RC 6340 - WebShop - Rhein Chemie

Technical Data SheetAdditin ® RC 6340 Antiwear AdditiveTypeAshless EP, antiwear and antioxidant additiveTechnical data*ApplicationCompositionAppearanceNitrogenSulphurViscosity, 40°C (ASTM-D 445)Density, 20°C (ASTM-D 1298)Flash point, COC (ASTM-D 92)Mineral oil content- heavy metal-free EP greases- industrial gear oils- hydraulic fluids- metal - working fluidsmethylene-bis-dibutyldithiocarbamateyellow, medium viscosity liquidapprox. 6.5 % weightapprox. 30 % weightapprox. 360 mm²/sapprox. 1060 kg/m³approx. 200°CnoneAdditin® RC 6340 is an ashless additive with multifunctional properties, i.e. itcan be used as an EP, antiwear and antioxidant additive.Additin® RC 6340 is ideally suited for formulating heavy metal-free EP greases.Additionally, it can be used as an antiwear/antioxidant component for hydraulicfluids and industrial gear oils.The combination of Additin® RC 6340 with inactive sulphur carriers, e.g.Additin® RC 2410 or zinc dithiophosphates, e.g. Additin® RC 3180 andanticorrosionadditives, e.g. Additin® 4220 assists in achieving optimum performance ofhydraulic fluids and industrial gear oils as well as EP greases.Additin® RC 6340 is in compliance with § 178.3570 according to U.S. Food andDrug administration regulations (lubricants with incidental food contact).This product is acceptable as a lubricant where there is no possibility of foodcontact (H2) in and around food processing areas. Such compounds may beused as lubricants, release agents, or antirust films on equipment and machineparts in locations in which there is no possibility of the lubricant or lubricatedpart contacting edible products.This product is acceptable as an ingredient for use in lubricants with incidentalfood contact (HX-1) for use in and around food processing areas. Theregistration of Additin® RC 6340 is for the use as an additive only in lubricantsat a level not to exceed 0,5 % percent by weight.Additin RC 6340 Version: 3/18. Jul 20121 / 3

Such compounds may be used on food processing equipment as a protectiveanti-rust film, as a release agent on gaskets or seals of tank closures, and as alubricant for machine parts and equipment in locations in which there is apotential exposure of the lubricated part to food. The amount used should bethe minimum required to accomplish the desired technical effect on theequipment. If used as an anti-rust film, the compound must be removed fromthe equipment surface by washing or wiping, as required to leave the surfaceeffectively free of any substance which could be transferred to food beingprocessed.Additin® RC 6340 is acceptable as an ingredient for use in lubrcants with nofood contact (HX-2). Such compounds may be used as lubricants, releaseagents, or antirust films on equipment and machine parts in locations wherethere is no possibility of the lubricant or lubricated part contacting edibleproducts.Formulations containing NSF Registered ingredients are not considered to beNSF Registered products (e.g. H1 or H2 lubricants). A separate application isrequired for each final product. If you would like to apply for a NSF Registrationof your lubricant you need only identify our trade name Additin® RC 6340, theNSF Registration Number 141854 and concentration within the finished producton the application form.SolubilityTest resultsPacking unitStorage conditionsHandlingSoluble in mineral oils and synthetic base oils. However, it is necessary toverify the solubility in the base oils used and the compatibility with otheradditives.Test results see Technical Report209 kg bunghole drumsin a dry place at recommended temperature approx. 12 months. A storagetemperature of approx. 40 to 50°C is recommended.Consult material safety data sheet (MSDS) for additional handling informationfor Additin® RC 6340.® = registered trade mark* The analytical data are guide values.Additin RC 6340 is on EINECS and TSCA inventory.Version: 3/18. Jul 2012Our technical advice - whether verbal, inwriting or by way of trials - is given in goodfaith but without warranty, and this alsoapplies where proprietary rights of thirdparties are involved. It does not release youfrom the obligation to test theproducts supplied by us as to their suitabilityfor the intended processes and uses. Theapplication, use and processing of theproducts are beyond our control and,therefore, enti- rely your own responsibility.Should, in spite of this,liability be established for any damage, itwill be limited to the value of the goodsdelivered by us and used by you. We will, ofcourse, provide products of consistentquality within the scope of our GeneralConditions of Sale and Delivery.Additin RC 6340 Version: 3/18. Jul 20122 / 3

Rhein Chemie Rheinau GmbHDuesseldorfer Strasse 23-2768219 Mannheim, GermanyTel.: +49-621-8907-0Fax: +49-621-8907-675E-Mail: loa.info@rheinchemie.comwww.rheinchemie.comAdditin RC 6340 Version: 3/18. Jul 20123 / 3