal thickness................. .090" typicalThe formed aluminum profile shall incorporate a continuousintegral fin for surface contact to conventionally installedgypsum drywall. The formed profile shall be primed withcorrosion-resistant primer compatible with joint compound,latex and enamel paints, and wall covering adhesives.Other materials and finishes are available with some restrictionsapplying, due to sconce and butt joint options. Contact factory oryour local Pittcon sales representative for details.Section LC-13-PFNo ScaleAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON CUSTOM CORPORATIONLC-13

Fin Options6-3/4" (171.4 mm) NominalLight Fixture By OthersTape andSpackleType LC-13-PF with Perpendicular FinTape and SpackleType LC-13-TF with Tangent Fin4-3/8" (111.1 mm)6" (152.4 mm) Wide Brackets Providedfor Placement every 3' O.C.3-1/2" (88.9 mm)6-3/4" (171.4 mm) Minimum-Larger Sizes AvailableType LC-13-WM for Wall MountingSection LC-13-PFNo ScaleJoint DetailsTape andSpackle infieldEnd Caps Loose orFactory WeldedSpecial OptionsWall Sconce OptionFactory Mitered CornersMax. 10'-0" (3.048 M) LengthFactory-MiteredInside Corner23”23”Factory-PreparedTaping Joints23”23”Transitions FromPF to TF at Bottomof SoffitWall MountingFactory-Mitered Bracket InstalledOutside Corner Every 3’ O.C. TypTypical 10’Note: Typical Mitered Corners are Pro-Straight Lengthvided with 23” x 23” Legs, But Can BeFactory-Cut to Any Size RequiredPittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON ARCHITECTURAL METALS, LLC

LC-14-TFTriple Step CombinationLight CoveSAMPLE SPECIFICATIONSpecify as: PITTCON LIGHT COVEModel # LC-14-TFModel # LC-14-PFModel # LC-14-WMTangential FinPerpendicular FinWall MountingMaterial: Aluminum alloy.......3003 H-14 or equalFinish.............................Factory primedMetal thickness................. .090" typicalThe formed aluminum profile shall incorporate a continuousintegral fin for surface contact to conventionally installedgypsum drywall. The formed profile shall be primed withcorrosion-resistant primer compatible with joint compound,latex and enamel paints, and wall covering adhesives.Other materials and finishes are available with some restrictionsapplying, due to sconce and butt joint options. Contact factory oryour local Pittcon sales representative for details.Section LC-14-TFNo ScaleAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON CUSTOM CORPORATIONLC-14

Fin Options7-5/8" (193.7 mm) NominalLight Fixture By Others1"(25.4 mm)2" (50.8 mm)Tape andSpackleType LC-14-PF with Perpendicular FinTape and SpackleType LC-14-TF with Tangent Fin4-3/8" (111.1 mm)6" (152.4 mm)Wide BracketsProvided for Placementevery 3' O.C.1" R(25.4 mm)TYP3-1/2" (88.9 mm)3/4"(19 mm)Min2" R(50.8 mm)TYP6-1/2" (165.1 mm) Minimum-Larger Sizes AvailableType LC-14-WM for Wall MountingSection LC-14-TFNo ScaleJoint DetailsEnd Caps Loose orFactory WeldedSpecial OptionsWall Sconce OptionTape andSpackle infieldFactory Mitered CornersMax. 10'-0" (3.048 M) LengthFactory-MiteredInside Corner23”23”Factory-PreparedTaping Joints23”23”Transitions FromPF to TF at Bottomof SoffitWall MountingFactory-Mitered Bracket InstalledOutside Corner Every 3’ O.C. TypNote: Typical Mitered Corners are Pro-vided with 23” x 23” Legs, But Can BeFactory-Cut to Any Size RequiredTypical 10’Straight LengthPittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON ARCHITECTURAL METALS, LLC

LC-15-PFDual Radius Light CoveSAMPLE SPECIFICATIONSpecify as: PITTCON LIGHT COVEModel # LC-15-PFModel # LC-15-TFModel # LC-15-WMPerpendicular FinTangential FinWall MountingMaterial: Aluminum alloy.......3003 H-14 or equalFinish.............................Factory primedMetal thickness................. .090" typicalThe formed aluminum profile shall incorporate a continuousintegral fin for surface contact to conventionally installedgypsum drywall. The formed profile shall be primed withcorrosion-resistant primer compatible with joint compound,latex and enamel paints, and wall covering adhesives.Other materials and finishes are available with some restrictionsapplying, due to sconce and butt joint options. Contact factory oryour local Pittcon sales representative for details.Section LC-15-PFNo ScaleAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON CUSTOM CORPORATIONLC-15

Fin OptionsLight Fixture By OthersTape andSpackleType LC-15-PF with Perpendicular FinTape and SpackleType LC-15-TF with Tangent Fin3-1/2" (88.9 mm) Min.6" (152.4 mm)Wide BracketsProvided for Placementevery 3' O.C.6" (152.4 mm)Radius Minimum(Larger SizesAvailable)1"(25.4 mm)12" (304.8 mm) MinimumLarger Sizes AvailableType LC-15-WM for Wall MountingSection LC-15-PFNo ScaleJoint DetailsTape andSpackle infieldEnd Caps Loose orFactory WeldedSpecial OptionsWall Sconce OptionFactory Mitered CornersMax. 10'-0" (3.048 M) LengthFactory-MiteredInside Corner23”23”Factory-PreparedTaping Joints23”23”Transitions FromPF to TF at Bottomof SoffitFactory-MiteredOutside CornerNote: Typical Mitered Corners are Pro-vided with 23” x 23” Legs, But Can BeFactory-Cut to Any Size RequiredWall MountingBracket InstalledEvery 3’ O.C. TypTypical 10’Straight LengthPittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON ARCHITECTURAL METALS, LLC

LC-16-PFTriple Step CombinationLight CoveSAMPLE SPECIFICATIONSpecify as: PITTCON LIGHT COVEModel # LC-16-TFModel # LC-16-PFModel # LC-16-WMTangential FinPerpendicular FinWall MountingMaterial: Aluminum alloy.......3003 H-14 or equalFinish.............................Factory primedMetal thickness................. .090" typicalThe formed aluminum profile shall incorporate a continuousintegral fin for surface contact to conventionally installedgypsum drywall. The formed profile shall be primed withcorrosion-resistant primer compatible with joint compound,latex and enamel paints, and wall covering adhesives.Other materials and finishes are available with some restrictionsapplying, due to sconce and butt joint options. Contact factory oryour local Pittcon sales representative for details.Section LC-16-PFNo ScaleAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON CUSTOM CORPORATIONLC-16

7-3/8" (187.3 mm) NominalFin OptionsLight Fixture By Others1"(25.4 mm)Tape andSpackleType LC-16-PF with Perpendicular FinTape and SpackleType LC-16-TF with Tangent Fin4-3/8" (111.1 mm)6" (152.4 mm) WideBrackets Provided forPlacement every 3' O.C.1" R(25.4 mm)Typ3-1/2" (88.9 mm)3" R(76.2 mm)Typ6" (152.4 mm) Minimum-Larger Sizes AvailableType LC-16-WM for Wall MountingSection LC-16-PFNo ScaleJoint DetailsEnd Caps Loose orFactory WeldedSpecial OptionsWall Sconce OptionTape andSpackle infieldFactory Mitered CornersMax. 10'-0" (3.048 M) LengthFactory-MiteredInside CornerFactory-MiteredOutside Corner23”23”Factory-PreparedTaping Joints23”23”Transitions FromPF to TF at Bottomof SoffitNote: Typical Mitered Corners are Pro-vided with 23” x 23” Legs, But Can BeFactory-Cut to Any Size RequiredTypical 10’Straight LengthPittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON ARCHITECTURAL METALS, LLC

LC-17-PFTriple Step CombinationLight CoveSAMPLE SPECIFICATIONSpecify as: PITTCON LIGHT COVEModel # LC-17-TFModel # LC-17-PFModel # LC-17-WMTangential FinPerpendicular FinWall MountingMaterial: Aluminum alloy.......3003 H-14 or equalFinish.............................Factory primedMetal thickness................. .090" typicalThe formed aluminum profile shall incorporate a continuousintegral fin for surface contact to conventionally installedgypsum drywall. The formed profile shall be primed withcorrosion-resistant primer compatible with joint compound,latex and enamel paints, and wall covering adhesives.Other materials and finishes are available with some restrictionsapplying, due to sconce and butt joint options. Contact factory oryour local Pittcon sales representative for details.Section LC-17-PFNo ScaleAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON CUSTOM CORPORATIONLC-17

Fin Options7-1/2" (190.5 mm) NominalLight Fixture By Others1"(25.4 mm)1"Tape andSpackleType LC-17-PF with Perpendicular FinTape and SpackleType LC-17-TF with Tangent Fin4-3/8" (111.1 mm)6" (152.4 mm) WideBrackets Provided forPlacementevery 3' O.C.3-1/2" (88.9 mm)3" (76.2 mm)Radius Minimum(Larger SizesAvailable)6-1/2" (165.1 mm) MinimumLarger Sizes Available1/2" Radius(12.7 mm)TypType LC-17-WM for Wall MountingSection LC-17-PFNo ScaleJoint DetailsEnd Caps Loose orFactory WeldedSpecial OptionsWall Sconce OptionTape andSpackle infieldMax. 10'-0" (3.048 M) LengthFactory Mitered CornersFactory-MiteredInside CornerFactory-MiteredOutside Corner23”23”Factory-PreparedTaping Joints23”23”Transitions FromPF to TF at Bottomof SoffitNote: Typical Mitered Corners are Pro-vided with 23” x 23” Legs, But Can BeFactory-Cut to Any Size RequiredWall MountingBracket InstalledEvery 3’ O.C. TypTypical 10’Straight LengthPittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON ARCHITECTURAL METALS, LLC

LC-20-TFSlope-Faced Light CoveStandard Catalog ProfileSAMPLE SPECIFICATIONSpecify as: PITTCON LIGHT COVEModel # LC-20-TFModel # LC-20-PFModel # LC-20-WMTangential FinPerpendicular FinWall MountingMaterial: Aluminum alloy.......3003 H-14 or equalFinish.............................Factory primedMetal thickness................. .090" typicalThe formed aluminum profile shall incorporate a continuousintegral fin for surface contact to conventionally installedgypsum drywall. The formed profile shall be primed withcorrosion-resistant primer compatible with joint compound,latex and enamel paints, and wall covering adhesives.Other materials and finishes are available with some restrictionsapplying, due to sconce and butt joint options. Contact factory oryour local Pittcon sales representative for details.Section LC-20-TFNo ScaleAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON CUSTOM CORPORATIONLC-20

Fin OptionsLight FixtureBy OthersTape andSpackleType LC-20-PF with Perpendicular Fin4-1/4" (108 mm) Standard Height(Other Heights Available)Tape and SpackleType LC-20-TF with Tangent Fin45 07/8"(22.2 mm)2-5/8" (66.7 mm)(Other Widths Available)Type LC-20-WM for Wall MountingSection LC-20-TFNo ScaleJoint DetailsTape andSpackle infieldEnd Caps Loose orFactory WeldedSpecial OptionsWall Sconce OptionMax. 10'-0" (3.048 M) LengthFactory-MiteredInside CornerFactory Mitered Corners23” 23”Factory-PreparedTaping Joints23”23”Transitions FromTF to PF at Faceof PilasterFactory-MiteredOutside CornerNote: Typical Mitered Corners are Pro-vided with 23” x 23” Legs, But Can BeFactory-Cut to Any Size RequiredTypical 10’Straight LengthPittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2007 Pittcon IndustriesDIVISION OF PITTCON ARCHITECTURAL METALS, LLC

LC-21-TFSlope-Faced Light CoveStandard Catalog ProfileSAMPLE SPECIFICATIONSpecify as: PITTCON LIGHT COVEModel # LC-21-TFModel # LC-21-PFTangential FinPerpendicular FinMaterial: Aluminum alloy.......3003 H-14 or equalFinish.............................Factory primedMetal thickness................. .090" typical45 0The formed aluminum profile shall incorporate a continuousintegral fin for surface contact to conventionally installedgypsum drywall. The formed profile shall be primed withcorrosion-resistant primer compatible with joint compound,latex and enamel paints, and wall covering adhesives.Other materials and finishes are available with some restrictionsapplying, due to sconce and butt joint options. Contact factory oryour local Pittcon sales representative for details.Section LC-21-TFNo ScaleAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesDIVISION OF PITTCON CUSTOM CORPORATIONLC-21

Fin OptionsTape andSpackle1-7/8"(47.6 mm)5/8" GPDW(by Others)Tape andSpackleType LC-21-PF with Perpendicular FinTape and SpackleType LC-21-TF with Tangent Fin3-5/8" Metal Studs(by Others)45 04-7/8" (123.8 mm) Standard Height(Other Heights Available)Tape andSpackle7/8"(22.2 mm)3" (76.2 mm)(Other Widths Available)Joint DetailsTape andSpackle infieldEnd Caps Loose orFactory WeldedSection LC-21-TFNo ScaleSpecial OptionsWall Sconce OptionFactory Mitered CornersMax. 10'-0" (3.048 M) LengthFactory-MiteredInside Corner23”23”Factory-PreparedTaping Joints23”23”Transitions FromTF to PF at Faceof PilasterFactory-MiteredOutside CornerNote: Typical Mitered Corners are Pro-vided with 23” x 23” Legs, But Can BeFactory-Cut to Any Size RequiredTypical 10’Straight LengthPittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2007 Pittcon IndustriesDIVISION OF PITTCON ARCHITECTURAL METALS, LLC

If You Don't Find What You NeedThis page allows the architect or interior designer to design their own customLight Cove. Using the template below, simply sketch in the design concept thatyou would like to develop, and then forward the design to us for review. Whenmaking your design, please keep in mind the conventions shown here on thispage, and on the preceding pages.NameFirmMailing AddressCity State ZipPhone ( )Fax ( )ArchitectInterior DesignerProject Name and Location:ContractorManufacturerLineal Footage RequiredDateTape andSpackleType LC-PF with Perpendicular FinTape and SpackleType LC-TF with Tangent FinType LC-WM for Wall MountingAll details, methods and specifications are the exclusive property of Pittcon Industries, Division ofPittcon Custom Corporation. Pittcon reserves the right to change any specifications or details withoutprior notification. All Light Cove profiles are available in standard 10' lengths ±1/8" (2.048 M). Otherlengths are available as special order items. For custom shapes, sizes, or for special finishes, pleasecontact the factory or your nearest Pittcon sales representative.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesSketch Your Light CoveDesign Idea HereDIVISION OF PITTCON CUSTOM CORPORATIONLC-21

Series LC Light CoveSpecificationsSection 05700 Ornamental Metal FabricationsJob Name:SPECIFICATIONPart 1 - General1.01 Description of workA. Furnish all material necessary for a complete installation of the SERIES LC Light Cove system, exclusiveof any field applied materials such as joint compound and tape, paint, etc. Light Coves shall incorporate a selfaligningbackplate at joints, without exposed fasteners or supports.1.02 SubmittalsA. Submit complete shop drawings detailing quantities, sizes, finish, configurations, and attachment methods.B. Submit product literature, specifications, information, and installation instructions.1.03 Quality AssuranceA. Manufacturer to have a minimum of ten years experience in the manufacturing of ornamental metalfabrications.B. Manufacturer to inspect all aspects of the product to ensure that specifications have been met, and thatthey comply with approved shop drawings.C. Manufacturer shall issue a one year limited warranty ensuring product against defects in workmanship andmaterials.Part 2 - Products2.01 Acceptable Manufacturers:Pittcon IndustriesPittcon Industries6409 Rhode Island Ave. 3330 W. Flower StreetRiverdale, MD 20737 Phoenix, Arizona 850172.02 MaterialsA. Light Coves shall be formed from .080" aluminum with factory primed finish to match architects sample.B. All fasteners are to be concealed.C. All support brackets to be supplied by Light Cove manufacturer with allowance for spacing of ± 3' intervals.2.03 FabricationA. Light Coves shall be formed to specific dimensions and tolerances, and accurately formed to radii shownon drawings.B. Light Coves shall be fabricated in individually divided sections attached with a (specify taping or butt) joint.C. Light Coves shall be fabricated in single length units of 10' where required, with factory mitered corners asnecessary.Part 3 - Execution3.01 Inspection & InstallationA. Contractor to inspect Light Coves upon receipt to ensure that no damage has occurred during shipment.B. Light Coves to be correctly oriented and installed in accordance with manufacturer's shop drawings andinstallation instructions to ensure proper installation.C. Light Coves to be erected plumb and level.3.02 Cleaning & ProtectionA. Contractor to remove any protective material supplied by Light Coves manufacturer.B. Contractor to clean all visible surfaces after installation.C. Contractor to protect Light Coves from damage by other trades.Pittcon Industries Division Pittcon Architectural Metals, LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, Maryland 20737 Phoenix, Arizona 85017(800) 637-7638 , (301) 927-1000 (800) 637-7638 , (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400c 2008 Pittcon IndustriesFabricated with Pride inRiverdale, Maryland-U.S.A.

FloridaThomas SchreiberMiami, IwSales Representativetom@dcs-sales.com(407) 648-5348 Phone(407) 505-4336 Faxwww.dcs-sales.com8805 Tamiami Trail North, Suite 107Naples, FL 34108Puerto Rico, US Virgin Islands - CaribbeanIsland groups-Lucayan ArchipelagoGreater Antilles, Lesser Antilles, Bahamas