13.07.2015 Views

Hoyt USA Recurve Manual 2000

Hoyt USA Recurve Manual 2000

Hoyt USA Recurve Manual 2000

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>Hoyt</strong> limbs are available in marked weights from 22# to 50# intwo pound increments. The weight marked on the lower limb ismeasured at a 28” standard A.M.O. (Archery Manufacturers andMerchants Organization) draw length. A.M.O. draw length ismeasured at 26 1/4” to the throat of the bow grip plus 1 3/4”.This produces an industry standard by which recurve bows aremeasured.Note: Your draw weight will change due to draw length. Add orsubtract approximately two pounds for each inch your drawlength is over or under the 28” standard.BOW ASSEMBLYInstalling Detent Limbs (Standard Risers)Install one limb in each pocket (the limb noting specifications isthe bottom limb). Carefully insert the limb bushing into thedovetail groove in the pocket. Push the limb forward until thedetent button engages. You should hear a “click” indicating thelimb is fully seated.6

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!