EQ5 Series Brochure - TECO-Westinghouse Motor Company

Constant 8. Specifications Torque8-1 Standard SpecificationsEQ5 AC Drive Operations Manual OutputratingsInput ratingsInput ratingsEQ5 CT (Constant Torque) – 230V SeriesType NEMA 1 PROTECTED CHASSISApplied MotorNominal (HP)ModelEQ5-2XXX-XXOutputratingsInput ratings0.25 0.5 1 2 3 5 5 7.5 10 15 20 25 30 30 40 50 60 75 100 1250P2-N10P5-N1001-N1002-N1003-N1005-N1007-N1010-N1015-N1Rated outputcapacity [kVA] (*1)0.6 1.2 2.0 3.2 4.4 6.8 6.8 10 13 18 24 29 35 35 46 58 72 86 113 138Rated outputcurrent [A] (*2)1.5 3.0 5.0 8.0 11 17 17 25 33 46 59 74 87 87 115 145 180 215 283 346Overloadcapability150% of rated output current for 1 min.200% of rated output current for 0.5 s150% of rated output current for 1 min.180% of rated output current for 0.5 sStarting torque minimum 200% (torque vector control mode) minimum 180% (torque vector control mode)Rated outputvoltage [V] (*3)Rated outputfrequency [Hz]Phases, voltage,frequencyVoltage/frequencyvariationsMomentary voltagedip capability (*6)Required powersupply capacity[kVA] (*7)3-phase, 200V/50Hz, 200V,220V,230V/60Hz50,60Hz3-phase,200 to 230V, 50/60Hz3-phase, 200 to 230V, 50/60HzVoltage: +10% to -15% (Imbalance rate between phases: 2% or less) (*5) , Frequency: +5% to -5%EQ5 CT (Constant Torque) – 460V SeriesEQ5 AC Drive Operations ManualApplied Motor0.25 0.5 1 2 3 5 7.5 10 15 20 25 30 30 40 50 60 75Nominal (HP) Type NEMA 1 PROTECTED CHASSIS100 125 150Applied Model Motor0P2 0P5 001 002 003 005 007 010 015 020 025 030 032 040 050 060 075 100 125 1500.5 1 2 3 5 5 7.5 10 15 20 25 30 30 40 50 60 75 100 125 150 200 250 300 350 350 400 450 500 600Nominal EQ5-2XXX-XX(HP)-N1 -N1 -N1 -N1 -N1 -N1 -N1 -N1 -N1 -N1 -N1 -N1 -N1 -C -C -C -C -C -C -CRated Model output 0P50.60011.20022.0003 0053.20074.4010 0156.80208.8025 030120321704022050 0602707531100 1253515046200 2505830072350 40086450113500 600138700 800165capacity EQ5-4XXX-XX [kVA] (*1) -N1 -N1 -N1 -N1 -N1 -N1 -N1 -N1 -N1 -N1 -N1 -N1 -C -C -C -C -C -C -C -C -C -C -C -C -C -C -C -C -CRated Rated output outputcurrent capacity [A][kVA] (*2) (*1)1.5 1.2 2.03.02.9 5.0 4.4 7.2 8.0 7.2 1110 14 17 192224 29 31 3642 36 5548 60 68 7380 89 87 120 140 115167 202 145 242 180 300 215 331 331283 414 466 346518 590 415Overload Rated outputcapability current [A] (*2)110% 1.5 2.5 of rated 3.7 output 5.5 9 current 9 for 131 min. 18 24 30 39 45 45 60 75 91 112 150 176 210 253 304 377 415 415 520 585 650 740Starting Overload torque 150% of rated output current for 1 min.150% 50% of rated or more output current for 1 min.Rated capability output 200% of rated output current for 0.5 s180% of rated output current for 0.5 s3-phase, 200V/50Hz, 200V,220V,230V/60Hzvoltage Starting [V] torque (*3) minimum 200% (torque vector control mode) minimum 180% (torque vector control mode)Rated Rated output outputfrequency Voltage [V] [Hz] (*3)50,60Hz 3-phase, 380V, 400V, 415V(440V)/50Hz, 380V, 400V, 440V, 460V/60HzPhases, Rated output voltage,frequency[Hz]350,60Hz-phase, 200 to 230V, 50/60Hz3-phase, 200 to 230V, 50/60HzVoltage/frequencyPhases, voltage,Voltage: 3-phase,380 +10% to to 480V,50/60Hz -15% (Imbalance rate between phases: 2% 3-phase, or less) 380 (*5) , to Frequency: 440V, 50/60Hz +5% to (*5) -5%variations frequencyMomentary Voltage/frequency voltage Operation will continue with 165V or more. If voltage drops below 165V, operation will continue for up to 15 ms.dipVoltage: +10% to -15% (Imbalance rate between phases: 2% or less) (*5) , Frequency: +5% to -5%variations capability (*6) If "Continuous operation" is selected, the output frequency will be lowered to withstand the load until normal voltage is resumed.Required Momentary powerOperation will continue with 310V or more. If voltage drops below 310V, operation will continue for up to 15 ms.supply voltage capacity dip 0.4If "Continuous0.7 1.3operation"2.2is3.1selected,5the7.2output9.7frequency15will20be lowered24to29withstand29the load38until47normal56voltage69is resumed.93[kVA] capability (*7) (*6)111 139Required powersupply capacity 0.7 1.2 2.2 3.1 5.0 5.0 7.2 9.7 15 20 24 29 29 38 47 57 70 93 111 136 161 196 244 267 267 341 383 433 488[kVA] (*7)OutputratingsNotes:(*1) Indicated capacities are at the rated output voltage 230V for the 230V series and 460V for the 460V series. The rated capacity will be loweredif the _________________________________________________________________________supply voltage is lower.EQ5 VT (Variable Torque) – 460V Series(*2) In TECO the case of – a Westinghouse low impedance load, Motor such as Company a high-frequency motor, the current may drop below the rated value.Type NEMA 1Standard Specifications Notes con’t 104PROTECTED CHASSIS(*3) The output voltage cannot exceed the input supply voltage.(*4) Applied The Motor taps within the inverter 0.5 1 must 2 be 3 changed 5 7.5 for 10 an input 15 20 power 25 supply 30 30rated 40 at 50 380 to 60 398V/50 75 100Hz 125 or 380 150to 200 30V/60 250 300 Hz. 350 400 450 500 600 700 800(*5) Nominal If the (HP) imbalance between phases exceeds 2%, use a power-factor correcting DC reactor(DCR). Please refer to the equation on the next page.(*6) The Model test was conducted 0P5 under 001 002 the 003 standard 005 007 load 010 conditions 015 020stipulated 025 030 by 032the 040 JEMA 050committee 060 075 100 (at the 125load 150 equivalent 200 250 300 to 85% 350 of 400 the 450 500 600 700 800nominal EQ5-4XXX-XX applied motor -N1 hp). -N1 -N1 -N1 -N1 -N1 -N1 -N1 -N1 -N1 -N1 -N1 -C -C -C -C -C -C -C -C -C -C -C -C -C -C -C -C -C(*7) Indicates Rated output the values required 1.2 2.0 when 2.9 4.4 using 7.2 a power 10 13 factor 18 correcting 24 29 35 DC reactor 36 48 (DCR) 60 with 73 a 89loaded 120 140 nominal 167 202 applied 242 motor 300 331 386 414 518 590 669 765(optional capacity [kVA] for inverters (*1) of 75 hp/CT, 100 hp/VT or less).Rated output1.5 2.5 3.7 5.5 9 12.5 16.5 23 30 37 44 45 60 75 91 112 150 176 210 253 304 377 415 485 520 650 740 840 960current [A] (*2)020-N1Operation will continue with 165V or more. If voltage drops below 165V, operation will continue for up to 15 ms.If "Continuous operation" is selected, the output frequency will be lowered to withstand the load until normal voltage is resumed.025-N10.4 0.7 1.3 2.2 3.1 5 5 7.2 9.7 15 20 24 29 29 38 47 56 69 93 111030-N1032-N1EQ5 VT (Variable Torque) – 230V SeriesType NEMA 1 PROTECTED CHASSIS*See notes 1 - 7 on the next pages.040-C050-C060-C075-C100-C125-C150-C