RC Lander Large Metal Retract Quick Fix Steps Drill 3mm hole here
RC Lander Large Metal Retract Quick Fix Steps Drill 3mm hole here
RC Lander Large Metal Retract Quick Fix Steps Drill 3mm hole here
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Make sure the self lock strap is in the correct position as shown after it islocked up tight. Otherwise it will prevent the board for installing correctly as shown below
The new modified front and internal plates can secure the PCB when the unit screwstogether and is fully tightened. If the side plates loosen, the micro switch might becomedamaged. This method with the nylon strap has passed over a 1000 cycles of testingand should help secure the micro switch properly to help prevent future problems.The upgraded 2 nd Generation versions have 2 screws on top and bottom of motor mount blockThis makes these upgraded versions easy to recognize.
Both Outside Mounting Plates are upgraded with thicker, stronger material inthe 2 nd Generation <strong>RC</strong> <strong>Lander</strong> <strong>Large</strong> <strong>Metal</strong> <strong>Retract</strong>sContact: max@parkrcmodels.comwww.parkrcmodels.com
Change language