SKF 6229EN aktuell

www.lmotion.ru skf@lmotion.ru Тел. (495)-921-34-60PinningIf the guide values for the permissiblelateral force are exceeded (seetable) the carriage must be additionallyfixed by means of pinning orstop edges.The recommended dimensions forthe pin holes can be obtained fromthe drawings and table.S 10L 10W 4Usable pins:• tapered pin (hardened) or• straight pin DIN ISO 8734InstructionsFor production-related reasons theremay be pilot drill holes in the middleof the carriage at the recommendedpositions for pin holes († < S 10 ).They are suitable for drilling.If necessary, the pinning must becarried out in a different position(e.g. middle lube port), but must notexceed the dimension L 3 in longitudinaldirection (L 3 can be obtainedfrom the dimension tables for theindividual versions).Keep to dimensions W 2 and W 4 !Do not complete the pin holesuntil after mounting (see also generalmounting instructions - availablethrough your normal SKF contact).Standard width A, LAS 10N 9W 2Slim line U, LUSlim line high R, LRSizeDimensions (mm)Tapered pin (hardened) orstraight pin (DIN 6325)S 10 L 10 W 2 W 4 N 9 (max)15 4 18 26 38 6,020 5 24 32 53 7,525 6 32 35 55 9,030 8 36 40 70 12,035 8 40 50 80 13,045 10 50 60 98 18,056