Windows 2000 Installation Guide - FTDI

More documents

Recommendations

Info

11 Windows 2000 Installation Guide· Locate the folder containing the latest drivers downloaded from the FTDI web site above andclick "Open", then click "OK". The PC autoselects the correct INF file, in this caseFTDIPORT.INF. Once Windows has found the required driver .INF file, click "Next" to proceed.© Future Technology Devices International Ltd. 2006
Installing FTDI Device Drivers12· Windows should then display a message indicating that the installation was successful. Click"Finish" to complete the installation for this port of the device.· If the device is based on the FT2232C, the second port must also be installed. Under Windows2000, this will occur automatically.· By examining the Device Manager (located in "Control Panel\System" then select the "Hardware"tab and click "Device Manger…") and viewing by connection ("View > Devices by connection"),the device appears as a "USB Serial Converter" with an additional COM port with the label "USBSerial Port". If the device is based on the FT2232C, two ports will be available from a compositeUSB device.© Future Technology Devices International Ltd. 2006
Page 1 and 2: Future Technology DevicesInternatio
Page 3 and 4: Welcome to the Windows 2000 Install
Page 5 and 6: Installing FTDI Device Drivers42.1
Page 7 and 8: Installing FTDI Device Drivers6· C
Page 9 and 10: Installing FTDI Device Drivers8· W
Page 11: Installing FTDI Device Drivers10·
Page 15 and 16: Uninstalling FTDI Devices143 Uninst
Page 17 and 18: Uninstalling FTDI Devices16© Futur
Page 19 and 20: Troubleshooting184.2 Windows 2000 f
Page 21 and 22: Troubleshooting204.4 FT232BM or FT2
Page 23 and 24: Contact Information226 Contact Info
Page 25: Index 24Index- D -Drivers 3, 4, 17,

Windows 2000 Installation Guide - FTDI

Create successful ePaper yourself

Delete template?

Save as template?