CCSDS 734.2-R-1, CCSDS Bundle Protocol Specification (Red ...
CCSDS 734.2-R-1, CCSDS Bundle Protocol Specification (Red ...
CCSDS 734.2-R-1, CCSDS Bundle Protocol Specification (Red ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DRAFT <strong>CCSDS</strong> RECOMMENDED STANDARD FOR <strong>CCSDS</strong> BUNDLE PROTOCOL SPECIFICATIOND3.3.1 Either of the predicate forms may identify a protocol feature, or a Booleancombination of predicates. (‘^’ is the symbol for logical negation, ‘|’ is the symbol for logicalOR, and ‘&’ is the symbol for logical AND.)D3.4 The following notations shall be used in the ‘<strong>Protocol</strong> Feature’ column.Table D-3: Symbols for PICS ‘<strong>Protocol</strong> Feature’ ColumnSymbolMeaningDenotes the receiving system.Denotes the transmitting system.D3.5 The following symbols shall be used in the ‘Support’ column of the PICS.Table D-4: Symbols for PICS ‘Support’ ColumnSymbolYNN/AMeaningYes, the feature is supported by the implementation.No, the feature is not supported by the implementation.The item is not applicable.D4REFERENCED BASE STANDARDSD4.1 The base standards referenced in the PRL shall be:a) <strong>CCSDS</strong> BP (this document);b) RFC 5050 (reference [1]).D4.2 In the tables below, the notation in the Reference column combines one of the shortformdocument identifiers above (e.g., <strong>CCSDS</strong>-BP) with applicable subsection numbers inthe referenced document. RFC numbers are used to facilitate reference to subsections withinthe Internet specifications.<strong>CCSDS</strong> <strong>734.2</strong>-R-1 Page D-3 February 2012