Weekly Testing of Dedicated Smoke Control Dampers - Metasys ...

Smoke Control NAE ApplicationApplication File LocationThe Metasys system extended architecture Weekly Testing of Dedicated SmokeControl Dampers application for the smoke control NAE is located on the BranchProject Package (BPP) CD under the Metasys System Extended ArchitectureStandard Smoke Control Applications directory.Metasys System Extended Architecture ObjectsThis smoke control application resides on the smoke control NAE. Smoke controllogic screens are created with the Logic Connector Tool (LCT). System points,interlocks, MCOs, and alarms are configured with the System Configuration Tool(SCT). The damper used in the weekly test is Damper 6-1. The Damper 6-1 logicscreens show the logic for the damper. The Weekly Dedicated Damper Test screensshow the logic for the weekly test.The LCT logic is organized into two sections: Damper Control and WeeklyDedicated Damper Test. The Damper Control section controls Damper 6-1 beingused in the test. The Weekly Dedicated Damper Test section controls the actualdamper test and also includes Damper Alarm message screens and Damper TestSchedule screens.Weekly Testing of Dedicated Smoke Control Dampers - Metasys® System Extended ArchitectureApplication Note13