13.07.2015 Views

AquaBuOY scale 1:10 - Energinet.dk

AquaBuOY scale 1:10 - Energinet.dk

AquaBuOY scale 1:10 - Energinet.dk

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Choice of end-stop solution the by-pass sectionThe bypass mechanism was invented by IPS to avoid overload on the linear power take-off in case thecenter piston moved outside its working area. The by-pass solution consisted of a working area for the pistonwith a slightly smaller diameter compared to the tube diameter. In case the piston moved out the workingarea water could flow pass the piston and reduce the end-stop loads. The construction parts are shown inthe photo below and the assembled section below. The piston is attached to a central guide-rod. This designturned out to take up quite a lot of length in the tube – and a different was developed for the half <strong>scale</strong>prototype.The piston (black) in its working area just beneath the by pass area.6

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!