ABS MK II - VWClub.BG

- S4 brake warning switchCut-out pressure: 120...150 barRenewed cut-in pressure: 100...110 barMax. perm. switch-on duration:- of pump motor: 2 min- solenoid valves 10 sNumber of ring gear teeth- Set value, front 43 teeth- Set value, rear 43 teethAir gap between wheel-speed sensor and ring gear cannot be adjusted.Tightening torques:Wheel-speed-sensor fastening screws- Set value: 10 NmWheel-brake-cylinder bleeder screws- Set value: 7...9 NmWheel-hub fastening screws- Set value: 265 NmTightening torques, front wheel brake:Fastening screws for brake anchor plate- Set value: 125 NmTightening torques, rear wheel brake:Fastening screws for brake anchor plate- Set value: 65 NmBrake-caliper fastening screws- Set value: 35 NmNote: Renew self-locking screws or tighten with locking compound.ELECTRICAL TERMINAL DIAGRAMTightening torque for fastening nuts or bolts at hydraulic modulator.Set value:1 = 15 Nm2 = 25 Nm3 = 25 Nm4 = 25 Nm5 = 10 Nm6 = 45 Nm