You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
AccessoriesTo meet the recommendations of the standards of the National <strong>Fire</strong><strong>Protection</strong> Association as published in their Pamphlet 20, currentedition, certain accessories are required for all fire pump installations.They will vary, however, to fit the needs of each individual installationand the requirements of the local insurance authorities. Sterlingprovides a wide range of fire pump fittings which include: concentricdischarge increaser, casing relief valve, eccentric suction reducer,increasing discharge tee, overflow cone, hose valve head, hosevalves, hose valve caps and chains, suction and discharge gauges,relief valve, automatic air release valve, flowmeter, and ball drip valve.No matter what the requirements, Sterling has a complete line ofaccessories available and can satisfy the requirements of eachinstallation.The charts reproduced below graphically illustrate the manyaccessories as well as the optional drives that are available with all<strong>Peerless</strong> fire pumps and packaged systems.<strong>Peerless</strong> Horizontal <strong>Fire</strong> <strong>Pump</strong>sHorizontalSteam TurbineFROMWATERSUPPLYValveCompound TypeSuction GaugeGauge Protector(some highpressure applications)EccentricSuction ReducerAutomatic AirRelease ValveDischargeGaugeTOWASTECasingReliefValveTeeElbowRelief ValveEnclosedCone(flanged)TO WASTE(with back pressure)ElbowTeeValveTOWASTEBuildingDrain ValveNipple HoseValveOutside Hose Valve Head(number of hose valves is variable)ValveFlow Meter ValveTEST LINE PIPE AND FITTINGSHose ValveCap & ChainTOHOSETOWASTEORSUPPLYTO SYSTEMDiesel EngineHorizontalElectric MotorConcentric Discharge Increaser(when discharge tee not used)Check ValveTeeValve<strong>Peerless</strong> Vertical <strong>Fire</strong> <strong>Pump</strong>sHorizontalSteam TurbineDiesel EngineWater Level Testing DeviceExtend to Strainer(well installation only)Basket Strainer(sump installation)Column(threaded orflanged)FROMWATER SUPPLYRightAngleGearDISCHARGEASSEMBLYVerticalElectricMotorDischarge Bowl(threaded or flanged)Intermediate BowlsBell SuctionDischargeGaugeTeeConcentric Discharge Increaser(when discharge tee not used)Automatic Air Release Valve(fittings and flange for engineor steam turbine drive)TeeRelief ValveEnclosedCone(flanged)TO WASTE(with back pressure)Check ValveValveElbowTeeTOWASTETeeBuildingDrain ValveValve Flow Meter ValveTEST LINE PIPE AND FITTINGSValveHose ValveCap & ChainTOHOSENipple HoseValveOutside Hose Valve Head(number of hose valves is variable)TOWASTEORSUPPLYTO SYSTEMSterling Fluid Systems (USA), Inc.P.O. Box 7026 • Indianapolis, IN 46207-7026Phone: (317) 925-9661 • Fax: (317) 924-7388Website: www.peerlesspump.comA member of the Sterling Fluid Systems GroupBrochure B-1500 The content of this brochure is subject to change without notice. © Copyright 2000 by Sterling Fluid Systems (USA), Inc.Printed in U.S.A.
Change language