IMSolo-IV Expansion Option Quick Start Guide - ICS-IQ.com
IMSolo-IV Expansion Option Quick Start Guide - ICS-IQ.com
IMSolo-IV Expansion Option Quick Start Guide - ICS-IQ.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Operational ProceduresCapturing from External FireWire DrivesThe following procedure is re<strong>com</strong>mended to capture data fromExternal FireWire drives using the <strong>Expansion</strong> <strong>Option</strong>.1. Power OFF the <strong>IMSolo</strong>-<strong>IV</strong> unit.2. Connect the <strong>Expansion</strong> Box to the <strong>IMSolo</strong>-<strong>IV</strong> unit using the SETUPInstructions outlined in the section titled SETUP.3. Connect the appropriate FireWire data cable to the <strong>Expansion</strong> Box and to theExternal FireWire drive.4. Power ON the <strong>IMSolo</strong>-<strong>IV</strong> by pressing the unit’s Power ON button, located ontop corner of the unit’s back panel. The <strong>IMSolo</strong>-<strong>IV</strong> Forensics AdvancedInterface Control Console will be displayed.NOTE: If the <strong>IMSolo</strong>-<strong>IV</strong> fails to initialize properly. Power OFF the <strong>IMSolo</strong>-<strong>IV</strong>and wait approximately 20 seconds before powering ON.Drive SelectionPanelOperational Modes