P-430 NAT 2-Mil PTFE COATED TAPE Features Chemically inert ...

http://www.permacel.com/files/ProductDetails.aspx?PId=105&CatId=54Page 1 of 26/2/2009P-430 NAT2-Mil PTFE COATED TAPEGray, Acrylic Adhesive, 11.5 kV, 155°CP-430 has an aggressive solvent-resistance acrylic adhesive that offers superior adhesion levels to mostsurfaces. It also has excellent Freon resistance and outstanding conformability.Features• Chemically inert.• Offers even and smooth unwind. Easy to dispense and easy to use.• Superior adhesion - quick-grabs surfaces damp or with a film of water on them, and isespecially effective on steel surfaces.• Excellent solvent and fuel resistance.• Strips cleanly and easily; leaves no adhesive residue.• Prevents abrasion, rubbing, squeaking or wearing of adjacent metallic, ceramic or plasticmaterials.• Provides outstanding conformability when used on curved or irregular surfaces.• Class 155° C electrical tape.Product ConstructionPTFE FilmAdhesive LayerApplication• Highly versatile PTFE tape engineered primarily for anti-friction masking, flashing, releaseand separator applications - wherever a clean, slick surface is required to speed up themovement of materials and/or reduce equipment wear.• Ideal as a liner for chutes and rails to prevent powder build-up or jamming of parts orpackages. Used as a high temperature release film on heat sealer bars and rolls, as flashing tapein the air-craft industry, for wrapping hangers that convey products thru paint or coatingsolutions and as a separator tape to prevent electrolytic corrosion of dissimilar metals.Properties

http://www.permacel.com/files/ProductDetails.aspx?PId=105&CatId=54Page 2 of 26/2/2009Backing materialPTFE FilmAdhesiveAcrylic, solvent resistantColorGrayImperialMetricInsulation Class 311°F 155°CTotal Tape Thickness 3.5 mils 0.090 mmTensile Strength 26 lbs/in 46 N/10 mmElongation 135% 135%Adhesion to Steel 40 oz/in 4.4 N/10 mmDielectric Strength 11,500 volts 11.5 kV*CAUTION: The above are typical values and should not be used in writing specifications. Customeris responsible to ensure product meets intended application requirements before approved for use.