Encryption Load Module - Ixia

Encryption Load ModuleSpecificationsNumber of ports, processors andsecurity co-processorsNetwork InterfacesNetwork Connector TypeApplication SupportIPSec FeaturesStatistics via IxVPNAddressingDiagnosticsAutomation2 per Load Module10/100/1000 Mbps Ethernet over copper or 1000mbps Ethernetover fiberRJ-45 or SFPIxVPN: VPN scalability and performanceIxChariot®: Enterprise application emulationIxNetwork: IP control plane emulationIxLOAD: SSL performance and scalability testingAH, ESP or a combinationEncryption algorithm: DES, 3DES, AES 128, AES 192, AES 256Encapsulation mode: Tunnel mode and transport modeHash/Authentication algorithm: MD5, SHA-1DH group: Group 1, Group 2, Group 5, Group 14, Group 15,Group 16Phase I authentication method: Certificates, Pre-shared keysTunnel lifetimePerfect Forward SecrecyTunnel capacity, tunnel setup latency, tunnel setup rate, tunnelattempts and failuresLatency statistics per phase (IKE phase and IPSec phase)Re-key attempts, failures, and re-key rateEncryption and decryption latency, encryption and decryptionthroughput, packets/bytes encrypted and decryptedReal-time statistics, CSV, and HTML test logsAggregate and per-tunnel statisticsEach emulated gateway has a unique IP and a unique MACaddressMultiple hosts behind each emulated gatewayMultiple Phase 2 SAs per Phase 1 SADiagnostic messages per-tunnel and per-phaseTcl API for automation and custom test case developmentIxVPN Test SuitesTunnel Capacity• Measures the rate at which tunnels are set up by the DUT• Reports setup rate as a function of the number of tunnelsestablished on the DUT26601 W. Agoura Rd. Calabasas, CA 91302 Sales: 1.877.367.4942 / Int’l: 1.818.871.1800P/N: 915-0505-01 www.ixiacom.com Page 2 of 4