Brochure for download - Ammann Group

More documents

Recommendations

Info

Road Paver Tracked - WheeledAFT 350 E/G - AFW 350 E/GThe machines of this class are ideal for small and medium sized job sites wheregood manoeuvrability for operating in restricted environments is requisite.Despite their compact dimensions these machines are able to pave in a width ofup to 4.5 m. The tracked version is suitable for job sites on difficult ground andensures a very thorough levelling effect.The wheeled machine has three axles: in the front, two axles for steeringand in the rear, the axle for traction. The rear axle is fitted with largepneumatic tyres so that the machine can also be driven on soft ground.Large full rubber tyres are fitted to the front oscillating axles. The steeringsystem with the hydraulic pump provides smooth control when turning.The tracked machine has rubber pads and an automatic tensioningdevice system with a grease accumulator. The hydrostatic transmissionis implemented by two variable flow-rate pumps that feed two motorswith two displacements directly attached to the planetary gearboxes thatoperate the tracks. An electronic and proportional control mounted oneach pump provides a progressive start and stop and maintains the setspeed constant. The steering-wheel is electronically controlled; the speedremains constant when steering. The hoppers are independently controlledby means of an electro-hydraulic system. The front pushing rollers move insequence with the hoppers. The two adjustable seats, left and right, canslide externally. The dashboard is adjustable in accordance with the seatposition to ensure ease of operation. There are ground controls with antivandalguards for the road operator. A hydraulic foldable canopy with rearsupports ensures good visibility.4
Technical specificationsFeeding of materialThe feeding system for the material is carried out by twoindependent reverse chain belt conveyors and augerscontrolled by paddle microswitches which regulate the flowof material to the screed in order to maintain the mosteffective distribution of material under any conditions.The height of the augers is electro-hydraulically adjustable.Screed optionsVibrating screed (FSV) or screed with tamper andvibration (FST) equipped with gas or electric heating,automatic lighting and temperature control, the ISR system(Screed Assist) with pressure adjustment.Max paving widths:FSV 355 E/GFST 350 E/G1830–3550 mmOptional 4130 mm1830–3500 mmOptional 4080–4500 mmApplicationslayers of final wearing course, binder,tout-venant on:national and municipal roadslarge squaressport grounds and courtyardsbuilding lots and parking areasEquipmentStandardAutomatic heating controlHydraulically adjustable auger heightThe ISR system (Screed Assist)Hydraulic folding canopyOptionalFour wheel drive (DT) for AFWLongitudinal levelling systemSlope control systemReduction plates at 800 mmMechanical extensions 2x290 mmMechanical extensions 2x500 mm for FSTProportional ultrasonic augers controlElectro-hydraulic camber adjustmentTracked Paver AFT 350 E/GWheeled Paver AFW 350 E/GWeight kg 7500 7500Diesel engine Deutz TD2011L04i / kW 52 (70 HP) at 2300 rpm Deutz TD2011L04i / kW 52 (70 HP) at 2300 rpmPaving width mm 1830 – 3500 (FST) 1830 – 3500 (FST)Max paving width mm 4500 (FST) 4500 (FST)Production t/h 230 2305
Page 2 and 3: Road Paver Tracked - WheeledAFT 270
Page 7 and 8: Screed versions and specificationsF
Page 9: 1300 mmAFW 150mm2730 mmAFW / T 270m
Page 13 and 14: Technical SpecificationsFeeding of
Page 15 and 16: This drawing is neither a lowed to

Brochure for download - Ammann Group

Create successful ePaper yourself

Delete template?

Save as template?