60-982 LXI Wired Trigger Bus Adaptor - Pickering Interfaces

60-982LXI Wired Trigger Bus AdaptorWired Trigger Bus Adaptor60-982●●●●●●●Converts LVTTL to WTB SignalsConverts WTB to LVTTL SignalsSupports all Modes of WTB OperationManual or Remote ConfigurationInternally Terminated And Thru Line VersionsSupports All 8 LXI WTB ChannelsIdeal Solution For Adapting non LXITriggering to LXIThe 60-982 provides a effective method of adaptingtrigger signals from bench instruments to the LXI WiredTrigger Bus signalling standard. The 60-982 convertsM-LVDS signals on the WTB to Low Voltage TTL signalsand converts Low Voltage TTL signals to M-LVDS. All8 channels of the LXI WTB are supported in a singleadaptor.Each channel of the WTB can be configured eithermanually or through a digital I/O to be Disabled, Drivenor in Wired OR mode. The interface is fully compatiblewith the LXI WTB standard and counts as one node onthe bus.The adaptor is available in two versions, one havinga thru line connection for the WTB and the secondincluding a terminator.The 60-982 is an ideal solution to integrating productswith dedicated trigger facilities, such as oscilloscopes,spectrum analyzers or signal generators, into LXIsystems using the WTB.Power for the 60-982 is provided by an external AC/DCadaptor or DC power supply.WTBConnectorM-LVDSInterfaceM-LVDSInterfaceInputOutputInputOutputInputOutputLXI 0LXI 1LXI 2WTBConnectorWTBTerminationInputOutputInputOutputInputOutputLXI 0LXI 1LXI 2InputOutputLXI 3InputOutputLXI 3InputOutputLXI 4InputOutputLXI 4InputOutputLXI 5InputOutputLXI 5InputOutputLXI 6InputOutputLXI 6InputOutputLXI 7InputOutputLXI 7WTBConnectorDigital I/O ConfigurationManual ConfigurationFunctional Diagram for 60-982-001With Thru Line Connection for WTBDigital I/O ConfigurationManual ConfigurationFunctional Diagram for 60-982-002With Internal TerminationISSUE 3.1 JAN 2008LXI Switch & InstrumentationPickering Interfaces www.pickeringtest.com

TerminatorWired Trigger Bus60-982AdaptorThru-LineTerminatorSafety & CE ComplianceAll modules are fully CE compliant and meet applicable EUdirectives: Low-voltage safety EN61010-1:2001,EMC Immunity EN61000-6-1:2001, Emissions EN55011:1998.LXIDevice1LXIDevice2LXIDevice3Product Order CodesLXI WTB Adaptor, Thru LineLXI WTB Adaptor, Terminated60-982-00160-982-002TerminatorLXIDevice1Wired Trigger Bus 60-982AdaptorTerminatedLXIDevice2LXIDevice3Mating Connectors & CablingExamples of cabling available for the 60-982 are:40-977-511-1M40-978-701-1MCable, 50Ω SMB, Plug to Plug,1 Meter Length.Cable, 50Ω SMB Plug to 50Ω BNCPlug, 1 Meter Length.Please refer to the Pickering Interfaces “InterconnectionSolutions” catalog for a full list of connector/cablingoptions, including drawings, photos and specifications.This is available in either print or as a download.Typical application for the Thru Line and Terminatedversions of the 60-982 LXI WTB AdapterSpecificationLXI WTB Connectors:25-way Micro D connectorsconformant to LXI standard.60-982-001 uses one connector.60-982-002 uses two connectorswith thru line connections tomatch to WTB.LXI WTB Termination: Included in 60-982-001conformant to LXI Standard. WTBmust be externally terminated for60-982-002.I/O Signals:LXI WTB LoadingLXI WTB Mode:Power Requirements:Physical Size:Inputs and outputs on SMBconnectors. LVTTL (3.3V) signallevels.Input impedance: 10kΩ nominalOutput impedance: 50Ω nominalMinimum load impedance: 50ΩMinimum recommended pulsewidth is 10ns.Equivalent to the load of one LXIDevice.Each channel selectable to beDisabled, Driven, or Wired ORthrough manual configuration withDIP switches. Can be remotelycontrolled through digital I/O porton 25-way D-type connector.Requires 6V DC at 500mA.Supplied with universal AC/DCAdaptor, 500 mA complete withUK, USA and European supplyadaptors.100mm long84mm wide30mm highLatest DetailsPlease refer to our Web Site for Latest Product Details.www.pickeringtest.comOperating/Storage ConditionsOperating ConditionsOperating Temperature:Humidity:Altitude:Storage and Transport ConditionsStorage Temperature:Humidity:Altitude:LXI is the new standardfor Ethernet control ofinstrumentation. It is thenatural successor to GPIB(IEEE-488) incorporatingLAN connectivity, full webbrowser support, IVI driversand advanced triggeringcapability.0°C to 55°CUp to 95% non-condensing5000m-20°C to +75°CUp to 95% non-condensing15000mPickering Interfaces is aBoard level member of theLXI Consortium (www.lxistandard.org) and togetherwith Agilent Technologies was the first companyto release a fully compliant LXI device. Pickering isdeveloping a large range of products conforming tothe LXI standard and is constantly introducing newproducts in response to specific user demand. Forfurther information go towww.pickeringtest.com/lxi© Copyright (2007) Pickering Interfaces. All Rights ReservedPickering Interfaces maintains a commitment to continuous product development, consequently we reserve the right to vary from the description given in this data sheet.Pickering Interfaces are Strategic Level members of the LXI Consortium www.lxistandard.orgwww.pickeringtest.comE-Mail sales@pickeringtest.com